Brembo P85127N Ceramic Front Brake Pads for 2010-2018 Audi A6/A7/A8 Quattro C7

Vehicle Fitment

• 2016-2018 Audi A6 (C7, Premium, Premium Plus, Sport, 2.0T TFSI / 3.0T TFSI, FWD)
• 2012-2018 Audi A6 Quattro (C7, Premium, Premium Plus, Prestige, TDI, Competition, 2.0T / 3.0T TFSI / 3.0L TDI, AWD)
• 2012-2018 Audi A7 Quattro (C7, Premium, Premium Plus, Prestige, TDI, Competition, 3.0T TFSI / 3.0L TDI, AWD)
• 2010-2018 Audi A8 Quattro (D4/D4.5, Base, L, L TDI, 3.0T TFSI / 4.0T / 6.3L W12, AWD)

Fitment Notes

• Front axle position only - fits vehicles with 356mm OD x 34mm front rotor and standard (non-AMG, non-Sport) brakes
• Does not fit vehicles with sport brake package or larger front rotor diameters - verify VIN before ordering
• 2016 A6 and A7: fitment split between 345mm and 356mm rotors - confirm rotor size via VIN
• Pad wear sensor is not included - sold separately (Brembo recommends replacing sensor at every pad change)
• Brake system: Teves

Features

• Premium NAO Ceramic compound delivers low dust, quiet front-axle braking for large luxury/executive platforms
• Factory thermal scorching process reduces initial fade and eliminates break-in period
• OE Direct Moulding Pressing Process ensures precise pad-to-caliper geometry across C7 and D4 Teves systems
• Multi-layer ESE (Elastomer-Steel-Elastomer) red shim controls heat transfer and eliminates vibration-induced noise
• Chamfered and slotted pad design improves cooling and reduces NVH under braking
• Prepared for OE pad wear sensor - sensor port ready, no bracket modification required
• ECE-R90 certified for international braking safety compliance
• Ceramic compound keeps alloy and multi-spoke wheels significantly cleaner between service intervals

Specifications

• Part Number: P85127N
• Series: Premium NAO Ceramic OE Equivalent
• FMSI Number: D1549
• Position: Front Axle
• Brake System: Teves
• Friction Material: NAO Ceramic
• Rotor Compatibility: 356mm OD x 34mm
• Pad Width: 193 / 193.2 mm
• Pad Height: 70.8 / 73.7 mm
• Nominal Thickness: 20 mm
• Shims: Included (Multi-layer ESE)
• Wear Sensor: Prepared (not included)
• OE Cross Reference: 4G0698151M, 4H0698151D, 4H0698151G
• Warranty: 2 Years

Included Components

• 1x Set of Front Brake Pads (4-pad set - covers both sides of front axle)
• 1x Multi-layer ESE Shim Kit
• 1x Hardware and Lubricant Kit

Product Description

The Brembo P85127N is a Premium NAO Ceramic front brake pad set engineered as a direct OE replacement for Audi C7 and D4 platform vehicles equipped with Teves front brake systems and 356mm rotors. Covering the A6, A7 Quattro, and A8 Quattro, this pad is formulated to deliver quiet, low-dust braking appropriate for the daily and long-distance demands of full-size executive vehicles. Factory thermal scorching means these pads perform reliably from the first stop with no extended bedding-in required.

Built to Brembo's OE Direct Moulding standards, the P85127N is pressed to exact caliper geometry for a clean, noise-free fit in the Teves front caliper. The multi-layer ESE red shim controls vibration and heat, while the ceramic compound keeps large-diameter wheels looking clean between service visits. Rotor diameter must be confirmed prior to ordering - the 2016 A6 and A7 split between 345mm and 356mm fitments depending on trim and build date.