Baja Designs 448075 LP4 Pro LED A-Pillar Kits for 22-26 Toyota Tundra/Sequoia

Vehicle Fitment

• 2022-2026 Toyota Tundra (All Trims, 3.5L V6 Twin-Turbo, 3.4L V6 Hybrid, 4WD/RWD)
• 2023-2026 Toyota Sequoia (All Trims, 3.5L V6 Twin-Turbo Hybrid, 4WD/RWD)

Fitment Notes

• Mounts to factory A-pillar locations - no drilling, cutting, or trimming required
• Bracket design eliminates vibration on washboard roads and rough terrain
• Includes clear spot replacement lenses for optional beam pattern customization

Features

• LP4 Pro Driving/Combo beam pattern combines 42° wide and 9° spot optics for coverage across Lighting Zones 1-4
• Integrated Peripheral Technology (IPT) provides 1,700 lumens of dedicated side illumination, reducing blind spots on trails and tight turns
• Direct Ducted Cooling (DDC) actively circulates air over rear heat sinks to sustain full-power output under load
• ClearView® optics channel all light output precisely on target with minimal spill or scatter
• MoistureBlock® sealed wiring is fully waterproof, rainproof, and submersible
• CopperDrive® technology drives all LEDs at 100% rated power without thermal throttling
• uService® design allows field-replaceable lenses and optics without replacing the full housing
• IP69K and IK10 rated - engineered to withstand high-pressure wash, dust, and mechanical impact

Specifications

• Light Series: LP4 Pro
• Beam Pattern: Driving/Combo (42° Driving + 9° Spot)
• Forward Projecting Lumens (per light): 7,050 - utilizing 4 LEDs
• Forward Projecting Wattage/Amps: 60W / 6.5A
• IPT Lumens (per light): 1,700 - utilizing 4 LEDs
• IPT Wattage/Amps: 15W / 1.0A
• Backlight Wattage/Amps: 4.83W / 0.35A
• Color Temperature: 5000K Daylight
• Dimensions (per light): 5.1" H x 5.1" W x 3.2" D
• Weight (per light): 2.8 lbs
• Mating Connector: DT06-4S Deutsch
• Bezel: Billet Machined Aluminum
• Lens: Hard-Coated Clear Polycarbonate (replaceable)
• IP Rating: IP69K | Impact Rating: IK10
• Mounting Location: A-Pillar (Ditch Mount)
• LED Life Expectancy: 49,930 hours
• Warranty: Limited Lifetime

Included Components

• 2x LP4 Pro LED Lights - Clear Lens, Driving/Combo Beam
• 2x A-Pillar Mounting Brackets
• 1x Wiring Harness
• 2x Clear Spot Replacement Lens Kits
• 1x IPT Reflector Cover Kit
• 1x Hardware Kit

Product Description

The Baja Designs 448075 LP4 Pro A-Pillar Light Kit is purpose-built for the 3rd-generation Toyota Tundra (2022-2026) and Sequoia (2023-2026), delivering serious off-road illumination from the factory ditch mount location. The vibration-dampening A-pillar brackets bolt directly to OEM mounting points with zero modifications required, and the included wiring harness ensures a clean, straightforward install for any skill level.

Each LP4 Pro light produces 7,050 forward-projecting lumens in a Driving/Combo beam pattern, with an additional 1,700 lumens of Integrated Peripheral Technology (IPT) side lighting that floods blind zones standard headlights can't reach. Direct Ducted Cooling keeps LEDs running at full output even during extended use, while IP69K, IK10, MoistureBlock®, and CopperDrive® ratings ensure this kit holds up to everything the trail throws at it. Bonus clear spot replacement lenses are included, allowing users to swap beam patterns to suit their specific terrain.