EBC DP31870C Redstuff Ceramic Rear Brake Pads for 10-14 Ford Mustang V6/V8 GT

Vehicle Fitment

• 2010-2014 Ford Mustang 3.7L V6
• 2013-2014 Ford Mustang 3.7L V6 (with Performance Package)
• 2010-2011 Ford Mustang 4.0L V6
• 2010-2011 Ford Mustang 4.6L V8 GT
• 2010-2014 Ford Mustang 5.0L V8 GT
• 2010-2014 Ford Mustang 5.0L V8 GT (Brembo Brake Package)
• 2012-2014 Ford Mustang Boss 302 5.0L V8

Fitment Notes

• Rear axle application only - sold as complete axle set (4 pads)
• Fits vehicles with 300mm vented rear rotors
• FMSI Pad Number: D1465
• For balanced brake performance, EBC recommends installing Redstuff pads on both front and rear axles
• Do NOT install upgrade pads on rear axle only - must upgrade front axle as well
• Bed-in period: up to 1,000 miles of urban driving required for full performance
• NOT recommended for track or racing use - for track applications, consider EBC Yellowstuff or Bluestuff

Features

• Aramid fiber-based ceramic compound enhanced with ceramic particles for superior performance
• Reduces brake dust by 60-90% compared to OEM semi-metallic pads
• Zero steel fiber content - dust washes off easily and won't etch wheel lacquer or alloy
• High friction from cold with improved bite as temperature increases
• 15% improvement in braking effect over OEM pads
• Capable of repeated heavy brake use without brake "fall-off"
• Very minimal disc/rotor damage characteristics extends rotor life
• EBC Brake-In surface coating accelerates pad bed-in and conditions rotor surface
• NUCAP NRS hook system on backplates prevents pad delamination
• Fully shimmed, chamfered, and slotted for quiet operation
• ECE R90 brake safety tested and approved

Specifications

• Part Number: DP31870C
• Series: Redstuff 3000 Series Ceramic
• Position: Rear
• FMSI Number: D1465
• Compound: Aramid Fiber with Ceramic Particles (NAO)
• Friction Coefficient: High
• Dust Level: Ultra-Low
• Rotor Compatibility: 300mm Vented
• Quantity: Axle Set (4 Pads)
• Operating Temperature: Street Use
• Bed-In Period: Up to 1,000 Miles
• Color: Red (with Brake-In coating)
• Backplate: NRS Hook System
• Warranty: 12 Months / 10,000 Miles

Included Components

• EBC Redstuff Ceramic Brake Pads (Qty: 4 - Complete Rear Axle Set)
• Noise Dampening Shims (Pre-Installed)

Product Description

The EBC DP31870C Redstuff Ceramic Brake Pads deliver premium low-dust braking performance for 2010-2014 Ford Mustang S197 applications. Engineered with EBC's advanced aramid fiber compound enhanced with ceramic particles, these pads reduce brake dust by up to 90% compared to OEM semi-metallic pads while providing a 15% improvement in braking effect. Unlike conventional brake compounds that use steel fibers, Redstuff utilizes zero steel content - the result is dust that washes off easily with a simple sponge rather than etching into wheel finishes. These pads deliver strong initial bite from cold and progressively improve as operating temperature increases, making them ideal for spirited street driving on muscle cars and performance vehicles. The pads arrive with EBC's Brake-In surface coating to accelerate bed-in and condition the rotor surface, though drivers should expect up to 1,000 miles of urban driving before the pads fully conform to the rotor profile and achieve maximum performance. Features include the NUCAP NRS hook system to prevent pad delamination, pre-installed noise dampening shims, and ECE R90 safety certification. For optimal brake balance, EBC recommends installing Redstuff pads on both front and rear axles. Not recommended for track or racing applications.