ARP 100-7737 M14x1.50 Wheel Stud Kit 1 in. Over Stock for 2010-2024 Chevy Camaro

Vehicle Fitment

• 2010-2015 Chevrolet Camaro (LS, LT, RS, SS, SS 1LE, Z/28, ZL1 - 3.6L V6, 6.2L V8, 7.0L V8, RWD)
• 2016-2024 Chevrolet Camaro (LS, LT, LT1, RS, SS, SS 1LE, ZL1, ZL1 1LE - 2.0L I4, 3.6L V6, 6.2L V8, RWD)

Fitment Notes

• Fits front and rear hubs on all 5th Gen (2010-2015) and 6th Gen (2016-2024) Camaro models
• Studs are 1.000 in. longer than stock - verify wheel hub offset and spacer clearance before installing
• Press-in installation; hub bore hole must fall within correct knurl diameter tolerance - 0.006-0.016 in. smaller for steel/cast iron hubs, 0.010-0.016 in. smaller for aluminum hubs
• Each hub hole must be chamfered 0.025 in. to clear the underhead radius and prevent stud failure
• Sold as a set of 5 studs - one per-corner purchase covers a single axle end

Features

• Made from heat-treated 8740 chromoly steel, rated at 190,000 psi tensile strength - far stronger than OEM wheel studs
• 1.000 in. over stock length provides additional thread engagement for wheel spacers, aftermarket wheels, or track use
• Cadmium-plated gold finish for enhanced corrosion resistance and long-term durability
• Quick-start nose design helps prevent cross-threading during lug nut installation
• Press-in installation - no drilling required, direct replacement for factory studs
• Engineered to handle the high shear and lateral forces generated in performance and racing applications
• Compatible with all 5th and 6th Gen Camaro trims including ZL1, Z/28, and 1LE track variants

Specifications

• Part Number: 100-7737
• Material: 8740 Chromoly Steel
• Tensile Strength: 190,000 psi
• Thread Size: M14 x 1.50 RH
• Underhead Length (UHL): 3.192 in. (81.08 mm)
• Knurl Diameter: 0.625 in. (15.88 mm)
• Knurl Length: 0.341 in. (8.66 mm)
• Nose Length: 0.435 in.
• Style: Press-In
• Finish: Cadmium Plated (Gold)
• Quantity: Set of 5

Included Components

• 5x ARP M14 x 1.50 Chromoly Press-In Wheel Studs
• Note: Lug nuts not included

Product Description

The ARP 100-7737 is a set of five press-in wheel studs engineered specifically for the 2010-2024 Chevrolet Camaro. At 1.000 in. longer than the factory studs, this kit provides the extra thread engagement needed for wheel spacers, thick-centered aftermarket wheels, and track setups where proper lug nut seating depth is critical. Made from heat-treated 8740 chromoly steel rated at 190,000 psi, these studs are substantially stronger than OEM hardware and are built to withstand the shear forces and lateral loads generated under hard acceleration, braking, and cornering.

Installation is a direct press-in fit with no drilling required - the same process used to replace factory studs. The quick-start nose design minimizes the risk of cross-threading during lug nut installation, and the cadmium-plated finish protects against corrosion for long-term reliability. Compatible with all 5th Gen (2010-2015) and 6th Gen (2016-2024) Camaro trims across both coupe and convertible body styles, including the high-performance SS 1LE, Z/28, ZL1, and ZL1 1LE variants.