EBC GD7482 3GD Sport Dimpled Slotted Rear Rotors for 93-97 Toyota Land Cruiser

Vehicle Fitment

• 1993-1997 Toyota Land Cruiser (80 Series FZJ80 | 4.5L I6 1FZ-FE | 4WD)
• 1996-1997 Lexus LX450 (Base | 4.5L I6 1FZ-FE | 4WD)

Fitment Notes

• Fits the Toyota Land Cruiser FZJ80 (80 Series) platform only - does not fit later 100 Series (UZJ100) Land Cruiser models.
• All Toyota Land Cruiser 80 Series and Lexus LX450 models are 4WD only - no 2WD variants exist for this generation.
• Directional rotor - sweeping slots and dimple pattern must point toward the rear of the vehicle upon installation.
• Do not install upgraded rear brake pads unless the same upgrade is also fitted to the front axle.
• Designed for street, towing, and 4x4 use - not intended for racing or track day applications.

Features

• Dimpled and slotted 3GD Series surface draws cool air into the pad-rotor interface, reducing temperatures by up to 100°F to minimize brake fade under heavy towing and off-road use.
• Blind-drilled dimples degas brake pads without through-drilling, eliminating the stress crack risk associated with fully drilled rotors - a design EBC pioneered.
• Wide-aperture slots expel heat, dust, dirt, and debris for consistent pad-to-rotor contact throughout the service life.
• Slotted surface maintains flat and parallel pad wear, preventing groove formation common with non-slotted rotors.
• Silver anti-corrosion finish protects non-swept areas from rust and provides a clean sport appearance.
• Precision-machined from OE-spec grey cast iron with 100% runout and dimensional inspection before release.
• Passed European R90 brake safety certification standards for consistent performance under demanding conditions.

Specifications

• Part Number: GD7482
• Series: EBC 3GD Sport
• Position: Rear
• Construction: Vented, 1-Piece
• Surface Style: Dimpled and Slotted
• Rotor Diameter: 335mm (13.2 in)
• Rotor Thickness (New): 18mm
• Height: 103mm
• Center Bore: 106mm
• Bolt Holes: 6
• FMSI Pad Number: D606
• Finish: Silver Anti-Corrosion Coating
• Material: OE-Spec Grey Cast Iron
• Compatible with Stock Calipers: Yes
• Quantity: 2 Rotors per Set

Included Components

• 2x EBC 3GD Series Dimpled and Slotted Rear Brake Rotors

Product Description

The EBC GD7482 3GD Series Sport Rotors are a direct-fit rear brake upgrade for the 1993-1997 Toyota Land Cruiser 80 Series (FZJ80) and the 1996-1997 Lexus LX450, both running the 4.5L I6 1FZ-FE engine in 4WD configuration. Engineered with EBC's signature wide-aperture slots and blind-drilled dimples, these vented rear rotors actively cool the braking surface and degas pads without the structural risks of through-drilled holes - delivering noticeably stronger, more consistent stopping performance under the heavy towing and braking demands these trucks regularly face.

Precision-machined from OE-spec grey cast iron to a 335mm diameter and 18mm thickness, the GD7482 installs directly in place of stock rear rotors with no modifications required and is fully compatible with factory calipers. A 500-mile break-in period with progressive braking is recommended after installation. EBC recommends pairing with Greenstuff 6000 or Yellowstuff brake pads, and notes that any rear pad upgrade must be matched with an equivalent front upgrade to maintain balanced braking performance.