AVS 194161 In-Channel Ventvisors Window Deflectors Smoke for 09-17 Chevy Travers

Vehicle Fitment

• 2009-2012 Chevrolet Traverse (LS, LT 1LT, LT 2LT - 3.6L V6 FWD/AWD; LTZ - 3.6L V6 FWD/AWD)
• 2013-2016 Chevrolet Traverse (LS, LT 1LT, LT 2LT - 3.6L V6 FWD/AWD; LTZ - 3.6L V6 FWD/AWD)
• 2017 Chevrolet Traverse (LS Base 1SM - 3.6L V6 FWD only; LS 1LS - 3.6L V6 FWD/AWD; LT 1LT, LT 2LT - 3.6L V6 FWD/AWD; Premier - 3.6L V6 FWD/AWD)

Fitment Notes

• The 2017 LS Base (1SM) trim was available with front-wheel drive only - AWD was not offered on this specific configuration
• The LTZ trim was renamed Premier for the 2017 model year only; both are supported
• The 2013 model year received a mid-cycle facelift with a revised front fascia, redesigned rear liftgate, and Camaro-inspired taillights - window channel dimensions are unchanged and fitment is unaffected
• This part does NOT fit the redesigned 2nd generation Chevrolet Traverse (2018 and newer), which rides on a new platform with different window channel geometry
• Fits all 4-door body configurations across all supported model years
• After installation, windows must remain in the up position for a minimum of 72 hours at temperatures of 50°F or above to allow the adhesive to fully cure

Features

• In-channel mounting design installs flush inside the window frame for a factory-integrated, low-profile appearance with no exterior tape touching the painted body
• Keeps rain, sleet, wind, and road debris out of the interior while allowing windows to remain cracked for continuous fresh air circulation
• Reduces interior heat buildup when parked with windows cracked, keeping the cabin cooler without running the A/C
• Minimizes interior wind noise and mirror fogging at highway speeds for a quieter, more comfortable drive
• Eliminates stale odors from pets, smoke, food, and athletic gear through passive airflow while driving or parked
• Constructed from high-grade, impact-modified acrylic - strong, flexible, scratch resistant, and car-wash safe
• UV-resistant dark smoke finish retains its color and will not fade, yellow, or discolor from prolonged sun exposure
• No drilling, no exterior tape on painted surfaces, and no special hardware required - secures with pre-applied 3M automotive-grade adhesive inside the window channel
• Greater side-mirror visibility than clip-on or outside-mount style deflectors - no obstructing "leg" in the mirror sightline
• Backed by AVS's Limited Lifetime Warranty and made in the USA with global materials

Specifications

• Part Number: 194161
• Brand: Auto Ventshade (AVS)
• Finish: Dark Smoke
• Material: High-grade impact-modified UV-resistant acrylic
• Mount Type: In-Channel (inside window channel / rubber seal)
• Position: Front Left, Front Right, Rear Left, Rear Right
• Adhesive: Pre-applied 3M automotive-grade double-sided adhesive tape
• Item Length: 46.88 inches (longest piece)
• Quantity: 4-piece set
• UPC: 725478156645

Included Components

• 2x Front In-Channel Window Deflectors (Driver & Passenger)
• 2x Rear In-Channel Window Deflectors (Driver & Passenger)
• 1x Surface Prep Kit
• 1x Installation Guide

Product Description

The AVS 194161 In-Channel Ventvisor is a precision-engineered, 4-piece side window deflector set designed exclusively for the 1st generation Chevrolet Traverse (2009-2017). Custom molded to match the exact window channel geometry of the Traverse's 4-door body, these ventvisors install flush inside the door frame with no tape contacting the vehicle's painted exterior and no drilling required. The result is a clean, factory-integrated appearance that complements the Traverse's profile across every trim level - from the family-hauling LS and LT to the fully equipped LTZ and the renamed 2017 Premier - while delivering practical all-weather protection on every drive.

Each deflector is built from thick, impact-modified acrylic that holds its shape through temperature extremes and daily use. The dark smoke tint is UV-stabilized to resist fading, yellowing, and discoloration over time, and the surface is scratch resistant and car-wash safe. Installation is entirely tool-free: each piece slides into the window channel and bonds to the rubber seal using the factory-applied 3M automotive-grade adhesive, keeping all exterior painted surfaces tape-free. For best adhesion, windows should remain in the up position for a minimum of 72 hours at 50°F or warmer after installation.

This part covers the full 2009-2017 production run of the 1st generation Traverse, including all pre-facelift (2009-2012) and post-facelift (2013-2017) models across all available trim configurations. It fits both FWD and AWD drivetrain variants - the only exception being the 2017 LS Base (1SM), which was offered exclusively in front-wheel drive. Note that this part is designed specifically for the 1st generation Traverse and does not fit the completely redesigned 2nd generation model introduced for the 2018 model year. Backed by AVS's Limited Lifetime Warranty, the 194161 is one of the most popular in-channel ventvisor options available for the 1st gen Traverse platform.