AVS 194459 In-Channel Ventvisor Smoke Deflectors for 2002-2006 Honda CR-V 2.4L

Vehicle Fitment

• 2002-2004 Honda CR-V (LX - 2.4L I4, FWD, 5-speed Manual or 4-speed Automatic)
• 2002-2004 Honda CR-V (LX, EX - 2.4L I4, AWD, 5-speed Manual or 4-speed Automatic)
• 2005-2006 Honda CR-V (LX - 2.4L I4, FWD, 5-speed Manual or 5-speed Automatic)
• 2005-2006 Honda CR-V (LX, EX, SE - 2.4L I4, AWD, 5-speed Manual or 5-speed Automatic)

Fitment Notes

• Fits the second-generation Honda CR-V (RD4/RD5 platform) sold in the U.S. from 2002 through 2006, across all trim levels and both drivetrain configurations
• The SE trim was introduced as a new trim level for 2005 and was offered in AWD only
• The EX trim was available in AWD only throughout the 2002-2006 model years in the U.S. market; FWD was exclusive to the LX trim
• For 2005-2006, the 4-speed automatic was replaced by a 5-speed automatic transmission - both variants share the same window channel design and are fully compatible
• A single 2.4L I4 K24A1 engine was used across all trim levels and model years - there are no engine-specific fitment concerns for this part
• Does NOT fit the first-generation Honda CR-V (1997-2001) or the third-generation CR-V (2007-2011), which use different body and window channel designs

Features

• In-channel mount design installs seamlessly inside the window channel for a sleek, low-profile appearance with no exterior tape visible on the vehicle body
• Allows windows to be cracked open in rain, wind, or inclement weather while keeping water, road debris, and insects outside the cabin
• Continuously circulates fresh air through the cabin to eliminate stale odors from pets, smoke, spills, and everyday use
• Constructed from impact-modified, UV-resistant acrylic material that resists scratches, chips, and discoloration from prolonged sun exposure
• Attractive dark smoke finish integrates naturally with the CR-V's factory exterior lines across all trim levels without covering chrome window moldings
• Car wash safe - the secure in-channel fit prevents deflectors from shifting or detaching during automated and hand washing
• No drilling, cutting, or special hardware required - complete no-drill installation using included 3M automotive-grade adhesive tape
• Custom-engineered to match the exact window channel contours of the 2002-2006 Honda CR-V for a precision factory-quality fit
• Reduces interior wind noise and sun glare when windows are cracked at highway speeds
• Helps reduce interior cabin heat build-up when parked by allowing ventilation with windows partially open
• Backed by AVS's Limited Lifetime Warranty against defects in materials and workmanship for the original vehicle owner
• Made in the USA with global materials at AVS's Georgia manufacturing facility

Specifications

• Part Number: 194459
• Brand: Auto Ventshade (AVS)
• Product Line: In-Channel Ventvisor
• Color/Finish: Smoke (dark tinted acrylic)
• Material: Impact-modified UV-resistant acrylic
• Position: Front left, front right, rear left, rear right (all four door windows)
• Installation Method: In-channel, snap-in with included 3M automotive-grade double-sided adhesive tape
• Drilling Required: No
• Engine: 2.4L I4 K24A1 (single engine across all supported years and trims)
• Vehicle Fitment: 2002-2006 Honda CR-V (all trims - LX, EX, SE; FWD & AWD)
• Warranty: Limited Lifetime (original retail purchaser, original vehicle only; non-transferable)
• Country of Manufacture: USA (with global materials)

Included Components

• 2x Front In-Channel Ventvisor Deflectors (driver and passenger side)
• 2x Rear In-Channel Ventvisor Deflectors (driver and passenger side)
• 1x 3M Automotive-Grade Adhesive Tape (pre-applied or included prep strips)
• 1x Installation Instructions / Prep Kit

Product Description

The AVS 194459 In-Channel Ventvisor Deflectors are precision-engineered to fit all trim levels of the second-generation Honda CR-V (2002-2006), delivering a clean, custom-fit ventilation and weather protection solution for one of the most popular compact SUVs of the era. Unlike clip-on or tape-over-door-frame visors, these deflectors mount directly inside the window channel for a factory-flush appearance with no exterior tape visible on the vehicle body. The dark smoke acrylic finish complements the CR-V's factory exterior styling across the LX, EX, and SE trims - in both FWD and AWD configurations - without obstructing chrome trim or requiring any modification to the vehicle.

Installation requires no drilling, cutting, or professional tools. The deflectors snap firmly into the window channels and bond securely using the included 3M automotive-grade double-sided adhesive tape. Once installed, they allow you to crack all four windows in any weather condition - whether navigating rainy Pacific Northwest roads or sitting in summer heat - letting fresh air circulate through the cabin while blocking rain, road spray, insects, and wind-driven debris. The second-generation CR-V's single 2.4L K24A1 i-VTEC engine was used across the entire 2002-2006 lineup with no powertrain variations that would affect window channel compatibility, making this a universal fit for the generation regardless of transmission or drivetrain choice.

The mild refresh introduced for 2005 - including the new SE trim and upgraded 5-speed automatic transmission - did not alter the CR-V's door or window channel design, so this set fits all six model years of the second generation equally. Buyers should note that this part is specific to the 2002-2006 CR-V and is not compatible with the first-generation (1997-2001) or third-generation (2007-2011) models. Built from impact-modified, UV-stable acrylic, these deflectors are engineered to maintain their smoke finish and structural integrity for years of daily use. AVS backs this set with a Limited Lifetime Warranty against manufacturing and material defects, valid for the original retail purchaser on the original vehicle of installation.