Brembo 09.D618.1X Xtra Drilled Rear Rotor for 2007-2021 Toyota Tundra Sequoia

Vehicle Fitment

• 2007-2021 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, Trail), 4.6L V8 / 4.7L V8 / 5.7L V8, 2WD/4WD
• 2008-2021 Toyota Sequoia (SR5, Limited, Platinum), 4.6L V8 / 4.7L V8 / 5.7L V8, 2WD/4WD
• 2008-2021 Toyota Land Cruiser (Base), 5.7L V8, 4WD
• 2008-2021 Lexus LX570 (Base), 5.7L V8, 4WD

Fitment Notes

• Fits rear axle only - all four vehicles listed share the same 345mm rear brake specification on this platform generation
• Does not fit 2022+ Toyota Tundra or 2023+ Toyota Sequoia - these use a new platform with a different rear rotor specification
• Does not fit 2022+ Toyota Land Cruiser (300 Series) or 2022+ Lexus LX600 - different platform and brake specification
• Sold as a single rotor (1x per box); two required per rear axle
• Verify rear rotor diameter (345mm) on your specific vehicle before ordering - some early Tundra trims used a smaller rear rotor

Features

• Brembo Xtra cross-drilled holes improve heat evacuation and gas dispersal from the braking surface for increased fade resistance under heavy use
• Drilled surface improves initial bite and wet-weather braking grip compared to a plain vented rotor
• Full-surface UV coating protects the braking band, hat, and internal ventilation chambers from corrosion without pre-installation cleaning required
• Brembo Pillar Vented Technology (PVT) channels airflow internally for over 40% greater resistance to thermal cracking versus conventional vane systems
• High-carbon cast iron construction minimizes vibration and brake noise for a quieter, more controlled braking feel
• ECE R-90 certified for safety and performance compliance
• Electronically balanced at the factory to minimize runout and vibration straight out of the box
• Sporty drilled appearance enhances wheel aesthetics without sacrificing reliability or longevity

Specifications

• Position: Rear Axle
• Disc Type: Vented, Cross-Drilled (Xtra)
• Surface: UV Coated
• Diameter: 345mm (13.58 in.)
• Number of Bolt Holes: 5
• Centering Diameter: 112mm
• Units per Box: 1

Included Components

• 1x Brembo Xtra Cross-Drilled UV Coated Rear Brake Rotor (09.D618.1X)
• 1x Fixing screw kit with all hardware required for installation

Product Description

The Brembo 09.D618.1X is a performance-grade rear brake rotor from Brembo's Xtra line, engineered for the Toyota Tundra (2007-2021), Toyota Sequoia, Toyota Land Cruiser, and Lexus LX570 - all sharing the same 345mm rear brake specification across this generation. The cross-drilled surface is designed to disperse heat, gases, and moisture from the braking interface more effectively than a plain rotor, delivering sharper initial bite and maintaining consistent pedal feel under sustained heavy braking. Brembo's Pillar Vented Technology (PVT) works alongside the drilled surface to further increase airflow and crack resistance internally.

A solvent-free UV coating protects the entire rotor surface from corrosion right out of the box - no pre-cleaning needed before installation. The rotor bolts on directly with no modifications required. Brembo recommends replacing both rear rotors as a pair and pairing with Brembo NAO/Ceramic or Low Met brake pads for optimal performance. Always perform a proper bedding procedure after installation.