AVS 194415 In-Channel Ventvisor Deflectors for 2007-2014 Cadillac Escalade 6.2L

Vehicle Fitment

• 2007-2014 Cadillac Escalade (Base, Luxury, Premium, Platinum - 6.2L V8, RWD)
• 2007-2014 Cadillac Escalade (Base, Luxury, Premium, Platinum - 6.2L V8, AWD)

Fitment Notes

• Fits the standard short-wheelbase Cadillac Escalade (GMT900 platform, 2007-2014) only - all non-hybrid trim levels are supported in both RWD and AWD configurations
• Does NOT fit the Cadillac Escalade ESV (extended-length model) - the ESV has a longer rear door and different window channel geometry requiring a separate part
• Does NOT fit the Cadillac Escalade EXT (pickup truck / crew cab body style) - the EXT uses an entirely different body and window configuration
• Does NOT fit the Cadillac Escalade Hybrid (2009-2013) - the Hybrid uses a different 6.0L powertrain configuration; fitment for the Hybrid has not been confirmed by AVS
• Does NOT fit the fourth-generation Cadillac Escalade (2015-present), which uses a new platform and body style
• A trial fit is recommended prior to final installation to ensure proper positioning within the window channel
• After installation, windows must remain in the up/closed position for a minimum of 72 hours to allow the adhesive to fully cure and bond

Features

• In-channel mount design installs seamlessly inside the window channel for a sleek, low-profile appearance with no exterior tape visible on the vehicle body
• Allows windows to be cracked open in rain, wind, or inclement weather while keeping water, road debris, and insects outside the cabin
• Continuously circulates fresh air through the three-row cabin to eliminate stale odors from pets, smoke, spills, and athletic gear
• Constructed from impact-modified, UV-resistant acrylic material that resists scratches, chips, and discoloration from prolonged sun exposure
• Attractive dark smoke finish complements the Escalade's factory exterior lines and chrome trim across all supported trim levels
• Car wash safe - the secure in-channel fit prevents deflectors from shifting or detaching during automated and hand washing
• No drilling, cutting, or special hardware required - complete no-drill installation using included 3M automotive-grade adhesive tape
• Custom-engineered to match the exact window channel contours of the 2007-2014 Cadillac Escalade standard-wheelbase body for a precision factory-quality fit
• Reduces interior wind noise and sun glare when windows are cracked at highway speeds
• Helps reduce interior cabin heat build-up when parked by allowing ventilation with windows partially open
• Backed by AVS's Limited Lifetime Warranty against defects in materials and workmanship for the original vehicle owner
• Made in the USA with global materials at AVS's Georgia manufacturing facility

Specifications

• Part Number: 194415
• Brand: Auto Ventshade (AVS)
• Product Line: In-Channel Ventvisor
• Color/Finish: Smoke (dark tinted acrylic)
• Material: Impact-modified UV-resistant acrylic
• Position: Front left, front right, rear left, rear right (all four door windows)
• Installation Method: In-channel, adhesive-mount using included 3M automotive-grade double-sided tape
• Drilling Required: No
• Vehicle Fitment: 2007-2014 Cadillac Escalade (Standard/Short-Wheelbase Model Only)
• Engine: 6.2L V8 (single engine across all supported model years and trims)
• Drivetrain: RWD or AWD
• Warranty: Limited Lifetime (original retail purchaser, original vehicle only; non-transferable)
• Country of Manufacture: USA (with global materials)

Included Components

• 2x Front In-Channel Ventvisor Deflectors (driver and passenger side)
• 2x Rear In-Channel Ventvisor Deflectors (driver and passenger side)
• 1x 3M Automotive-Grade Adhesive Tape (pre-applied or included prep strips)
• 1x Vehicle-Specific Installation Instructions / Prep Kit

Product Description

The AVS 194415 In-Channel Ventvisor Deflectors are precision-engineered for the third-generation Cadillac Escalade (2007-2014) in standard short-wheelbase form, delivering a custom-fit ventilation and weather protection solution that matches the Escalade's premium styling. Unlike clip-on or tape-over-door-frame visors, these deflectors mount directly inside the window channel for a factory-installed appearance with no exterior tape visible on the vehicle body. The dark smoke acrylic finish complements the Escalade's bold exterior lines and chrome accents without obstructing the window trim - a clean, upscale look well-suited to the Base, Luxury, Premium, and Platinum trims across all eight model years of this generation.

Installation is straightforward and requires no drilling, cutting, or professional tools. The deflectors secure inside the window channels using included 3M automotive-grade double-sided adhesive tape. A trial fit is recommended before final installation, and windows should remain closed for a minimum of 72 hours post-installation to allow full adhesive cure. Once secure, the deflectors allow you to crack all four windows in any weather condition, circulating fresh air through the three-row cabin while blocking rain, road spray, insects, and wind-driven debris. This is particularly beneficial when parked in warm conditions or when cabin ventilation is needed without running climate control.

Buyers must verify their Escalade is the standard short-wheelbase model, as this part is not compatible with the extended-length ESV or the EXT pickup truck body style - both require a different deflector part due to their unique window channel geometries. This set is also confirmed for RWD and AWD gasoline-powered Escalade configurations only, covering all model years from 2007 through 2014 before the fourth-generation redesign for 2015. The single 6.2L V8 used across all supported years means there is no engine-specific fitment concern - all standard Escalades in this generation use the same body and window channel design. AVS backs this set with a Limited Lifetime Warranty against manufacturing and material defects, valid for the original retail purchaser on the original vehicle of installation.