Cometic PRO2020T Top-End Gasket Kit for 86-92 Toyota Supra / Cressida 7M-GTE

Vehicle Fitment

• 1986-1992 Toyota Supra (Base & Turbo) (7M-GE / 7M-GTE 3.0L I6, RWD / Turbocharged & Naturally Aspirated)
• 1986-1992 Toyota Cressida (Base & Luxury) (7M-GE / 7M-GTE 3.0L I6, RWD / TA & NA)

Fitment Notes

• "T" series gasket kit is for top-end (head gasket / cam seals) only - not a full engine rebuild / bottom-end kit.
• Does not include any bottom-end bearings or gaskets (oil pan, crank seals, etc.).
• Ensure your engine uses the 84 mm bore 7M-block; variant bore sizes may require checking. (".051" compression spec.)
• Mixing 7M-GE and 7M-GTE head parts requires confirming turbo- vs. non-turbo components; install torque specs differ slightly.

Features

• MLS (Multi-Layer Steel) head gasket for superior sealing under thermal stress and higher pressure.
• Designed for both naturally aspirated (7M-GE) and turbocharged (7M-GTE) versions.
• Includes camshaft seals to prevent oil leaks at both front and rear cam positions.
• Timing cover seal included to maintain proper sealing in head-to-block interface.
• Engineered to OEM form, fit, function for tight tolerances required by the 7M series.
• High-temperature resistant construction materials to withstand heat cycling in older engine blocks.
• Perfect for restoration or performance builds that want "stock plus" reliability.
• Pre-fitting to 84 mm bore; spec ".051 in" compressed thickness ensures correct compression ratio and fit in stock setup. :contentReference[oaicite:0]{index=0}

Specifications

• Bore size: **84 mm** standard. :contentReference[oaicite:1]{index=1}
• Compressed head gasket thickness: **0.051 in** for head gasket element. :contentReference[oaicite:2]{index=2}
• Material: MLS for head gasket; includes cam seals and timing cover seal. :contentReference[oaicite:3]{index=3}
• Position: head gasket (all 6 cylinders), camshaft front & rear seals, timing cover seal. :contentReference[oaicite:4]{index=4}
• Engine(s): 7M-GE (naturally aspirated) & 7M-GTE (turbo) 3.0L inline-6. RWD setup. :contentReference[oaicite:5]{index=5}
• Fitment confirmed through 1992. 1993+ unconfirmed. :contentReference[oaicite:6]{index=6}

Included Components

• 1x MLS Cylinder Head Gasket (84 mm bore, .051" compressed thickness)
• 2x Camshaft Seals (front & rear)
• 1x Timing Cover Seal

Product Description

The Cometic PRO2020T Street-Pro Top-End Gasket Kit is built for Toyota's 7M engine family (both GE and GTE variants), covering core top-end sealing components. It includes a high-quality multi-layer steel head gasket sized at 84 mm bore with .051" compressed thickness to maintain compression and prevent leakage in both natural and turbocharged setups. Camshaft seals (front & rear) and a timing cover seal are incorporated so that all critical sealing surfaces on the head and cover are addressed in one package.

This kit is ideal for enthusiasts restoring a Supra or Cressida from 1986 through 1992, whether running the stock 7M-GE or the higher-stressed 7M-GTE. Proper bore verification is essential since other bore sizes or modified heads may require different gasket thickness or bore diameter. Installation should follow the factory torque sequence and spec; ensure surfaces are flat and clean, and inspect related components (cam covers, timing cover) for warpage or damage. Fitment is confirmed through 1992. Use on later years or other engine types is unconfirmed.