BLOX Racing BXDL-00101-BK Half Shaft Spacers Black for 2000-2009 Honda S2000 RWD

Vehicle Fitment

• 2000-2003 Honda S2000 (AP1, Base, RWD, 2.0L I4 F20C1)
• 2004-2009 Honda S2000 (AP2, Base, RWD, 2.2L I4 F22C1)

Fitment Notes

• Designed specifically for lowered Honda S2000s - recommended for vehicles lowered 1.25" (3cm) or more
• Not required on stock or mildly lowered S2000s; symptoms such as drivetrain clicking or rear-end vibration indicate need for this kit
• Fits both AP1 (2000-2003, 2.0L F20C1) and AP2 (2004-2009, 2.2L F22C1) chassis generations
• RWD only - addresses rear half shaft geometry specific to the S2000 platform

Features

• Engineered specifically for the lowered Honda S2000 to correct rear half shaft angle and eliminate driveline stress caused by suspension drop
• Corrects the altered driveshaft angle that results from lowering, reducing play between the driveshaft roller and spider gear
• Alleviates stress and wear at the CV joints and differential output shaft bearings - directly addressing the root cause of drivetrain clicking and vibration
• Eliminates or significantly reduces the prominent rear-end clicking and vibration commonly experienced on lowered S2000s
• Constructed from aluminum for a lightweight, corrosion-resistant build that withstands regular drivetrain loads
• Anodized black finish provides additional surface protection and a clean, show-quality appearance
• Includes all required mounting hardware - no additional sourcing needed for installation
• Designed and manufactured to meet or exceed ISO 9001 quality control standards

Specifications

• Part Number: BXDL-00101-BK
• Color / Finish: Black anodized
• Material: Aluminum
• Hardware: M10x1.25x40mm bolts with nuts (included)
• Recommended Use: Vehicles lowered 1.25" (3cm) or more
• Position: Rear, left and right (full set)
• Drivetrain: RWD
• Application: Vehicle-specific - 2000-2009 Honda S2000 (AP1/AP2)

Included Components

• 4x Aluminum bracket halves (2 per side, left and right)
• Hardware - M10x1.25x40mm bolts with nuts

Product Description

The BLOX Racing BXDL-00101-BK Half Shaft Spacers are a purpose-built solution for one of the most common and frustrating issues faced by lowered Honda S2000 owners: drivetrain clicking and rear-end vibration. When the S2000 is lowered, the rear suspension geometry changes and the angle of the half shafts is altered relative to their stock design parameters. This change in angle causes excessive play between the driveshaft roller and spider, placing abnormal stress on the CV joints and differential output shaft bearings. Left unaddressed, this stress accelerates wear and produces a characteristic clicking noise - often mistaken for more serious mechanical failures. The BLOX Racing half shaft spacer kit corrects this angle, relieving the stress at both the CV joints and differential output shaft bearings and restoring smooth, vibration-free drivetrain operation.

This kit is recommended for any S2000 lowered 1.25 inches or more and covers both AP1 (2000-2003, 2.0L F20C1) and AP2 (2004-2009, 2.2L F22C1) chassis generations. The spacers are machined from aluminum for a lightweight, durable construction, and the black anodized finish adds corrosion resistance along with a clean appearance that holds up under the heat and exposure conditions typical of the rear drivetrain environment. The kit arrives complete with all required hardware - four aluminum bracket halves and M10x1.25x40mm bolts with nuts - making installation straightforward without the need to source additional components. Whether the S2000 is a dedicated track build, a lowered street car, or a show vehicle, this kit provides a reliable, proven fix to a well-documented platform-specific issue.