Camburg CAM-310005 1" Uniball Upper Arms for 1996-2004 Tacoma & 1996-2002 Toyota

Vehicle Fitment

• 1996-2004 Toyota Tacoma (Pre-Runner, 2WD/4WD, 2.4L I4 / 2.7L I4 / 3.4L V6)
• 1996-2002 Toyota 4Runner (2WD/4WD, 2.7L I4 / 3.4L V6)

Fitment Notes

• Designed for 1-3 inches of lift - these arms correct suspension geometry for lifted applications and are not intended for stock ride height use
• Compatible with both Pre-Runner (2WD) and 4WD Tacoma configurations
• Compatible with both 2WD and 4WD 4Runner configurations
• Designed for off-road use only - not intended for on-highway use

Features

• FK 1.00" PTFE-lined uniball bearing pre-installed, replacing the factory ball-joint for greater strength, misalignment capacity, and usable wheel travel
• 0.156"-thick wall round tubing provides superior rigidity and impact resistance over the factory stamped steel arms
• Engineered with increased caster and corrected camber curve to restore proper suspension geometry on lifted trucks and SUVs
• Tubes are CNC laser cut and CNC bent, then MIG welded in precision fixtures for consistent geometry across every set
• Sandblasted and steel gray powder-coated finish for long-term corrosion resistance
• Polyurethane frame pivot bushings with greaseable zerk fittings for routine field maintenance
• Heat-treated stainless steel uniball mis-alignment spacers machined in-house at Camburg
• Designed and manufactured in the USA using FARO laser scan arm precision OEM geometry modeling

Specifications

• Part Number: CAM-310005
• Uniball Size: FK 1.00" PTFE-Lined (Pre-Installed)
• Position: Front Upper Control Arms (UCAs)
• Lift Range: 1-3 inches
• Tube Wall Thickness: 0.156 inches
• Arm Construction: CNC Laser Cut & MIG Welded Tubular Steel
• Finish: Sandblasted, Steel Gray Powder-Coat
• Spacer Material: Heat-Treated Stainless Steel
• Bushings: Polyurethane with Greaseable Zerk Fittings
• Quantity: 2 Arms per Kit
• Made In: USA

Included Components

• 2x CNC Tubular Upper Control Arms with FK 1.00" PTFE-Lined Uniballs Pre-Installed (Left and Right)
• 1x Set of Heat-Treated Stainless Steel Uniball Mis-Alignment Spacers
• 2x Polyurethane Frame Pivot Bushings with Greaseable Zerk Fittings
• 1x Hardware Kit (all necessary mounting hardware)

Product Description

The Camburg CAM-310005 upper control arms are a proven suspension upgrade for the 1996-2004 Toyota Tacoma (Pre-Runner and 4WD) and 1996-2002 Toyota 4Runner, engineered to address the geometry and strength limitations of the factory upper arms when running 1-3 inches of lift. Replacing the OEM ball-joint with an FK 1.00" PTFE-lined uniball bearing unlocks more misalignment range and usable wheel travel, while the 0.156"-thick wall tubular construction handles the lateral and vertical loads of off-road driving far better than the factory stamped steel arms. Built-in caster correction and an optimized camber curve bring the truck back into proper alignment at lifted ride heights where the stock arms cannot.

Every set is built entirely in-house at Camburg's USA facility using CNC laser-cut tubing, MIG welded in precision fixtures, then sandblasted and steel gray powder-coated. The uniballs arrive pre-installed, and greaseable polyurethane pivot bushings simplify routine maintenance on the trail or in the shop. All necessary hardware is included for a straightforward bolt-on installation, making this one of the most complete and best-validated UCA upgrades available for the first-generation Tacoma and N180 4Runner platforms.