Air Lift 76015 Perf. Front Air Suspension Kit for 2005-2014 Ford Mustang S197

Vehicle Fitment

• 2005-2014 Ford Mustang Base (S197)
• 2005-2014 Ford Mustang GT (S197)
• 2005-2014 Ford Mustang Convertible (S197)
• 2005-2014 Ford Mustang Shelby GT500 (S197)

Fitment Notes

• Front kit only - covers front struts and air springs exclusively; companion rear kit is PN 76515
• No chassis modifications required for front kit installation - direct bolt-on fitment
• 3/8" air fittings are NOT included and must be purchased separately; kit includes 1/4" FNPT x 1/4" PTC and 1/4" FNPT x 3/8" PTC fittings
• Designed for use with Air Lift Performance 3P (pressure-based) or 3H (height and pressure) air management systems - management system sold separately
• Compatible with Air Lift Performance 1/4" or 3/8" air line; 1/4" is recommended for smoother, more precise height adjustment and easier routing
• Front drop of up to 4.75 inches (120mm) from stock ride height

Features

• Progressive-rate double-bellows air springs mounted over high-performance monotube struts deliver a combination of aggressive drop, superior ride quality, and precise load response not achievable with static coilovers
• 32 levels of damping adjustability allow independent tuning of compression and rebound - dial in a plush daily driver setting or a firm track-focused setup with a single click per corner
• Adjustable camber plates integrated into the upper mounts allow precise camber correction for aggressive wheel fitment or track alignment without additional hardware
• High-quality spherical monoball bearings in the upper end cap deliver instant damper response, precise steering feel, and eliminate the compliance-induced vagueness of rubber upper mounts
• Threaded lower mounts provide independent ride height adjustment at each corner for a perfectly level stance regardless of wheel offset or load
• Sway bar end links included to restore proper front sway bar geometry after lowering, reducing body roll and improving corner-entry stability
• Allows the vehicle to air out to 4.75 inches (120mm) below stock ride height at the front - achieving show-quality stance while maintaining full daily drivability when aired up
• Black-chromed steel shock bodies and red anodized aluminum accents deliver a premium show finish under the hood and in the wheel well
• Braided stainless steel leader hoses included for a clean, corrosion-resistant air connection between the struts and the management system
• Validated on racetracks and road courses worldwide for ride and handling capability that meets or exceeds factory S197 suspension dynamics
• Backed by Air Lift Performance's 1-year unlimited mileage warranty

Specifications

• Position: Front axle (left and right struts)
• Strut Type: Monotube, threaded body
• Air Spring Type: Progressive-rate double-bellows (2B6)
• Damping Adjustment: 32 levels (external knob adjustment)
• Maximum Front Drop: 4.75 in. (120mm) from stock ride height
• Upper Mount: Adjustable camber plate with spherical monoball bearing
• Lower Mount: Threaded, black anodized aluminum
• Shock Body Finish: Black-chromed steel
• Leader Hose: Braided stainless steel
• Fitting Size Included: 1/4" FNPT x 1/4" PTC and 1/4" FNPT x 3/8" PTC
• Modifications Required: None
• Compatible Air Management: Air Lift Performance 3P or 3H
• Compatible Air Line: 1/4" or 3/8" (1/4" recommended)
• Warranty: 1-year unlimited mileage

Included Components

• 2x Front monotube air struts with progressive-rate double-bellows air springs pre-installed
• 2x Adjustable camber plate upper mounts with spherical monoball bearings
• 2x Braided stainless steel leader hoses
• 2x Sway bar end links
• 1x Spanner wrench
• 2x Damping adjustment knobs
• 2x Damping knob grommets
• 2x 1/4" FNPT x 1/4" PTC air fittings
• 2x 1/4" FNPT x 3/8" PTC air fittings
• Note: 3/8" PTC-to-PTC inline fittings are NOT included - must be purchased separately
• Note: Air management system, air tank, compressor, and air line are NOT included

Product Description

The Air Lift Performance 76015 is the front air suspension kit for the 2005-2014 Ford Mustang S197 platform, covering all body styles - Base, GT, Convertible, and Shelby GT500. It replaces the factory front struts with a pair of threaded-body monotube air struts topped with progressive-rate double-bellows air springs, delivering up to 4.75 inches of front drop from stock ride height while maintaining full adjustability at any point in that range. The 32-level external damping adjustment lets the driver tune compression and rebound independently at each corner - from a compliant, street-comfortable setting to a tight, track-focused tune - without removing the struts or using external tools beyond the included adjustment knobs. Integrated adjustable camber plates at the upper mounts use high-quality spherical monoball bearings to eliminate rubber compliance and deliver the direct steering response and precise alignment adjustment that serious builders and track drivers demand.

Installation at the front requires no chassis modifications - the kit bolts directly to the S197's front subframe and steering knuckle using OEM mounting locations. Included sway bar end links restore proper sway bar geometry after lowering to prevent bind and maintain the intended roll stiffness of the factory front anti-roll bar. The braided stainless leader hoses connect the struts to the rest of the air management system, which must be sourced separately. Air Lift Performance's 3P (pressure-based) and 3H (height and pressure sensor) management systems are both compatible. The 3P system controls height via preset pressure targets, while the 3H adds physical height sensors that allow the system to auto-compensate for load changes - both offer mobile app control via Android and iOS. Air line in 1/4" or 3/8" diameter is compatible, with 1/4" recommended for smoother height transitions and easier installation routing.

This is a front-only kit. Owners building a full air suspension system will need to pair the 76015 with the companion rear kit, PN 76515, which requires drilling two holes near the rear spring location covered by interior trim. Note that 3/8" PTC-to-PTC inline fittings are not included with this kit and must be purchased separately. The 76015 is backed by Air Lift Performance's 1-year unlimited mileage warranty and is validated through real-world testing on racetracks and road courses, delivering ride and handling that meets or exceeds the factory S197 suspension in every measurable dimension.