EBC DP32263C Redstuff Ceramic Front Brake Pads for 2016-2024 Mazda MX-5/Fiat 124

Vehicle Fitment

• 2016-2024 Mazda MX-5 Miata ND (Sport / Club / Grand Touring / RF, 2.0L I4, RWD) - without Brembo calipers
• 2017-2020 Fiat 124 Spider (Classica / Lusso / Abarth / Urbana, 1.4L Turbo I4, RWD)

Fitment Notes

• Front axle application only - for the rear, use EBC DP31775C
• Does not fit Mazda MX-5 Miata Club or RF models equipped with the optional Brembo brake package - those require EBC DP42286R
• Fiat 124 Spider and Mazda MX-5 Miata ND share the same front brake caliper and rotor package - this pad fits both platforms without modification
• Verify caliper type (standard single-piston vs. Brembo) before ordering on Club and RF trims

Features

• EBC Redstuff ceramic compound - synthetic aramid fiber enhanced with ceramic particles, engineered for lightweight sport and prestige vehicles
• Reduces brake dust by 60-90% versus OEM semi-metallic pads - zero steel fiber keeps alloy wheels cleaner with minimal maintenance
• Red Brake-In surface coating conditions the rotor and accelerates pad bed-in from the first stop
• Proven to reduce stopping distance by up to 13 meters from 100 mph versus factory pads
• No brake fade or drop-off under repeated hard braking - consistent front bite hot or cold
• Very low rotor scoring characteristics - helps extend front rotor service life
• Approved to ECE R90 brake safety regulation for most applications
• Nominal friction coefficient of 0.5 - progressive, confidence-inspiring front brake feel

Specifications

• Position: Front Axle
• FMSI Pad Number: D1903
• Rotor Type: Vented
• Rotor Diameter: 280mm
• Pad Height: 44mm
• Pad Thickness: 22mm
• Center Hole Diameter: 55mm
• Bolt Holes: 4
• Friction Coefficient: 0.5

Included Components

• 2x EBC Redstuff Ceramic Front Brake Pads (Left & Right)

Product Description

The EBC DP32263C Redstuff Ceramic Front Brake Pads are purpose-built for the 4th-generation Mazda MX-5 Miata ND (2016-2024) and its platform sibling, the Fiat 124 Spider (2017-2020). Built from EBC's synthetic aramid fiber compound blended with ceramic particles, Redstuff delivers noticeably stronger cold bite, excellent fade resistance, and a dramatic reduction in brake dust compared to the factory semi-metallic pads - keeping wheels cleaner and rotors lasting longer on these lightweight, driver-focused roadsters.

Installation is a direct OEM replacement at the front axle (standard caliper fitment only - not compatible with the optional Brembo package). Each pad ships with EBC's red Brake-In surface coating for immediate, safe braking from the first use. Full bedding may take up to 1,000 miles of urban driving, during which minor cold-start noise may occasionally occur. For a fully matched system, pair with EBC DP31775C at the rear for balanced braking performance front to back.