Borne Off-Road BNWS-004-500BK 2" Black Wheel Spacers for 1995-2023 Toyota Tacoma

Vehicle Fitment

• 1995-2004 Toyota Tacoma (4WD only - 2.4L I4, 3.4L V6)
• 2001-2023 Toyota Tacoma (2.7L I4 [2001-2023], 4.0L V6 [2005-2015], 3.5L V6 [2016-2023])
• 1996-2000 Toyota 4Runner (2.7L I4, 3.4L V6)
• 2003-2024 Toyota 4Runner (4.0L V6, 4.7L V8 [2003-2009])
• 2010 Toyota 4Runner (2.7L I4)
• 2000-2006 Toyota Tundra (3.4L V6 [2000-2004], 4.0L V6 [2005-2006], 4.7L V8 [2000-2006])
• 2001-2007 Toyota Sequoia (4.7L V8)
• 2007-2014 Toyota FJ Cruiser (4.0L V6)
• 2003-2009 Lexus GX470 (4.7L V8)
• 2010-2022 Lexus GX460 (4.6L V8)
• 1996-1997 Lexus LX450 (4.5L I6)

Fitment Notes

• Fits vehicles with 6x139.7mm bolt pattern, 106mm center bore, and M12x1.5 stud thread only
• Does not fit vehicles equipped with 8-inch BD22 differential - verify differential type before purchasing
• Does not fit 1995-2004 Tacoma 2WD models with 2.4L I4 or 3.4L V6 engines
• Does not fit 2024-2026 Toyota Tacoma (4th gen) - new platform uses a different center bore (95.1mm) and M14x1.5 stud thread
• Does not fit 2025-2026 Toyota 4Runner (6th gen) - new platform uses a different center bore and stud thread
• Fits 2WD and 4WD drivetrains unless otherwise noted above
• Ensure stock studs do not contact the back of the wheel when spacers are installed; trimming may be required

Features

• Forged 6061-T6 aluminum construction for superior strength-to-weight ratio
• Forged grain structure increases resistance to stress and fatigue over cast or machined grain alternatives
• Hub-centric design provides a direct extension of the axle hub for precise wheel fitment
• Grade 12.9 steel studs and lug nuts for secure, high-strength installation
• Black anodized finish for long-lasting corrosion resistance
• Adds 2 inches (50mm) of wheel offset per side for a wider, more aggressive stance
• Increases inner fender clearance to help prevent tire rub with oversized wheels and tires
• Reduces load on wheel hardware through hub-centric load distribution
• Lightweight design minimizes added rotational mass
• Backed by Borne Off-Road limited lifetime warranty against defects in materials and workmanship

Specifications

• Spacer Thickness: 2 inches (50mm)
• Bolt Pattern: 6x139.7mm (6x5.5")
• Center Bore: 106mm (hub-centric)
• Stud Thread: M12 x 1.5
• Stud Grade: 12.9 steel
• Material: Forged 6061-T6 aluminum
• Finish: Black anodized
• Position: Front and rear
• Sold as: Pair (2 spacers per kit)

Included Components

• 2x Forged 6061-T6 aluminum wheel spacers with black anodized finish
• 12x Pre-installed grade 12.9 steel wheel studs
• 12x Lug nuts

Product Description

The Borne Off-Road BNWS-004-500BK 2-Inch Wheel Spacers are designed to push each wheel outward by 50mm, giving your Toyota truck or SUV a significantly wider and more aggressive stance. Whether you need substantial clearance for oversized tires, want to eliminate fender rub at full steering lock, or are looking for a bolder appearance on the trail, these spacers deliver a dramatic offset adjustment across a wide range of Toyota and Lexus applications sharing the 6x139.7mm bolt pattern. The hub-centric design seats each spacer concentrically on the axle hub, distributing vertical loads evenly and eliminating the vibration that lug-centric spacers can introduce.

Each spacer is forged from 6061-T6 aluminum, chosen for its exceptional balance of strength and low weight. The forged grain structure makes these spacers far more resistant to stress fractures and fatigue compared to cast or billet-machined alternatives. Grade 12.9 steel studs come pre-installed in each spacer, and matching lug nuts are included for a straightforward bolt-on installation that can be completed in approximately 45 minutes with basic hand tools. The black anodized finish protects all surfaces against moisture, road salt, and trail debris over the long term.

This kit covers an extensive range of vehicles, including the 1995-2023 Toyota Tacoma (2nd and 3rd gen), 1996-2024 Toyota 4Runner, 2007-2014 FJ Cruiser, 2000-2006 Tundra, 2001-2007 Sequoia, 2003-2009 Lexus GX470, 2010-2022 Lexus GX460, and the 1996-1997 Lexus LX450 - any vehicle with a 6x139.7mm bolt pattern, 106mm center bore, and M12x1.5 stud thread. Note that the 2024+ Tacoma and 2025+ 4Runner moved to new platforms with a different center bore and stud thread, making them incompatible with this spacer. Vehicles equipped with the 8-inch BD22 differential are also excluded. Backed by Borne Off-Road's limited lifetime warranty, these spacers are built for years of reliable on- and off-road performance.