EBC USR7122 USR Slotted Front Rotors 2003-2009 Nissan 350Z/Infiniti G35 Brembo

Vehicle Fitment

• 2003-2004 Infiniti G35 Coupe (Manual, 3.5L VQ35DE V6, RWD, with factory Brembo brake package)
• 2007 Infiniti G35 Journey (3.5L VQ35HR V6, RWD, with factory Brembo brake package)
• 2003-2009 Nissan 350Z (Base, Enthusiast, Touring, Performance, Track, Grand Touring, 35th Anniversary Edition, Nismo; 3.5L VQ35DE/VQ35HR V6, RWD, with factory Brembo brake package)

Fitment Notes

• Fits factory Brembo brake package only - vehicles without Brembo calipers require USR7120 (front)
• G35 Brembo fitment is limited to 2003-2004 Coupe (Manual) and 2007 Journey - all other G35 years/trims with Brembo should be verified before ordering
• Do not install upgrade brake pads on the rear axle unless the same upgrade is also fitted to the front
• Do not remove Thermic Black coating with brake cleaner - it clears naturally within the first 10-20 stops

Features

• Fine narrow-profile slot pattern promotes pad degassing and eliminates the wind noise associated with wide-slot rotors
• Slots expel heat, water, dust, and debris from the pad surface for consistent, fade-resistant braking
• Promotes flat and parallel pad wear, preventing the record-groove patterns common with non-slotted rotors
• Thermic Black anti-corrosion coating protects rotor surfaces between uses and during storage
• Manufactured from G3000 R90-approved premium grey iron for long service life and thermal stability
• Precision-machined in the UK to OE tolerances - direct bolt-on to factory Brembo caliper setup
• Compatible with EBC Greenstuff, Yellowstuff, and Redstuff brake pad compounds
• Sold as a pair - includes both left and right front rotors

Specifications

• Position: Front Axle
• Disc Style: Vented, Slotted
• Disc Diameter: 324mm (12.8 in.)
• Disc Thickness: 30mm
• Minimum Disc Thickness: 28.4mm
• Disc Height: 49mm
• Center Hole Diameter: 68mm
• Number of Bolt Holes: 5
• FMSI Pad Reference: D960
• Finish: Thermic Black Anti-Corrosion Coating
• Material: G3000 Premium Grey Iron

Included Components

• 2x EBC USR7122 Sport Slotted Front Brake Rotors (Left & Right)

Product Description

The EBC USR7122 USR Series Sport Slotted Front Rotors are purpose-built for 2003-2009 Nissan 350Z and select Infiniti G35 models equipped with the factory Brembo brake package. Machined to fit the larger 324mm Brembo rotor hat and caliper layout, these rotors deliver a direct bolt-on upgrade over OEM with no modifications required. The fine narrow-profile slot design degasses brake pads under load, expels heat and debris from the contact surface, and ensures consistent parallel pad wear - all while operating significantly quieter than wide-slot alternatives.

For a complete matched brake system, pair with EBC Greenstuff, Yellowstuff, or Redstuff front brake pads. Vehicles without the factory Brembo package use a smaller 296mm rotor and require USR7120 instead. The Thermic Black anti-corrosion coating needs no removal before installation - it wears away naturally in the pad sweep area within the first few stops.