Brembo 09.N234.11 UV Coated Front Rotor for 2011-2021 Jeep Grand Cherokee 330mm

Vehicle Fitment

• 2011-2021 Jeep Grand Cherokee (WK2) - Laredo, Laredo E, Limited, Limited X, Overland, Summit, Trailhawk, Altitude, High Altitude, Upland, 75th Anniversary, 80th Anniversary, SRT, Trackhawk (3.6L V6, 5.7L V8 HEMI, 6.4L V8 HEMI, 6.2L V8 Supercharged; RWD & 4WD)
• 2011-2020 Dodge Durango (WD) - SXT, Express, Crew, Crew Plus, Heat, R/T, Citadel, Rallye, Limited, GT, GT Plus, Special Service, Pursuit, SRT, SRT Hellcat (3.6L V6, 5.7L V8 HEMI, 6.4L V8 HEMI, 6.2L V8 Supercharged; RWD & AWD)

Fitment Notes

• This is the standard 330mm front brake rotor (Brake Code BRY). Verify your vehicle's brake sales code before ordering. Durango and Grand Cherokee models with the Tow N' Go heavy-duty brake package (Brake Code BR4/BR6) use a larger 350mm front rotor and are NOT compatible with this part.
• Does NOT fit Grand Cherokee SRT or Trackhawk models when equipped with factory 380mm or 400mm Brembo front calipers - those configurations require a 380mm or 400mm rotor specific to the SRT/Trackhawk brake package.
• This rotor IS compatible with non-SRT-brake Grand Cherokee and Durango SRT/Trackhawk trim vehicles that retain the standard 330mm front brake assembly.
• This rotor is NOT sided - a single part number fits both the left (driver) and right (passenger) front positions.
• Sold individually - two rotors are required for a complete front axle replacement.
• Replaces Dodge/Jeep OE part numbers 52124762AB, 52124762AC, and 52124762AD.

Features

• Brembo Prime Line OE-equivalent design - engineered as a direct replacement for the factory 330mm front rotor on WK2 Grand Cherokee and WD Durango platforms, with no caliper bracket changes or modifications required for installation.
• UV coating applied to the braking surface, outer diameter, and hub using a solvent-free, water-based process - delivering superior corrosion resistance that exceeds OE standards while maintaining a clean, factory-fresh appearance out of the box.
• Pillar Vented Technology (PVT) - Brembo's patented internal pillar venting maximizes airflow through the rotor, providing up to 40% greater resistance to thermal cracking compared to conventional vane-vented designs.
• High-carbon cast iron construction minimizes brake noise and vibration while enhancing thermal stability and heat dissipation - critical for the wide range of engine outputs and driving conditions covered by this application.
• Precision electronic balancing during production minimizes lateral runout, eliminating brake pedal pulsation and vibration across all driving conditions from daily commuting to highway towing.
• ECE R-90 certified - independently validated to meet European automotive safety and performance standards, confirming OE-equivalent stopping power and reliability.
• Non-sided design - a single part number fits both driver and passenger front positions, simplifying ordering and inventory.
• Intelligent part marking - part number and minimum discard thickness are stamped directly onto the rotor for easy identification at service intervals.
• Includes fixing screw hardware kit - all required installation fasteners are included in the box.

Specifications

• Position: Front (Left or Right - not sided)
• Rotor Type: Vented (Internally Ventilated)
• Outside Diameter: 330mm (12.99")
• Nominal Thickness: 32mm (1.26")
• Minimum Discard Thickness: 30.5mm (1.20")
• Hat Height: 55mm (2.17")
• Centering Bore Diameter: 72mm (2.83")
• Number of Bolt Holes: 5
• Venting: Pillar Vented Technology (PVT)
• Coating: UV Coated (braking surface, outer diameter, and hub)
• Material: High-Carbon Cast Iron
• Applicable Brake Code: BRY (Standard Anti-Lock Brakes)
• Dodge/Jeep OE Cross-References: 52124762AB / 52124762AC / 52124762AD
• UPC: 8020584224885
• Units Per Box: 1

Included Components

• 1x Brembo 09.N234.11 UV Coated Front Disc Brake Rotor
• 1x Fixing screw/hardware kit for installation

Product Description

The Brembo 09.N234.11 is a Prime Line UV Coated vented front disc brake rotor engineered as a direct OE-equivalent replacement for the Jeep Grand Cherokee WK2 (2011-2021) and Dodge Durango WD (2011-2020). Replacing FCA OE part numbers 52124762AB, 52124762AC, and 52124762AD, this 330mm rotor serves as the standard front brake replacement across one of the most versatile platform pairings in the American SUV and crossover segment - covering every engine variant from the 3.6L Pentastar V6 through the supercharged 6.2L Hellcat V8, and every trim from the base Laredo to the range-topping Trackhawk and SRT Hellcat when equipped with the standard 330mm brake package.

Built from high-carbon cast iron and featuring Brembo's Pillar Vented Technology (PVT), the 09.N234.11 maximizes thermal efficiency through its patented internal venting geometry - achieving up to 40% greater crack resistance than conventional vane-vented designs. The UV coating covers the entire rotor surface using a solvent-free, environmentally responsible process that outperforms factory corrosion protection and allows installation directly from the box without brake cleaner prep. Precision electronic balancing minimizes lateral runout, keeping pedal feel smooth and consistent across the full life of the rotor.

Before ordering, confirm your vehicle's front brake sales code. This rotor applies to the standard BRY brake package (330mm vented front rotors). Grand Cherokee and Durango models equipped with the heavy-duty Tow N' Go brake package (BR4/BR6, 350mm front rotors) or factory SRT/Trackhawk Brembo caliper assemblies (380mm or 400mm front rotors) require a different rotor specification. This rotor is not sided and fits both front positions. Two are required for a complete front axle service. For optimal braking performance, Brembo recommends replacing rotors and pads together and pairing with Brembo NAO Ceramic or Low-Met brake pad formulations.