EBC DP51771NDX Bluestuff NDX Front Brake Pads for 2006-2008 Chevrolet Corvette

Vehicle Fitment

• 2006-2008 Chevrolet Corvette Z06 (C6, 7.0L LS7 V8, RWD) - Front

Fitment Notes

• Front axle fitment only - sold as a 2-wheel (one axle) set
• Fits the C6 Z06 exclusively - designed for the 6-piston Brembo front calipers and 14 in (355mm) front rotors unique to the Z06
• Does not fit the C6 Base, C6 Z51, or C6 Grand Sport - these use different front caliper and rotor applications
• Does not fit the C6 ZR1 - ZR1 uses a separate Brembo front brake application
• Verify front rotor diameter is 14 in (355mm) before ordering

Features

• High-friction Bluestuff NDX compound at 0.52 Mu - engineered for the sustained high-heat demands of the Z06's 6-piston Brembo front setup
• Excellent cold bite with progressive, linear pedal feel - strong initial braking without a heat warm-up period
• NUCAP NRS mechanical hook bonding system provides 5x greater shear strength over standard bonded pads
• Chemical interlayer triples bond strength compared to conventional organic pad construction
• Deep V-grooves channel heat, dust, and debris away from the pad contact surface during track use
• Pre-scorched surface for accelerated bed-in - suitable for track day use from first installation
• R90-approved for EU road legality; fully road-safe in USA and Asia markets
• Gentler on rotors than comparable hard sintered race compounds

Specifications

• FMSI Pad Number: D1185
• Position: Front Axle
• Compatible Caliper: 6-Piston Brembo (Z06 exclusive)
• Compatible Rotor Diameter: 14 in (355mm)
• Rotor Thickness: 1.3 in (32mm)
• Friction Coefficient: 0.52 Mu (NDX grade)
• Max Rotor Temperature: up to 550°C / 1,030°F
• Drivetrain: RWD

Included Components

• 4x EBC Bluestuff NDX brake pads (one front axle set)

Product Description

The EBC DP51771NDX Bluestuff NDX pads are a full-race front brake compound built specifically for the 2006-2008 Chevrolet Corvette C6 Z06. Matched to the Z06's exclusive 6-piston Brembo front calipers and 14 in (355mm) cross-drilled front rotors, these pads deliver the high-friction stopping power that the 505 hp LS7 demands under hard driving. The NDX compound at 0.52 Mu provides strong, confident front bite from cold with a progressive pedal feel, making them equally effective on a spirited canyon run or a full track day session without requiring a prolonged warm-up period.

EBC's NUCAP NRS hook bonding system and chemical interlayer ensure the friction material stays firmly bonded to the backing plate under the sustained thermal stress that the Z06's front brakes encounter on circuit. The pre-scorched pad surface shortens bed-in significantly, so you can evaluate stopping performance quickly and safely. Note that this pad is specific to the Z06 - base C6, Z51, Grand Sport, and ZR1 variants all use different front brake configurations and require separate EBC applications.