EBC USR7126 USR Slotted Front Rotors for 02-06 Acura RSX/2006-2011 Honda Civic

Vehicle Fitment

• 2002-2006 Acura RSX (Base, Type-S; 2.0L K20A3/K20Z1 I4, FWD)
• 2004-2005 Honda Civic Si Hatchback (EP3; 2.0L K20A3 I4, FWD)
• 2006-2011 Honda Civic (DX, DX-G, EX, EX-L, LX, LX-S, Hybrid, Hybrid-L; 1.3L/1.8L I4, FWD)
• 2010-2015 Honda CR-Z (1.5L Hybrid I4, FWD)

Fitment Notes

• Does NOT fit 2006-2011 Honda Civic Si - the 8th-gen Si uses a larger 300mm front rotor and requires a different part number
• Do not install upgrade brake pads on the rear axle unless the same upgrade is also fitted to the front
• Do not remove Thermic Black coating with brake cleaner - it clears naturally within the first 10-20 stops

Features

• Fine narrow-profile slot pattern promotes pad degassing and eliminates the wind noise associated with wide-slot rotors
• Slots expel heat, water, dust, and debris from the pad surface for consistent, fade-resistant braking
• Promotes flat and parallel pad wear, preventing record-groove patterns common with non-slotted rotors
• Thermic Black anti-corrosion coating protects rotor surfaces between uses and during storage
• Manufactured from G3000 R90-approved premium grey iron for long service life and thermal stability
• Precision-machined in the UK to OE tolerances - direct bolt-on, no modifications required
• Compatible with EBC Greenstuff, Yellowstuff, and Redstuff brake pad compounds
• Sold as a pair - includes both left and right front rotors

Specifications

• Position: Front Axle
• Disc Style: Vented, Slotted
• Disc Diameter: 262mm (10.3 in.)
• Disc Thickness: 21mm
• Disc Height: 47mm
• Center Hole Diameter: 64.2mm
• Number of Bolt Holes: 5
• FMSI Pad Reference: D1394
• Finish: Thermic Black Anti-Corrosion Coating
• Material: G3000 Premium Grey Iron

Included Components

• 2x EBC USR7126 Sport Slotted Front Brake Rotors (Left & Right)

Product Description

The EBC USR7126 USR Series Sport Slotted Front Rotors deliver a quiet, high-performance upgrade for the 2002-2006 Acura RSX, 2004-2005 Honda Civic Si Hatchback, 2006-2011 Honda Civic, and 2010-2015 Honda CR-Z. The fine narrow-profile slot design degasses brake pads under load, clears moisture and debris from the contact surface, and ensures consistent parallel pad wear - all while operating significantly quieter than wide-aperture alternatives. Built from G3000 grey iron and precision-machined in the UK, these rotors install directly onto the factory front caliper with no modifications.

For best results, pair with EBC Greenstuff, Yellowstuff, or Redstuff front brake pads. Important note: the 2006-2011 Civic Si uses a larger 300mm front rotor and is not compatible with USR7126. The Thermic Black anti-corrosion coating needs no removal before installation and wears away naturally in the pad sweep area within the first few stops.