Air Lift 79017 Coilover Kit 2008-2023 Dodge Challenger/Charger/Chrysler 300 RWD

Vehicle Fitment

• 2008-2023 Dodge Challenger (RWD) - Excludes Scat Pack, Hellcat, and Demon models
• 2011-2023 Dodge Charger (RWD) - Excludes Scat Pack, Hellcat, and Demon models
• 2011-2023 Chrysler 300 / 300C (RWD) - Excludes Scat Pack, Hellcat, and Demon models

Fitment Notes

• Does NOT fit Dodge Challenger Scat Pack, SRT Hellcat, SRT Hellcat Redeye, SRT Hellcat Widebody, SRT Demon, SRT Demon 170, or any Demon/Hellcat variant - these performance trims use a different front suspension geometry and larger-diameter front struts incompatible with this kit
• Does NOT fit Dodge Charger Scat Pack, SRT Hellcat, SRT Hellcat Widebody, SRT 392, or Demon-equivalent trims
• Does NOT fit Chrysler 300 SRT8 or equivalent performance-suspension trim variants
• RWD applications only - AWD Chrysler 300 and Charger AWD variants are not compatible
• This is a static coilover kit - ride height is adjusted mechanically via threaded shock body; it is not an air suspension kit and does not require an air source
• Convertible to a full air suspension system in the future via an Air Lift Performance coilover-to-air conversion kit (listed as Coming Soon at time of publication - verify current availability with Air Lift Performance)
• Bolt-on installation - no chassis modifications required

Features

• Complete front and rear coilover kit covering all four corners - replaces factory springs and struts/shocks with a purpose-built lowered performance suspension without the need for air adjustability
• 32-level single-knob damping adjustment on all four corners allows tuning from a compliant daily street setting to a firm, performance-focused setup without removing the coilovers
• Air Lift Performance engineered vehicle-specific valving and upgraded internal pressure for improved ride quality, handling response, and body control compared to the factory suspension
• Anodized aluminum damper bodies, top mounts, locking collars, and spring perches are lightweight and fully corrosion resistant for long-term underbody durability
• Vehicle-specific upper and lower mounts engineered for direct OEM bolt-on installation - no cutting, drilling, or fabrication required
• Adjustable rear coil spring perches allow independent rear ride height fine-tuning for optimal stance and corner weight balance
• Threaded shock body design provides a wide range of ride height adjustment for a lowered static stance at any desired height within the kit's travel range
• Designed as a gateway to air suspension - can be upgraded to a full Air Lift Performance air ride system via a coilover-to-air conversion kit, making it a low-cost entry point for builds that may go to air in the future
• Backed by Air Lift Performance's 1-year limited warranty

Specifications

• Kit Type: Full coilover (static, non-air)
• Position: All four corners (front and rear)
• Damper Type: Monotube, threaded body
• Damper Body Finish: Anodized aluminum
• Damping Adjustment: 32-level single-knob (per corner)
• Top Mounts: Vehicle-specific, anodized aluminum
• Locking Collars: Anodized aluminum
• Spring Perches: Anodized aluminum, adjustable (rear)
• Modifications Required: None - bolt-on installation
• Air-to-Coilover Convertible: Yes - via coilover-to-air conversion kit (verify current availability)
• Drivetrain: RWD only
• Warranty: 1-year limited

Included Components

• 2x Front monotube coilover dampers with coil springs and vehicle-specific upper mounts
• 2x Rear monotube coilover dampers with coil springs and vehicle-specific lower mounts
• 2x Adjustable rear coil spring perches
• 2x Spanner wrenches
• 4x Damping adjustment knobs
• 4x Damping knob grommets
• 1x Complete mounting hardware kit

Product Description

The Air Lift Performance 79017 is a complete four-corner coilover kit for the 2008-2023 Dodge Challenger, 2011-2023 Dodge Charger, and 2011-2023 Chrysler 300/300C - all in RWD configuration. Unlike the rest of the Air Lift Performance catalog, the 79017 is a static coilover kit rather than an air suspension system. It is purpose-built for enthusiasts who want a lowered, performance-tuned stance without the cost or complexity of a full air management system, while leaving the door open to convert to air ride in the future via an Air Lift Performance coilover-to-air conversion kit. The kit covers all four corners with monotube threaded-body dampers featuring 32 levels of single-knob damping adjustment per corner, anodized aluminum damper bodies, and vehicle-specific upper and lower mounts for a direct bolt-on installation with no chassis modifications required.

Air Lift Performance engineered the valving and internal pressures specifically for the Chrysler LX/LC platform, targeting improved body control, corner entry handling, and ride quality over the factory suspension. The adjustable rear spring perches allow the rear ride height to be fine-tuned independently of the front, giving builders the ability to achieve a level or slightly raked stance as desired. The threaded shock bodies provide a range of ride height adjustment to achieve the desired lowered stance without compromising suspension travel to the point of bottoming out on daily roads. A critical exclusion applies across all three platforms: Scat Pack, Hellcat, Hellcat Redeye, Hellcat Widebody, Demon, and Demon 170 trims use larger-diameter front struts and different suspension geometry that are not compatible with this kit. AWD variants of the Charger and Chrysler 300 are also excluded.

For builders who want to start with a lowered static stance and potentially move to full air suspension later, the 79017 is designed to accommodate a future coilover-to-air conversion kit from Air Lift Performance - a feature unique to the Air Lift coilover lineup that protects the initial investment. No air management system, compressor, tank, or air lines are required or included with this kit. The 79017 is backed by Air Lift Performance's 1-year limited warranty against defects in materials and workmanship.