DBA DBA42361S 4000 Series T3 Slotted Rear Rotor 332mm for Lotus Evora/Exige

Vehicle Fitment

• 2009-2011 Lotus Evora (3.5L V6, 208kW)
• 2009-2015 Lotus Evora 2+2 (3.5L V6, 206kW)
• 2011-2017 Lotus Evora S / S 2+2 (3.5L V6 SC, 257kW)
• 2013-2020 Lotus Exige S / Sport 350 (3.5L V6 SC, 257kW, Coupe)
• 2014-2018 Lotus Exige S / Sport 350 (3.5L V6 SC, 257kW, Convertible)
• 2018-2021 Lotus Exige Sport 380 (3.5L V6 SC, 280kW, Coupe and Convertible)
• 2018-2019 Lotus Exige Cup 430 (3.5L V6 SC, 321kW, Coupe)
• 2018-2021 Lotus Exige Sport 410 (3.5L V6 SC, 305kW, Coupe)

Fitment Notes

• Rear axle only -- sold individually, 2 required per vehicle
• Bolt pattern: 5x114.3mm PCD
• Centering diameter: 70.05mm
• T3 bi-directional slot -- universal left/right fitment
• Direct OE replacement -- no modifications required

Features

• 4000 Series T3 bi-directional patented slot design
• CNC machined tri-symmetrical slots -- quieter, more responsive pedal feel
• Kangaroo Paw (KP) ventilation -- 144 diamond and teardrop pillars
• Up to 30% increase in surface area vs. straight vane design
• Up to 20% improvement in cooling efficiency vs. straight vane design
• High carbon alloyed iron casting -- Thermal Stability Profiling (TSP)
• Rust-preventive coating on non-friction surfaces
• Direct OE replacement -- bolt-on fit
• Made in Australia
• 12-month / 20,000km / 12,000-mile warranty

Specifications

• Series: 4000 Series T3
• Position: Rear
• Surface: Slotted (T3 bi-directional)
• Vane Design: Kangaroo Paw (KP)
• Outer Diameter: 332mm
• Height: 63.3mm
• Brake Disc Thickness: 26mm
• Minimum Thickness: 24mm
• Centering Diameter: 70.05mm
• Bolt Holes: 5
• Pitch Circle Diameter (PCD): 114.3mm
• Quantity: Sold individually
• Barcode: 9316391403971
• Warranty: 12 months / 20,000km / 12,000 miles

Included Components

• 1x DBA 4000 Series T3 rear slotted brake rotor

Product Description

The DBA DBA42361S is a 4000 Series T3 slotted rear brake rotor engineered for Lotus Evora and Exige models equipped with the Toyota-sourced 3.5L 2GR-FE and 2GR-FZE V6 engine family. At 332mm diameter with a 5x114.3mm bolt pattern, it covers the full Evora production run from 2009 through 2017 and the Exige Sport 350, Sport 380, Cup 430, and Sport 410 from their respective introductions through the end of Exige production in 2021. The T3 slot design is DBA's most advanced single-piece rotor surface treatment -- building on the T2 bi-directional slot with additional CNC-machined tri-symmetrical slots that increase the number of exit points for brake pad friction dust and gases. The result is a quieter, more responsive pedal feel with enhanced consistency across repeated hard stops. The T3 pattern is universal left/right, eliminating the need to specify driver or passenger side. Beneath the surface, DBA's proprietary Kangaroo Paw ventilation pillars -- 144 diamond and teardrop-shaped posts -- deliver up to 30% more surface area and 20% better cooling efficiency compared to conventional straight-vane designs, keeping rotor temperatures lower under sustained braking loads. Each rotor is cast from high carbon alloyed iron and undergoes DBA's Thermal Stability Profiling (TSP) process to stabilize the metallurgy against the thermal stresses of repeated hard use. Two rotors are required for a complete rear axle replacement. Made in Australia and backed by DBA's 12-month / 20,000km / 12,000-mile warranty.