DBA DB1170XP Xtreme Performance Front Brake Pads for Subaru WRX/Forester Nissan

Vehicle Fitment

• 2001-2007 Subaru Impreza WRX (GD/GG, AWD) - 4-Pot Sumitomo Caliper
• 2003-2007 Subaru Forester SG (AWD) - 4-Pot Sumitomo Caliper only (see Fitment Notes)
• Nissan Skyline R32 GTS-T (RWD/AWD) - 4-Pot Sumitomo Caliper
• Nissan Skyline R32 GTS-4 (AWD) - 4-Pot Sumitomo Caliper
• Nissan Skyline R32 GT-R (AWD) - 4-Pot Sumitomo Caliper
• Nissan Skyline R33 GTS-T (RWD) - 4-Pot Sumitomo Caliper
• Nissan Skyline R34 GT-T (RWD) - 4-Pot Sumitomo Caliper
• Nissan 200SX S14 (RWD) - 4-Pot Sumitomo Caliper
• Nissan 200SX S15 (RWD) - 4-Pot Sumitomo Caliper
• Nissan 300ZX Z32 (RWD) - 4-Pot Sumitomo Caliper

Fitment Notes

• Fits vehicles equipped with a 4-Pot Sumitomo front caliper only - caliper type must be confirmed before ordering
• 2003-2007 Subaru Forester SG: two caliper variants exist - 4-Piston (DB1170XP fits) and 2-Piston (DB1491XP required). Verify pad shape against pad blueprint before purchasing
• Wear sensors are not included with this pad set
• Best paired with DBA T3 slotted 4000 Series or 5000 Series rotors for maximum performance
• All DBA Performance pads are NSFI certified (low copper / carbon-fibre formulation)

Features

• Xtreme Performance (XP) friction compound delivers high initial bite and maintains consistent friction levels across a wide temperature range - from cold street use to sustained high-heat track conditions
• Carbon-fibre, low-copper NSFI-certified formulation reduces brake dust emissions and is gentle on wheel finishes
• Thermal Stability Profiling (TSP) - a process unique to DBA - improves cold friction effectiveness and significantly reduces bedding-in time
• All friction surfaces are factory scorched to accelerate the bedding process and minimize the risk of green fade during initial use
• Application-specific chamfers machined into each pad to reduce noise, vibration, and harshness (NVH) under braking
• Centre temperature-stability slot facilitates heat dissipation and maintains friction consistency at elevated pad temperatures
• High-quality steel backing plates provide structural rigidity and resist wear and deformation under sustained braking loads
• European-made triple-layer elastomeric coated shims included to enhance noise-dampening characteristics across all operating conditions
• Asbestos-free compound with no harmful heavy metals - safe for both the driver and the environment

Specifications

• Position: Front Axle
• Caliper Compatibility: 4-Pot Sumitomo (required)
• Pad 1 Dimensions: 119.3mm (L) x 71.1mm (W) x 14mm (H)
• Pad 2 Dimensions: 119.3mm (L) x 62.1mm (W) x 14mm (H)
• Pad Set Weight: 1.8 kg
• Wear Sensor: Not included
• Friction Compound: Carbon-fibre, low-copper (NSFI certified)
• DBA Pad Series: Xtreme Performance (XP suffix)

Included Components

• 2x Inner Brake Pads
• 2x Outer Brake Pads
• 4x Triple-layer elastomeric coated shims (fitted to pads)

Product Description

The DBA DB1170XP is a front axle Xtreme Performance brake pad set engineered specifically for vehicles running a 4-Pot Sumitomo front caliper - a configuration shared across some of the most iconic Japanese performance platforms, including the Subaru Impreza WRX (2001-2007), Subaru Forester SG (2003-2007, 4-piston variant), Nissan Skyline R32/R33/R34, Nissan 200SX S14/S15, and Nissan 300ZX Z32. The XP compound has been developed by DBA as a step up from street performance pads, targeting drivers who demand stronger, more consistent braking across a wider temperature range - whether commuting daily, running police pursuit applications, towing, or participating in club-level track days.

The XP friction formulation delivers high initial bite that is immediately noticeable from cold, while DBA's proprietary Thermal Stability Profiling (TSP) process ensures the compound maintains stable friction output as temperatures climb under hard use. The friction surface is factory scorched prior to dispatch, which pre-conditions the pad and reduces the green fade period that is common with new brake pads on street vehicles. Each pad is machined with application-specific chamfers to reduce NVH under braking, and a centre slot facilitates continuous heat dissipation, keeping operating temperatures within the optimal friction window. Triple-layer European-made elastomeric shims are factory-fitted to suppress vibration and brake squeal across all conditions.

Before ordering, it is essential to confirm that your vehicle is equipped with the 4-Pot Sumitomo front caliper. Subaru Forester SG owners in particular should verify their caliper specification, as the SG was offered with both 4-piston and 2-piston caliper variants; the DB1170XP only suits the 4-piston application. For best results, DBA recommends pairing these pads with their T3 slotted 4000 Series or 5000 Series rotors. The DB1170XP is the ideal brake pad upgrade for enthusiasts seeking genuine performance gains without compromising daily driveability.