AVS 194964 In-Channel Ventvisor Rain Guards for 2008-2012 Jeep Liberty 3.7L V6

Vehicle Fitment

• 2008-2012 Jeep Liberty (KK, Sport, 3.7L V6, 2WD/4WD)
• 2008-2012 Jeep Liberty (KK, Limited, 3.7L V6, 2WD/4WD)
• 2011-2012 Jeep Liberty (KK, Limited Jet Edition, 3.7L V6, 2WD/4WD)

Fitment Notes

• Fits the 2nd-generation Jeep Liberty (KK platform) ONLY - does NOT fit the 1st-generation Liberty (KJ, 2002-2007), which uses a different body and window channel design
• The 3.7L V6 was the only engine offered for the KK Liberty in the North American market; no I4 or diesel variants were available for 2008-2012 North American models
• Fits both 2WD and 4WD drivetrain configurations (Command-Trac II and Selec-Trac II)
• After installation, windows must remain fully closed (up position) for 72 hours to allow the 3M adhesive to fully cure and bond securely within the window channel

Features

• In-channel mount design installs completely inside the window channel for a flush, factory-integrated appearance with no visible exterior tape, overhang, or hardware
• No drilling required - patented snap-in design secures directly into the door's window channel or along the rubber seal without special tools or permanent modifications to the vehicle
• Pre-applied 3M automotive-grade adhesive tape bonds each visor firmly inside the channel; no adhesive contacts the vehicle's painted exterior surfaces at any point
• Allows windows to be partially opened during rain or inclement weather, keeping the interior dry while enabling continuous fresh air circulation through the cabin
• Reduces interior cabin heat buildup when parked by allowing safe partial-window ventilation even in light precipitation
• Minimizes wind buffeting noise and interior window fogging when windows are cracked at highway or city driving speeds
• Dark smoke UV-resistant finish engineered to resist fading, yellowing, and surface degradation from prolonged sun exposure
• High-grade impact-modified acrylic construction is flexible yet strong, car-wash safe, and resistant to warping or cracking under normal driving conditions
• Precision-engineered to match the exact window channel dimensions and door contours of the 2008-2012 Jeep Liberty KK platform
• Backed by AVS's Limited Lifetime Warranty against manufacturing and material defects; invented, engineered, and manufactured in the USA with global materials

Specifications

• Part Number: 194964
• Brand: Auto Ventshade (AVS)
• Product Line: In-Channel Ventvisor
• Mount Type: In-Channel (snap-in, no-drill)
• Position: Front Left, Front Right, Rear Left, Rear Right
• Material: High-grade UV-resistant impact-modified acrylic
• Finish / Color: Dark Smoke
• Quantity: 4-piece set (all four doors)
• Adhesive: Pre-applied 3M automotive-grade tape (factory-applied to each deflector)
• Engine Coverage: 3.7L V6 (only engine available for 2008-2012 Liberty KK in North America)
• Drivetrain Coverage: 2WD and 4WD
• Warranty: Limited Lifetime
• Country of Manufacture: Made in the USA with global materials

Included Components

• 2x Front In-Channel Ventvisor deflectors (driver side and passenger side)
• 2x Rear In-Channel Ventvisor deflectors (driver side and passenger side)
• 1x Pre-applied 3M automotive-grade adhesive (factory-applied to each deflector)
• 1x Installation instruction sheet

Product Description

The Auto Ventshade (AVS) 194964 In-Channel Ventvisor is a precision-engineered, 4-piece side window deflector set custom-designed for the 2008-2012 Jeep Liberty (2nd generation, KK platform). This set covers all North American KK Liberty trims - Sport, Limited, and Limited Jet Edition - across both 2WD and 4WD drivetrain configurations. The 3.7L V6 was the sole engine offered for the KK Liberty in the North American market, and the window channel fitment applies uniformly across the entire lineup. The in-channel mount design seats completely inside the door's window channel for a clean, streamlined appearance with no exterior tape marks, no visible hardware, and no profile overhang - ideal for Liberty owners who want weather protection without altering the vehicle's rugged, purposeful aesthetic.

Installation is tool-free and requires no drilling or modification to the vehicle. Each deflector is pre-loaded with 3M automotive-grade adhesive and snaps directly into the window channel or along the rubber door seal. After installation, the windows must remain fully closed for 72 hours to allow the adhesive to achieve a full, secure bond. Once cured, all four windows can be cracked open during rain, snow, or dusty trail conditions - keeping the interior fresh and properly ventilated without allowing weather intrusion, interior fogging, or excessive wind noise. This makes the 194964 particularly useful for Liberty owners who spend time off-road or outdoors, where the ability to vent the cabin without opening windows fully is a practical day-to-day advantage.

Built from high-grade impact-modified acrylic in a dark smoke finish, the AVS 194964 Ventvisors are UV-resistant, scratch-resistant, and car-wash safe - engineered to maintain their color, shape, and fit through years of exposure. Important: this product is designed specifically for the KK-generation Liberty (2008-2012) and does not fit the first-generation Liberty (KJ, 2002-2007), which has a different body structure and window channel geometry. Every set is backed by AVS's Limited Lifetime Warranty against manufacturing and material defects, making the 194964 a dependable long-term upgrade for any 2008-2012 Jeep Liberty owner.