Brembo 09.8485.1X Xtra Drilled Front Rotor for 03-09 Nissan 350Z/Infiniti G35

Vehicle Fitment

• 2003-2009 Nissan 350Z (Coupe/Roadster, RWD, 3.5L V6 -- all trims)
• 2003-2004 Infiniti G35 Coupe (RWD, 3.5L V6)
• 2003-2004 Infiniti G35 Sedan (RWD, 3.5L V6)

Fitment Notes

• Front position only -- sold individually (one rotor per listing)
• RWD models only -- does not fit AWD (x) variants
• Replaces OE Nissan part number 40206CD005
• Designed for vehicles equipped with Brembo front calipers (OEM or aftermarket)
• Rotors and pads should be replaced together for optimal braking performance
• Professional installation required; alignment of brake hardware recommended after install

Features

• Brembo Xtra series cross-drilled brake rotor
• Pillar vented internal design
• High carbon cast iron construction
• UV-coated braking surface
• Cross-drilled holes for improved cooling and bite
• Solvent-free environmentally friendly UV coating
• ECE-R90 / UNECE R 90 certified
• Minimum thickness indicator marking
• Direct OEM replacement fit
• 2-year warranty

Specifications

• Position: Front
• Series: Brembo Xtra (cross-drilled)
• Diameter: 324 mm (12.76 in.)
• Thickness: 30 mm
• Minimum Thickness: 28.6 mm
• Height: 49 mm
• Centering Diameter: 68 mm
• Bolt Holes: 5
• Disc Type: Ventilated / Pillar vented
• Material: High carbon cast iron
• Finish: UV coated
• Tightening Torque: 108 Nm
• OE Cross Reference: Nissan 40206CD005
• Certification: ECE-R90 / UNECE R 90

Included Components

• 1x Brembo Xtra front brake rotor (09.8485.1X)

Product Description

The Brembo 09.8485.1X is an Xtra series cross-drilled front brake rotor engineered as a direct replacement for the 2003-2009 Nissan 350Z and 2003-2004 Infiniti G35 (RWD). Sized at 324mm diameter and 30mm thick, it matches the OE Brembo caliper specification on the 350Z Track trim and all G35 RWD models equipped with factory Brembo hardware. The cross-drilled holes serve a dual purpose: improving wet-weather bite by channeling water away from the contact surface and enhancing heat dissipation to reduce brake fade during sustained hard driving.

Constructed from high carbon cast iron and finished with Brembo's solvent-free UV coating, the Xtra rotor resists corrosion on non-contact surfaces while maintaining a clean, factory-grade appearance. The pillar venting design increases internal cooling efficiency and adds structural rigidity. Brembo includes intelligent minimum thickness markings directly on the rotor for easy service inspections. This rotor carries ECE-R90 / UNECE R 90 homologation and is backed by a 2-year warranty. Sold individually -- two are required per vehicle for a front axle replacement.