AVS 194056 In-Channel Ventvisor 4-Piece Smoke 2005-2015 Toyota Tacoma Double Cab

Vehicle Fitment

• 2005 Toyota Tacoma - Double Cab (all trims: PreRunner, SR5, TRD Sport, TRD Off-Road, Limited; 2WD and 4WD)
• 2006 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2007 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2008 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2009 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2010 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2011 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2012 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2013 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2014 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)
• 2015 Toyota Tacoma - Double Cab (all trims; 2WD and 4WD)

Fitment Notes

• Double Cab ONLY - Does NOT fit the Access Cab (Extended Cab): The 2005-2015 Tacoma Access Cab has a smaller rear quarter window with a different channel geometry; the correct part for the Access Cab is AVS 192706 (2-piece set). Confirm your cab style before ordering
• Does NOT fit the 2016-2023 Tacoma - the second-generation Tacoma (2016+) was redesigned with different body and window channel dimensions; the correct part for the 2016-2023 Tacoma Double Cab is AVS 194768
• Does NOT fit Regular Cab (Standard Cab) configurations - Regular Cab models have only two doors and do not use a 4-piece window visor set
• This is an in-channel mounting design - the visors seat within the existing window rubber channel and are secured with included 3M automotive-grade adhesive; no exterior tape contacts the vehicle's painted surface
• 4-piece set covers all four door windows: driver front, passenger front, driver rear, passenger rear
• Compatible with all engine options (2.7L I4 and 4.0L V6) and all transmission types - engine and transmission do not affect window channel fitment
• No drilling, no cutting, and no special tools required for installation
• For best adhesion, install in temperatures of 50°F (10°C) or higher; leave windows in the up position for a minimum of 72 hours after installation to allow the adhesive to fully cure before operating the windows

Features

• In-channel mounting design - visors slide into the existing door window channel and are held within the rubber weatherstripping with 3M automotive-grade adhesive; the exterior of the vehicle's painted surface is never contacted by tape, eliminating any risk of paint damage, adhesive residue, or lifting
• Allows windows to be cracked open in rain and inclement weather - the deflector redirects airflow and channels water away from the window opening, allowing fresh air to circulate inside the cab without admitting rain, road spray, or debris
• Reduces interior heat buildup - cracking the windows with visors installed allows trapped hot air to escape on warm days without admitting rain, reducing cabin temperatures and lowering the demand on the air conditioning system
• Reduces wind buffeting and wind noise - the deflector channels airflow away from the window opening when the window is partially lowered, significantly reducing the resonance and buffeting noise that typically occurs at highway speeds with an open window
• Improves side mirror and window visibility in wet weather - channels water away from the window glass and side mirror area, reducing water sheeting on the side windows and helping maintain clearer rearward visibility during rain
• Sweeps away interior odors - with windows cracked, stale air, pet odors, smoke, and other cabin odors are continuously ventilated out of the cab without admitting weather
• Molded from durable, impact-modified acrylic - scratch resistant, UV resistant, and car-wash safe (avoid brush-style automatic car washes); will not fade, warp, crack, or discolor from prolonged UV exposure or weather
• Dark smoke finish - a tinted, semi-transparent dark tone that integrates naturally with the Tacoma's window glass and complements all factory exterior colors without appearing visually disruptive
• Low-profile aerodynamic design - the in-channel mounting produces a lower, more integrated profile compared to outside-mount (tape-on) deflectors, blending cleanly with the vehicle's body lines
• Pre-applied 3M automotive-grade adhesive included - the same type of adhesive tape used by vehicle manufacturers to attach OEM trim components at the factory; no additional adhesive products required
• Made in the USA by Auto Ventshade - AVS has been manufacturing automotive window accessories since 1935; backed by a Limited Lifetime Warranty against defects in materials and workmanship

Specifications

• Part Number: 194056
• Brand: Auto Ventshade (AVS)
• Product Line: In-Channel Ventvisor
• Mounting Style: In-Channel (no exterior tape contacts vehicle paint)
• Finish: Dark Smoke
• Material: UV-resistant, impact-modified acrylic
• Pieces: 4 (driver front, passenger front, driver rear, passenger rear)
• Fitment: Custom-fit for 2005-2015 Toyota Tacoma Double Cab ONLY
• Installation: No-drill; seats into existing window channel using included 3M adhesive
• Car Wash Safe: Yes (touchless/high-pressure; avoid brush-style automatic washes)
• Country of Manufacture: USA (with global materials)
• Warranty: Limited Lifetime Warranty against defects in materials and workmanship

Included Components

• 4x In-Channel Ventvisor Deflectors (dark smoke acrylic) - driver front, passenger front, driver rear, passenger rear
• Pre-applied 3M automotive-grade adhesive tape (on visors)
• Installation instructions

Product Description

The Auto Ventshade 194056 is a 4-piece set of In-Channel Ventvisor window deflectors custom-engineered for the 2005-2015 Toyota Tacoma Double Cab. This is the first-generation second-body-style Tacoma (the platform introduced for 2005 and carried through the 2015 model year), and this part number fits all Double Cab configurations of that generation across all trims, drive systems, and engine choices - but it does not fit the Access Cab, which uses a separate 2-piece part (AVS 192706) due to its different rear quarter window design, and it does not fit the 2016+ Tacoma, which underwent a full body redesign.

The in-channel mounting design is the defining feature that sets this Ventvisor apart from traditional tape-on outside-mount deflectors. Rather than adhering to the vehicle's exterior painted surface, these visors slide into and lock within the existing window rubber channel - the same channel the window glass travels in. The included 3M automotive-grade adhesive secures the visor within the channel without any tape ever touching the truck's paint, eliminating the risk of adhesive residue, paint lifting, or discoloration that can occur with exterior-mount deflectors over time. The result is a lower, cleaner profile that sits flush with the door's window line and reads as more integrated and factory-style than outside-mount alternatives.

Functionally, the 194056 delivers the core benefits Tacoma owners most value from window deflectors: the ability to crack windows on rainy drives without admitting moisture into the cab, meaningfully reduced cabin heat buildup by allowing hot air to escape without requiring the windows to be fully closed, and substantially reduced wind buffeting and highway wind noise when windows are partially open. The dark smoke acrylic is UV resistant, scratch resistant, and car-wash safe - designed to hold its finish, shape, and channel grip for the life of the vehicle without fading or warping. Backed by AVS's Limited Lifetime Warranty and made in the USA.