DV8 Offroad FBTL4-02 Spec Series Steel Front Winch Bumper 2024-2026 Toyota Land

Vehicle Fitment

• 2024-2026 Toyota Land Cruiser 250 Series (All Trims, including 1958 Edition)

Fitment Notes

• Retains factory parking sensors, adaptive cruise control (ACC), and front camera.
• Does NOT retain factory fog lights - fog light openings are not accommodated in the Spec Series design.
• Does NOT fit the factory front skid plate - a replacement skid plate (bumper to front cross member) is included.
• Cutting is required for installation - this is not a fully bolt-on fitment.
• Maximum compatible winch dimensions: 20.9" L x 6.3" W x 10" H.
• Estimated installation time: approximately 6.5 hours.
• Welded-in zip tie tabs provide clean wire management for lighting and winch wiring.

Features

• Hidden winch mount accepts a wide range of winch sizes (up to 20.9" x 6.3" x 10") for full recovery capability without protruding external hardware.
• 20-inch center light bar mount supports a single or dual-row 20" LED light bar for expanded forward visibility on trail and overland use.
• Dual 3-inch pod light mounts in the side pods provide dedicated auxiliary lighting positions for off-road visibility.
• Four elongated top slots allow lights to be positioned and hidden behind the factory bumper mesh for a clean, stealthy lighting solution.
• Two 1-inch thick D-ring recovery mounts accept 3/4-inch shackles for vehicle extraction and recovery operations.
• Improved approach clearance over the factory bumper, accommodating larger tire fitment and reducing front obstacle contact on technical terrain.
• Satin black accent panels complement the micro-texture powder coat for a two-tone, premium appearance that integrates with the Land Cruiser 250's styling.
• 3.5mm and 5mm steel construction delivers heavy-duty front-end protection against rocks, brush, and trail hazards.

Specifications

• Part Number: FBTL4-02
• Series: Spec Series
• Material: 3.5mm and 5mm Steel
• Finish: Micro-Texture Black Powder Coat / Satin Black Accent Panels
• Weight: 104 lbs
• Winch Mount: Hidden (Max Winch: 20.9" L x 6.3" W x 10" H)
• Light Bar Mount: 1x 20-inch center (single or dual row)
• Pod Light Mounts: 2x 3-inch (side pods)
• Hidden Light Slots: 4x elongated top slots (behind factory mesh)
• D-Ring Mounts: 2x 1-inch thick (accepts 3/4-inch shackles)
• Factory Sensors/ACC Retained: Yes
• Factory Camera Retained: Yes
• Factory Fog Lights Retained: No
• Factory Skid Plate Compatible: No (replacement included)
• Installation: Cutting required, bolt-on
• Estimated Install Time: ~6.5 hours
• Warranty: 1-Year against defects in materials and workmanship

Included Components

• 1x Spec Series Front Winch Bumper (Steel, Powder Coated)
• 1x Replacement Skid Plate (bumper to front cross member)
• 1x Hardware Kit
• 1x Installation Guide

Product Description

The DV8 Offroad FBTL4-02 is the Spec Series front winch bumper for the 2024-2026 Toyota Land Cruiser 250 Series, engineered for overland and off-road builds that demand real steel protection without sacrificing the Land Cruiser's modern driver-assist capabilities. Built from 3.5mm and 5mm steel and weighing 104 lbs, it delivers heavy-duty front-end protection while retaining the factory adaptive cruise control, parking sensors, and front camera - a critical feature on a platform as tech-forward as the 250 Series. A hidden winch mount handles winches up to 20.9" x 6.3" x 10", and a 20-inch center light bar mount plus dual 3-inch pod light positions and four hidden top slots give builders extensive auxiliary lighting options.

The Spec Series bumper improves approach clearance over the factory unit and accommodates larger tire fitment, making it equally suited to serious off-road use and long-distance overland travel. Micro-texture black powder coat is paired with satin black accent panels for a premium two-tone finish that integrates with the 250 Series's styling. A replacement skid plate running from the bumper to the front cross member is included to replace the incompatible factory unit. Owners should note that cutting is required for installation (estimated at 6.5 hours) and that the factory fog lights are not retained in this design.