EBC DP41377R Yellowstuff Front Pads for 2007-2011 Lotus Exige S240/Cup 260 1.8SC

Vehicle Fitment

• 2008-2011 Lotus Exige S 240 (1.8L Supercharged I4, RWD) - Front
• 2007-2011 Lotus Exige Cup 260 (1.8L Supercharged I4, RWD) - Front
• 2007-2011 Lotus 2-Eleven (1.8L Supercharged I4, RWD) - Front

Fitment Notes

• Fits vehicles equipped with the factory AP Racing 4-piston front calipers and 308mm front rotors only
• Does NOT fit the standard Lotus Exige S2 (2006-2007) or any Lotus Elise - those use 2-piston calipers with 288mm rotors
• Measure your front rotor diameter before ordering - 308mm AP 4-pot caliper fitment only
• Do not fit upgrade pads to the rear unless the same upgrade grade is also fitted to the front

Features

• Aramid fiber compound with high friction from cold - no warm-up required for street use
• Stable friction coefficient of 0.48µ up to 450°C - progressively stronger under heat
• Red Brake-In surface coating conditions the rotor face and accelerates bed-in after install
• Fully shimmed, chamfered, and slotted for smooth, noise-free operation
• Zero brake fade under repeated heavy braking - race-developed compound
• Minimal rotor wear - compatible with AP Racing caliper and cast iron disc surfaces
• Copper-free 2021+ reformulation - environmentally compliant
• ECE R90 approved for street use

Specifications

• Part Number: DP41377R
• Position: Front
• FMSI Pad Number: DR032
• Compound: Yellowstuff 4000 Series
• Friction Material: Aramid fiber hybrid compound
• Pad Dimensions: 113 x 60 x 15mm
• Compatible Rotor Diameter: 308mm vented
• Compatible Caliper: AP Racing 4-Piston (factory Lotus Sport/Cup upgrade)
• Nominal Friction Coefficient: 0.48µ (stable to 450°C)
• Certification: ECE R90 approved
• Quantity: 1 set (left and right front pads)

Included Components

• 2x EBC Yellowstuff Front Brake Pads (left and right)

Product Description

The EBC DP41377R Yellowstuff front brake pads are engineered specifically for the 2007-2011 Lotus Exige Cup 260, Exige S 240, and 2-Eleven models fitted with the factory AP Racing 4-piston front caliper and 308mm rotor upgrade. These lightweight Lotus platforms demand pads that deliver strong cold bite, zero fade under repeated aggressive braking, and consistent feel - all of which the Yellowstuff compound delivers. The aramid fiber construction grips hard from the first cold press and gets progressively stronger as heat builds, making these pads equally effective on public roads and on circuit.

It is critical to verify your Exige is equipped with the factory 308mm AP 4-pot front brake package before ordering - standard 2006-2007 Exige S2 models and all Elise variants use a smaller 288mm 2-piston setup that requires a different pad. The red Brake-In surface coating shortens bed-in time by conditioning the rotor immediately after installation. For balanced braking performance, EBC recommends pairing with a matching Yellowstuff rear pad set.