Brembo 09.B266.11 UV Coated Vented Front Brake Rotor for Infiniti Nissan Models

Vehicle Fitment

• 2003-2006 Infiniti FX35 (All Trims, 3.5L V6, AWD)
• 2003-2006 Infiniti FX45 (All Trims, 4.5L V8, AWD)
• 2003-2008 Nissan Maxima (All Trims, 3.5L V6, FWD)
• 2003-2007 Nissan Murano (All Trims, 3.5L V6, AWD/FWD)
• 2004-2008 Infiniti G35 (Sedan & Coupe, 3.5L V6, RWD/AWD)
• 2005-2009 Nissan 350Z (All Trims, 3.5L V6, RWD)
• 2005-2006 Nissan Altima (SE-R Trim, 3.5L V6, FWD)
• 2006-2010 Infiniti M35 (All Trims, 3.5L V6, RWD/AWD)
• 2006-2010 Infiniti M45 (All Trims, 4.5L V8, RWD)
• 2008-2011 Infiniti EX35 (All Trims, 3.5L V6, RWD/AWD)
• 2009-2012 Infiniti G37 (Sedan, Coupe & Convertible, 3.7L V6, RWD/AWD)
• 2009-2012 Nissan 370Z (All Trims incl. Nismo, 3.7L V6, RWD)
• 2011-2012 Infiniti G25 (All Trims, 2.5L V6, RWD/AWD)
• 2011-2012 Infiniti M37 (All Trims, 3.7L V6, RWD/AWD)
• 2011-2013 Infiniti M56 (All Trims, 5.6L V8, RWD/AWD)
• 2011-2014 Nissan Murano (All Trims, 3.5L V6, AWD/FWD)
• 2012-2013 Infiniti M35h (All Trims, 3.5L V6 Hybrid, RWD)
• 2013 Infiniti EX37 (All Trims, 3.7L V6, RWD/AWD)
• 2014-2019 Infiniti Q70 (All Trims, 3.7L V6 / 5.6L V8, RWD/AWD)
• 2014-2015 Infiniti QX50 (All Trims, 3.7L V6, RWD/AWD)
• 2014-2017 Infiniti QX70 (All Trims, 3.7L V6 / 5.0L V8, AWD/RWD)
• 2015 Infiniti Q40 (All Trims, 3.7L V6, RWD/AWD)
• 2015-2019 Infiniti Q70L (All Trims, 3.7L V6 / 5.6L V8, RWD/AWD)

Fitment Notes

• 2005-2006 Nissan Altima fitment applies to SE-R trim with 3.5L V6 only - does not fit standard 2.5L I4 Altima variants.
• Infiniti G35 fitment covers both Sedan (2004-2006) and Coupe (2004-2008) body styles with 3.5L V6.
• Sold individually - two rotors required for a complete front axle replacement.
• OE Reference: 40206CA010

Features

• UV coating applied to braking surfaces, outer diameter, and disc hub for complete corrosion protection without solvents or harmful chemicals.
• Brembo's patented Pillar Vented Technology (PVT) optimizes airflow through the rotor, increasing thermal crack resistance by more than 40% compared to standard venting designs.
• High-carbon gray cast iron construction absorbs and dissipates heat efficiently, minimizing brake noise, judder, and vibration under daily and performance driving conditions.
• Direct OEM replacement engineered to meet or exceed original manufacturer material and dimensional specifications for a precise, no-modification installation.
• Composite construction (iron disc with composite hat) reduces unsprung weight while maintaining structural rigidity under thermal load.
• Precision-balanced design with strict tolerances for rotor runout and thickness variation, minimizing brake pedal pulsation and steering wheel shimmy.
• UV coating provides a clean, shiny metallic finish that remains visible through open-spoke wheels - aesthetically aligned with premium Infiniti and Nissan platforms.
• Included fixing screw kit secures the rotor to the hub during installation, preventing rotor walk-off during bleeding and pad bedding procedures.
• New intelligent marking location displays part number and minimum thickness directly on the rotor hat for quick inspection and compliance verification.
• Manufactured by Brembo in Italy - the same supplier used by numerous OEM programs for Nissan and Infiniti platforms.

Specifications

• Position: Front
• Rotor Type: Vented
• Surface Type: Solid (non-drilled, non-slotted)
• Outside Diameter: 320 mm (12.60 in.)
• Nominal Thickness: 28.00 mm
• Discard (Minimum) Thickness: 26.00 mm
• Center Hole Diameter: 68.00 mm (2.68 in.)
• Overall Height: 49.2 mm (1.93 in.)
• Lug / Stud Holes: 5
• Material: Gray Cast Iron (High Carbon)
• Finish: UV Coated - Rust Resistant
• Construction: Composite (vented disc with separate hat)
• Weight: 20.56 lbs. (per rotor)
• OEM Cross Reference: 40206CA010

Included Components

• 1x Brembo UV Coated Vented Front Brake Rotor (09.B266.11)
• 1x Fixing Screw Kit (rotor retention hardware)

Product Description

The Brembo 09.B266.11 is a premium UV coated vented front brake rotor engineered as a direct OEM replacement for a wide range of Infiniti and Nissan platforms spanning model years 2003 through 2019. Built from high-carbon gray cast iron, this rotor excels where it matters most - under braking load. The elevated carbon content within the alloy structure actively dampens vibration and suppresses brake noise, delivering the quiet, confident stop feel that Infiniti and Nissan owners expect from their vehicles. Brembo's patented Pillar Vented Technology (PVT) further separates this rotor from standard replacement options by introducing a unique pillar shape and positioning within the venting channels that dramatically improves internal airflow, increasing resistance to thermal cracking by over 40% when compared to conventional vented rotor designs.

What distinguishes this rotor visually and functionally is its industry-leading UV coating process. Unlike traditional e-coat or paint finishes, Brembo's solvent-free UV coating is applied across the braking plate surfaces, outer diameter, and disc hub - providing complete protection against corrosion from the moment the rotor leaves the factory. This means no surface prep, no brake cleaner wipe-down required before installation, and no unsightly rust blooming on new rotors straight out of the box. The coating also maintains a clean, shiny metallic appearance through open-spoke wheel designs, keeping the front brake assembly looking as sharp as the vehicles it serves. Each rotor ships with a complete fixing screw kit and clearly marked minimum thickness information stamped directly on the hat for easy inspection throughout the rotor's service life.

This rotor is sold individually, so two units are required for a full front axle service. It is a confirmed fitment for the Nissan FM platform and its derivatives, covering the Maxima, Murano, 350Z, 370Z, Altima SE-R, Infiniti FX35, FX45, G35, G37, G25, M35, M45, M37, M56, M35h, EX35, EX37, Q70, Q70L, Q40, QX50, and QX70. It is ideal for owners looking to restore OEM-spec braking performance with a rotor that is actually trusted by OEM programs worldwide - not just a lookalike. For best results, Brembo recommends pairing these rotors with Brembo NAO Ceramic or Low-Metallic brake pads and performing a proper bedding procedure after installation.