AVS 194235 In-Channel Ventvisors Window Deflectors 4pc for 01-07 Toyota Sequoia

Vehicle Fitment

• 2001-2004 Toyota Sequoia (SR5, Limited - 4.7L V8 240 hp - 4-speed automatic - 2WD/4WD)
• 2005 Toyota Sequoia (SR5, Limited - 4.7L V8 VVT-i 282 hp - 5-speed automatic - 2WD/4WD)
• 2006-2007 Toyota Sequoia (SR5, Limited - 4.7L V8 VVT-i 273 hp - 5-speed automatic - 2WD/4WD)

Fitment Notes

• The 1st generation Toyota Sequoia was offered in two trim levels throughout its entire production run - SR5 (entry level) and Limited (top level) - in both 2WD (RWD) and 4WD configurations
• The 2005 model year introduced Toyota's VVT-i variable valve timing technology and upgraded the automatic transmission from 4-speed to 5-speed; the 2006-2007 power rating of 273 hp reflects an updated SAE measurement methodology - the engine itself is mechanically equivalent to the 2005 unit
• This part does NOT fit the 2nd generation Toyota Sequoia (2008 and newer), which was completely redesigned on a new platform with different door and window channel geometry
• Side curtain and side torso airbags became standard on all 2007 model year Sequoias; they were optional on 2002-2006 models
• Fits all 4-door body configurations across all supported model years
• After installation, windows must remain in the up position for a minimum of 72 hours at temperatures of 50°F or above to allow the adhesive to fully cure

Features

• In-channel mounting design installs flush inside the window frame for a factory-integrated, low-profile appearance with no exterior tape touching the painted body
• Keeps rain, sleet, wind, and road debris out of the interior while allowing windows to remain cracked for continuous fresh air circulation
• Reduces interior heat buildup when parked with windows cracked, keeping the cabin cooler without running the A/C
• Minimizes interior wind noise and mirror fogging at highway speeds for a quieter, more comfortable ride
• Eliminates stale odors from pets, smoke, food, and athletic gear through passive airflow while driving or parked
• Constructed from high-grade, impact-modified acrylic - strong, flexible, scratch resistant, and car-wash safe
• UV-resistant dark smoke finish retains its color and will not fade, yellow, or discolor from prolonged sun exposure
• No drilling, no exterior tape on painted surfaces, and no special hardware required - secures with pre-applied 3M automotive-grade adhesive inside the window channel
• Greater side-mirror visibility than clip-on or outside-mount style deflectors - no obstructing "leg" in the mirror sightline
• Backed by AVS's Limited Lifetime Warranty and made in the USA with global materials

Specifications

• Part Number: 194235
• Brand: Auto Ventshade (AVS)
• Finish: Dark Smoke
• Material: High-grade impact-modified UV-resistant acrylic
• Mount Type: In-Channel (inside window channel / rubber seal)
• Position: Front Left, Front Right, Rear Left, Rear Right
• Adhesive: Pre-applied 3M automotive-grade double-sided adhesive tape
• Quantity: 4-piece set
• UPC: 725478070125

Included Components

• 2x Front In-Channel Window Deflectors (Driver & Passenger)
• 2x Rear In-Channel Window Deflectors (Driver & Passenger)
• 1x Surface Prep Kit
• 1x Installation Guide

Product Description

The AVS 194235 In-Channel Ventvisor is a precision-engineered, 4-piece side window deflector set designed exclusively for the 1st generation Toyota Sequoia (2001-2007). Custom molded to match the exact window channel geometry of the XK30/XK40 platform Sequoia's 4-door body, these ventvisors install flush inside the door frame with no tape contacting the vehicle's painted exterior and no drilling required. The result is a clean, factory-integrated look that complements the Sequoia's bold full-size SUV profile - on both the entry-level SR5 and the top-tier Limited - while providing practical all-weather protection on every drive, whether in 2WD or 4WD configuration.

Each deflector is built from thick, impact-modified acrylic that holds its shape through temperature extremes and years of daily use. The dark smoke tint is UV-stabilized to resist fading, yellowing, and discoloration over time, and the surface is scratch resistant and car-wash safe. Installation is entirely tool-free: each piece slides into the window channel and bonds to the rubber seal using the factory-applied 3M automotive-grade adhesive, keeping all exterior painted surfaces tape-free. After installation, windows should remain in the up position for a minimum of 72 hours at 50°F or warmer to achieve a firm, long-lasting hold.

The AVS 194235 covers the complete production run of the 1st generation Toyota Sequoia from 2001 through 2007. The single powertrain throughout - a 4.7L V8 mated to a 4-speed automatic (2001-2004) or 5-speed automatic (2005-2007) - is fully supported in both 2WD and 4WD guise. Note that this part is specifically designed for the 1st generation Sequoia and does not fit the redesigned 2nd generation model (2008 and newer), which uses a completely new platform with different window channel dimensions. Backed by AVS's Limited Lifetime Warranty, the 194235 is the go-to in-channel ventvisor solution for 1st generation Sequoia owners looking to upgrade comfort, style, and all-weather protection in a single, easy installation.