Bilstein 41-332238 B8 8112 Front Coilover for 2022-2025 Toyota Tundra 4WD

Vehicle Fitment

• 2022-2025 Toyota Tundra (SR, SR5, Limited, Platinum, 1794 Edition, Capstone, 4WD, 3.4L V6 i-FORCE / Hybrid i-FORCE MAX)

Fitment Notes

• Front right-side coilover (passenger side) - must be paired with matching left-side unit for complete installation
• Designed for 4WD models only
• Aftermarket upper control arms are required for proper clearance and geometry correction
• Provides adjustable lift depending on configuration; alignment recommended after installation

Features

• B8 8112 Black Hawk 3-way adjustable performance coilover system
• ZoneControl® position-sensitive damping technology for improved ride control
• Independent high-speed and low-speed compression adjustment
• Remote finned aluminum reservoir for improved heat dissipation
• Large 2.65-inch aluminum shock body for increased durability and fluid capacity
• Monotube internal design for consistent damping performance
• 600 lb/in front spring rate for balanced on-road and off-road stability
• Adjustable lift capability (approximately 1-3 inches depending on setup)
• High-strength aluminum construction with corrosion-resistant finish

Specifications

• Part Number: 41-332238
• Series: Bilstein B8 8112 Black Hawk
• Position: Front Right
• Body Diameter: 2.65 in
• Piston Diameter: 60 mm
• Shaft Diameter: 22 mm
• Collapsed Length: 16.80 in
• Extended Length: 21.83 in
• Spring Rate: 600 lb/in (front)
• Reservoir: Remote, finned aluminum
• Adjustability: High-speed compression, low-speed compression, rebound tuning system

Included Components

• 1x Bilstein 41-332238 Front Right Coilover Assembly
• 1x Integrated coil spring (pre-installed)
• 1x Remote reservoir assembly
• 1x Mounting hardware set (as supplied by manufacturer)

Product Description

The Bilstein 41-332238 B8 8112 Black Hawk coilover is a high-performance front suspension component engineered for the 2022-2025 Toyota Tundra 4WD platform. Built for drivers who demand both off-road capability and on-road refinement, this coilover integrates advanced damping technology with a fully adjustable design to fine-tune ride quality and handling response.

At its core, the system features Bilstein's ZoneControl® technology, allowing independent adjustment of compression forces across different driving conditions. The remote reservoir and large aluminum shock body help maintain consistent performance under heavy load or aggressive terrain use, while reducing heat buildup during extended driving.

This coilover is ideal for lifted Tundra builds, overland setups, and performance-oriented trucks that require enhanced control and articulation. When paired with a matching left-side unit, it delivers balanced suspension geometry, improved wheel travel, and a significantly more controlled driving experience both on-road and off-road.