AWE Tuning 3025-42906 SwitchPath Catback Exhaust 2023-2026 C8 Corvette Z06 5.5L

Vehicle Fitment

• 2023-2026 Chevrolet Corvette C8 Z06 (5.5L LT6 Flat-Plane V8; RWD)

Fitment Notes

• Fits the C8 Corvette Z06 ONLY - this system is not compatible with the C8 Corvette Stingray or E-Ray, which use a different exhaust routing and require separate AWE part numbers.
• This listing is for the Chrome Silver tip configuration (SKU: 3025-42906). The same SwitchPath™ system with Diamond Black tips is available under SKU 3025-43906.
• Retains all factory onboard drive mode controls - no valve relearn is required after installation. The system works seamlessly with the Z06's factory Performance Mode, Sport Mode, and Track Mode valve programming from day one.
• Engineered to be fully compatible with high-flow aftermarket catalysts. AWE specifically tuned the mufflers to handle the increased frequency output from high-flow cats without introducing harshness or drone.
• This product is 50-state emissions legal and does not interfere with any factory emissions equipment.
• AWE Fitment Guarantee: Engineered to fit perfectly for installation by a qualified installer. AWE No Check Engine Light Guarantee applies when installed as directed on an otherwise unmodified vehicle.

Features

• Bespoke SwitchPath™ valved catback design engineered specifically for the C8 Z06's 5.5L flat-plane V8 and unique exhaust architecture - delivers AWE's signature sound regardless of valve position, open or closed.
• Valves closed: aggressive, flat-plane character with improved note richness over stock. Valves open: viscous, high-revving fury fully uncorked - all controlled via the factory drive mode controls on the center console.
• Tailored X-pipe package delivers a clean, rich, and significantly more aggressive exhaust note compared to stock, engineered to complement the Z06's high-revving flat-plane soundtrack at every RPM.
• Tier 1 OEM-supplied valves paired with included machined aluminum brackets that retain the factory valve motors and their factory linkage - keeping electronics away from heat exposure and preventing the valve rattle that affects lower-quality systems over time.
• Two machined aluminum heat shields included, bolting onto the Z06's bumper using factory mounting points - allowing the exhaust to be visible through the bumper mesh while protecting internal bumper components from heat damage. No exhaust wraps required.
• AWE's special recipe muffler packing material ensures the exhaust tone does not degrade over time - a common issue with systems using lower-quality packing that compresses with heat cycling.
• Robust internally-lined stainless steel flex sections isolate engine movement at critical connection points, protecting weld joints and extending system life under sustained high-RPM use.
• Dyno-verified max gains of +11 hp and +14 lb-ft of torque at the wheels - performance extraction from a bolt-on, no-tune-required installation.
• 15 lb weight reduction over stock: SwitchPath™ weighs 42.5 lbs vs. factory system at 57.5 lbs - less rotating and unsprung weight for improved throttle response and handling dynamics.
• 4x 4.5" double-walled slash-cut Chrome Silver exhaust tips fill the Z06's rear bumper openings perfectly with no additional filler pieces required - a precision fit confirmed by AWE's Z06-specific engineering.
• No valve relearn required after installation - bolt it on and drive. No dealer visit needed.
• Handcrafted from 3" CNC mandrel-bent, U.S.-made .065"-wall T304L stainless steel for maximum durability, corrosion resistance, and long-term tone stability.
• Proudly designed, engineered, and manufactured in-house at AWE's Pennsylvania facility.
• AWE Lifetime Exhaust Warranty on all tubing, welding, and flex areas for the life of the original owner.

Specifications

• Brand: AWE Tuning
• Part Number: 3025-42906
• System Type: SwitchPath™ Valved Catback Exhaust
• Pipe Diameter: 3"
• Tubing Material: CNC Mandrel-Bent U.S.-Made .065"-Wall T304L Stainless Steel
• Valves: Tier 1 OEM-Supplied SwitchPath™ Valves (factory linkage compatible; no relearn required)
• X-Pipe: Tailored X-Pipe Package (Z06-specific)
• Heat Shields: 2x Machined Aluminum (bolt to factory bumper mounting locations)
• Tip Diameter: 4.5"
• Tip Finish: Chrome Silver Double-Walled Slash-Cut (AWE Logo)
• Tip Quantity: 4x
• System Weight: 42.5 lbs (vs. 57.5 lbs stock - 15 lb reduction)
• Max Power Gains: +11 hp / +14 lb-ft of torque at the wheels (dyno-verified)
• Emissions: 50-State Legal (no interference with factory emissions equipment)
• Warranty: AWE Lifetime Exhaust Warranty (tubing/welding/flex areas); 1-Year Tip Finish Warranty
• Designed, Engineered, and Manufactured in the USA (Lansdale, Pennsylvania)

Included Components

• 1x AWE SwitchPath™ Catback Exhaust System (Z06-specific, with valved mufflers and bespoke X-pipe)
• 4x 4.5" Chrome Silver Double-Walled Slash-Cut Exhaust Tips (AWE logo)
• 2x Machined Aluminum Heat Shields (factory bolt-on to bumper)
• 1x Set of Machined Aluminum Valve Motor Brackets (retains factory valve motors and linkage)
• 1x Internally-Lined Stainless Steel Flex Section Hardware
• 1x Complete Hardware Kit (all required clamps, hangers, and fasteners)
• 1x Installation Instructions

Product Description

The AWE Tuning 3025-42906 SwitchPath™ Catback Exhaust is a bespoke valved exhaust system engineered specifically for the 2023-2026 Chevrolet Corvette C8 Z06, powered by the 5.5L LT6 flat-plane V8. Unlike the AWE exhaust systems designed for the Stingray or E-Ray, this system was developed from the ground up around the Z06's unique exhaust architecture, flat-plane acoustics, and rear bumper geometry. The SwitchPath™ system delivers AWE's signature sound in both valve positions - aggressive and characterful with valves closed, and fully uncorked flat-plane fury with valves open - all operated through the Z06's factory drive mode controls without any valve relearn procedure.

The engineering behind this system addresses every weakness found in competitor products. Tier 1 OEM-supplied valves are used throughout, paired with machined aluminum brackets that retain the factory valve motors and their factory linkage - keeping sensitive electronics shielded from exhaust heat and preventing the valve rattle that plagues lower-quality installations after extended use. The tailored X-pipe package delivers a clean, rich tone across the RPM range, while AWE's special recipe muffler packing ensures the exhaust note does not degrade over time from heat cycling. Two machined aluminum heat shields bolt directly to the factory bumper mounting points, protecting the bumper internals without relying on heat wrap that can become waterlogged and damage surrounding components. At 42.5 lbs versus the factory system's 57.5 lbs, the SwitchPath™ delivers a 15-lb weight reduction - a meaningful benefit for a car where every pound counts. Dyno-verified gains reach +11 hp and +14 lb-ft of torque at the wheels.

Fabricated from 3" CNC mandrel-bent .065"-wall T304L stainless steel sourced in the USA and handcrafted in-house at AWE's Pennsylvania facility, this system is a pure bolt-on installation with no cutting, no modifications, and no dealer visit required after installation. The four 4.5" Chrome Silver double-walled slash-cut tips fill the Z06's rear bumper openings with precision - no filler pieces, no gaps. This system does not interfere with factory emissions equipment and is 50-state legal. Every AWE exhaust is backed by the AWE Lifetime Exhaust Warranty on tubing, welding, and flex areas for the life of the original owner, along with the AWE Fitment Guarantee and No Check Engine Light Guarantee. The Diamond Black tip variant of this system is available under SKU 3025-43906.