DBA DBA2663E-10 EnShield Rear Rotor for Subaru BRZ Legacy Outback FR-S Toyota 86

Vehicle Fitment

• 2013-2022 Subaru BRZ (ZC6, 2.0L FA20D, RWD, all trims - Base, Premium, Limited, Series.Blue, Series.HyperBlue, Series.Yellow, TS, tS Sport-tech - excluding BRZ models with optional Brembo rear brakes) - Rear Axle
• 2013-2016 Scion FR-S (ZN6, 2.0L FA20D, RWD, Base) - Rear Axle
• 2018-2020 Toyota 86 (ZN6, 2.0L FA20D, RWD, Base, GT, Hakone Edition, TRD Special Edition - excluding models with Brembo brake package) - Rear Axle
• 2010 Subaru Legacy (BR, 2.5i, 2.5i Limited, 2.5i Premium, 2.5GT, 3.6R, 3.6R Limited, 3.6R Premium, AWD) - Rear Axle
• 2010-2012 Subaru Outback (BR, 2.5i, 2.5i Limited, 2.5i Premium, 3.6R, 3.6R Limited, 3.6R Premium, AWD) - Rear Axle

Fitment Notes

• Sold individually - two rotors are required for a complete rear axle replacement.
• The "-10" suffix denotes a 10-stud-hole hub pattern, accommodating both 5x100mm and 5x114.3mm bolt circle configurations across the applicable Subaru and Toyota/Scion platforms.
• Subaru BRZ and Toyota 86 / Scion FR-S: Applies to models with the standard 290mm vented rear disc. BRZ / 86 variants fitted with the optional Brembo rear brake package use a different, larger rotor specification - confirm your existing rear rotor diameter before ordering.
• This is an EnShield (E suffix) standard smooth rotor - not slotted or cross-drilled. It is the OE-profile replacement rotor with full-surface corrosion protection coating. For a T2 slotted version on the same 290mm application, refer to DBA2663S-10.
• This rotor (290mm, 18mm vented) is distinct from the DBA2659E-10 (286mm, 10mm solid), which fits the 2008-2021 WRX and 2009-2013 Forester platform. Do not interchange these part numbers.

Features

• EnShield full-surface corrosion protection: a zinc/aluminium water-based coating is applied to the entire rotor surface - including the hat, non-friction areas, and vane channels - and then baked on. This prevents the cosmetic rust and corrosion that immediately forms on unprotected bare iron rotors, keeps the rotor looking new through its service life, and is particularly effective in wet and humid climates.
• EnShield rotors do not require pre-installation cleaning with brake cleaner prior to fitting - the baked-on coating is ready to install straight from the box.
• Vented disc construction with DBA's Kangaroo Paw ventilation system - 144 diamond and teardrop-shaped internal pillars - delivers up to 20% improved cooling efficiency compared to conventional straight-vane vented rotors, supporting the rear braking demands of the BRZ/86/FR-S and Legacy/Outback platforms under spirited driving.
• Street Series OE-profile replacement - manufactured to DBA's above-OEM standards for dimensional accuracy, with CBN (Cubic Boron Nitride) machine-turned friction surface to minimise disc thickness variation and reduce brake shudder or pedal judder.
• Centre-split core casting design enhances heat transfer and thermal efficiency across the rotor body.
• Direct bolt-on OE-replacement fit - no caliper or bracket modifications required.

Specifications

• Position: Rear axle
• Series: Street Series EnShield (plain/smooth)
• Rotor Type: One-piece, vented, non-directional
• Outside Diameter: 290mm (11.41 in.)
• Nominal Thickness: 18mm
• Discard Thickness: 18mm
• Overall Height: 64mm
• Centre Hole Diameter: 58mm
• Stud/Lug Holes: 10 (dual bolt pattern: 5x100mm and 5x114.3mm)
• Surface Type: Smooth (OE profile)
• Finish: Full-surface EnShield zinc/aluminium baked-on coating
• Warranty: 12 months or 20,000 km from date of purchase
• Part Number: DBA2663E-10

Included Components

• 1x DBA DBA2663E-10 Street Series EnShield Rear Brake Rotor (single rotor - order 2 for a complete rear axle set)

Product Description

The DBA DBA2663E-10 Street Series EnShield Rear Brake Rotor is a direct OE-replacement vented rear rotor for the 290mm rear disc specification shared by the Subaru BRZ (2013-2022), Scion FR-S (2013-2016), Toyota 86 (2018-2020), 2010 Subaru Legacy, and 2010-2012 Subaru Outback. This 290mm vented rear disc is distinct from the 286mm solid rear disc used by the WRX/Forester platform - the DBA2663E-10 is the correct part for these vehicles and is not interchangeable with DBA2659E-10.

The EnShield full-surface corrosion protection coating is the key differentiator of this rotor over a standard bare-iron OE replacement. DBA applies a zinc/aluminium water-based coating to the entire rotor - hat, vanes, and all non-friction areas - and bakes it on at the factory. This eliminates the surface rust that forms almost immediately on uncoated rotors, particularly in humid and coastal environments. The coating is durable across the full service life of the rotor, and unlike some paint-only coatings does not require pre-installation cleaning - the DBA2663E-10 is ready to fit straight out of the box. The vented disc construction is paired with DBA's Kangaroo Paw internal ventilation - 144 diamond and teardrop-shaped pillars - for up to 20% better cooling efficiency than conventional straight-vane designs, which is meaningful for the rear axle on the lightweight RWD BRZ/86 platform under enthusiast use.

The "-10" suffix denotes the 10-stud-hole dual-bolt-pattern hub, covering both 5x100mm and 5x114.3mm configurations across the applicable platforms. Sold individually; two units are required for a complete rear axle replacement. For drivers who prefer the added bite of T2 bi-symmetrical slots on this same 290mm application, the companion part DBA2663S-10 is available. Backed by DBA's 12-month/20,000km manufacturer's warranty.