Brembo 09.5568.21 UV Coated Front Rotor for 1994-2002 Volvo 850 S70 V70 C70 S90

Vehicle Fitment

• 1994-1997 Volvo 850 (All trims - Base, GLT, T5, Turbo; 280mm front disc configuration)
• 1998-2000 Volvo S70 (All trims - Base, SE, T5, GLT; 280mm front disc configuration)
• 1997-2000 Volvo V70 (FWD, AWD/XC; 280mm front disc configuration)
• 1998-2004 Volvo C70 (Coupe/Convertible, all trims - LPT, HPT, Turbo; 280mm front disc configuration)
• 1997-1998 Volvo S90
• 1997-1998 Volvo V90

Fitment Notes

• Front axle fitment only - sold as a set of 2 rotors per box
• Applies to vehicles equipped with the standard 280mm front brake configuration only - Volvo 850 R, T-5R, V70 R, and other high-performance variants equipped with the upgraded 302mm or 305mm front brake setup require a different rotor; confirm your front rotor diameter before ordering
• V70 XC (Cross Country/AWD) standard brake configuration uses this 280mm rotor; V70 R and similar performance models do not
• Volvo OE cross-references: 31262092, 272312

Features

• UV paint treatment on all non-friction surfaces - including internal venting chambers - delivers superior corrosion resistance right out of the box
• Water-based, solvent-free UV paint process - environmentally responsible with low energy consumption compared to conventional coating methods
• Vented disc design promotes airflow between rotor faces for improved heat dissipation during repeated or spirited braking
• High-carbon cast iron construction minimizes brake noise and vibration for a refined driving experience
• Direct OE-equivalent replacement - fully interchangeable with original equipment with no modifications required
• ECE-R90 certified - meets European safety standards for replacement brake discs
• Electronically balanced to tight tolerances, minimizing runout and pedal pulsation
• Includes fixing screw kit with all hardware required for installation

Specifications

• Position: Front (Left and Right)
• Disc Type: Vented
• Outside Diameter: 280 mm (11.02 in)
• Nominal Thickness: 24 mm
• Minimum Thickness: 22 mm
• Lug Hole Count: 5
• Surface Finish: UV Coated / Smooth Plain
• Material: High-Carbon Gray Cast Iron
• ABS Tone Ring: Not Included
• Volvo OE Cross-References: 31262092, 272312
• Brembo Line: Prime (OE Replacement)

Included Components

• 2x Brembo UV Coated Vented Front Brake Rotors
• 1x Fixing Screw Kit (all mounting hardware included)

Product Description

The Brembo 09.5568.21 is a UV-coated vented front brake rotor from the Brembo Prime line, designed for the Volvo P80 platform (850, S70, V70, C70) and the full-size S90/V90 models equipped with the standard 280mm front brake configuration. It cross-references Volvo OE part numbers 31262092 and 272312, and installs as a direct bolt-on replacement with no modifications required. Both rotors are included per box.

An important note for P80 Volvo owners: two front brake sizes were available across the 850/S70/V70/C70 lineup - 280mm and 302mm (or 305mm for R models). The 280mm was the standard fitment across most trims; the larger size was offered as an upgrade and came standard on the 850 R, T-5R, and V70 R. Confirm your existing front rotor diameter before ordering to ensure you select the correct replacement. Brembo's UV paint treatment protects the vented disc's internal chambers and outer surfaces from corrosion, and high-carbon cast iron alloy delivers improved heat management and reduced noise compared to standard-grade alternatives.