EBC DP41107R Yellowstuff Aramid Rear Brake Pads for 91-05 Toyota MR2 Spyder

Vehicle Fitment

• 1991-1992 Toyota MR2 (SW20, 2.0L I4, RWD)
• 1991-1995 Toyota MR2 (SW20, 2.2L I4, RWD)
• 1993-1995 Toyota MR2 Turbo (SW20, 2.0L Turbo I4, RWD)
• 2000-2005 Toyota MR2 Spyder (ZZW30, 1.8L I4, RWD)

Fitment Notes

• Rear axle application only - do not install on front
• EBC recommends upgrading front pads to an equivalent or higher compound when upgrading rear pads
• Covers both the SW20 (2nd generation) and ZZW30 (3rd generation/Spyder) platforms
• Pad set includes two different pad shapes (98mm and 106mm length) to match inner and outer rear caliper positions

Features

• EBC Yellowstuff 1793 high-friction compound delivers 30-40% improved braking over OE pads
• Aramid fiber construction provides high strength, light weight, and thermal stability
• Exceptional cold bite - no warm-up period required for safe street driving
• Progressive braking behavior with increasing force under higher loads
• Zero brake fade under repeated heavy braking conditions
• Minimal rotor wear characteristics extend disc life
• Red Brake-In™ surface coating for instant safe braking after installation
• Fully shimmed, slotted, and chamfered construction for quiet operation
• Nucap NRS hook pad retention system eliminates pad delamination
• Dual-purpose street and track capability - suitable for drift, autocross, and trackday use

Specifications

• Part Number: DP41107R
• Pad Material: Aramid Fiber (Yellowstuff 1793 Compound)
• Pad Dimensions: 98 x 47 x 15mm / 106 x 47 x 15mm
• FMSI Pad Number: D528
• Friction Coefficient: 0.60 mu
• Position: Rear
• Pad Construction: Integrally Molded
• Rotor Type: Vented
• UPC: 840655023494

Included Components

• 4x EBC Yellowstuff Rear Brake Pads (one axle set)
• 1x Shim Set
• 1x Hardware Kit

Product Description

The EBC DP41107R Yellowstuff rear brake pads are a high-performance upgrade designed specifically for the Toyota MR2 platform, covering both the legendary SW20 (1991-1995) and the lightweight ZZW30 Spyder (2000-2005). Built around EBC's proven 1793 aramid fiber compound, these pads deliver a friction coefficient of 0.60 mu - a significant improvement over OE-spec pads - providing stronger, more consistent rear braking force whether driven aggressively on the street or pushed hard at a trackday or drift event.

As a mid-engine, rear-wheel-drive platform, the MR2 places considerable demand on its rear brakes during spirited driving and track use. The Yellowstuff compound is uniquely suited to this application with its ability to deliver strong initial bite from cold - eliminating the dangerous warm-up period common with most race-oriented pad materials - while maintaining fade-free performance at elevated temperatures. The progressive braking behavior gives drivers precise pedal modulation, which is critical for maintaining balance and control in a mid-engine chassis.

Each set includes four pads with two different pad shapes (98mm and 106mm lengths) to correctly match the inner and outer positions of the rear calipers. The pads feature EBC's proprietary red Brake-In™ surface coating for immediate safe performance after installation, along with edge chamfers and noise reduction shims for quiet street operation. The Nucap NRS hook retention system on the back plates ensures the friction material stays securely bonded under the most demanding conditions. EBC recommends pairing these rear pads with a matching front upgrade for balanced braking performance.