aFe 55-10009R Super Stock Pro 5R Induction System for 2018-2025 Jeep Wrangler JL

Vehicle Fitment

• 2018-2025 Jeep Wrangler (JL - Sport, Sport S, Sahara, Rubicon, Willys, Freedom Edition, High Altitude), V6-3.6L, 4WD
• 2018-2025 Jeep Wrangler Unlimited (JL - Sport, Sport S, Sahara, Rubicon, Willys, Freedom Edition, High Altitude), V6-3.6L, 4WD
• 2020-2025 Jeep Gladiator (JT - Sport, Sport S, Overland, Rubicon, Willys, Mojave, High Altitude), V6-3.6L, 4WD

Fitment Notes

• Fits V6-3.6L Pentastar naturally aspirated engine configurations only. Does not fit the Wrangler JL or Gladiator JT equipped with the 2.0L turbocharged engine, 3.0L EcoDiesel, or 6.4L V8-392 engine.
• Does not fit Wrangler 4xe (plug-in hybrid) models - the 4xe uses a 2.0L turbocharged engine, not the 3.6L Pentastar.
• Does not fit the Wrangler JK (2007-2018) or any prior Wrangler generation.
• This system is compatible with the aFe POWER Jeep JL/JT Snorkel - it is the only aFe intake system that fully retains the factory water-tight airbox seal required for snorkel use.
• Tube design utilizes the factory mounting grommets to fasten to the radiator shroud - no cutting, drilling, or permanent modification required.
• This product is not CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Features

• Unique IRF (Inverted Replacement Filter) design fills the full depth of the OE airbox to maximize filter surface area, airflow, and performance - all while keeping the factory filter housing, airbox, and sealing structure fully intact.
• Outflows the factory intake system by 4% with a measured flow rate of 270 CFM @ 7" H2O - delivering additional performance within the factory airbox footprint.
• Pro 5R filter media uses five layers of progressively finer pre-oiled cotton gauze for maximum airflow and the highest performance gains of any aFe filter media option - ideal for street and track use and well-suited to owners who want the most flow from this system.
• Pro 5R filter maintains strong airflow performance even when dirty due to its progressive layering - providing consistent filtration capacity across longer service intervals.
• Dyno-tuned XLPE (cross-linked polyethylene) intake tube replaces the factory intake tube with a computer-designed, turbulence-minimizing geometry engineered for improved volumetric efficiency and a direct, perfect fit.
• XLPE tube material is heat-soak resistant and extremely durable - maintaining dimensional integrity across the wide temperature ranges experienced in Jeep off-road environments.
• Retains the full factory water-tight airbox seal - making this the only aFe intake system compatible with the aFe Jeep JL/JT Snorkel for water crossing protection.
• No ECU re-tuning required - the system delivers its performance improvements through optimized airflow without triggering sensor compensation or check engine lights.
• Pro 5R filter is washable and reusable - easily recharged with aFe POWER Cleaner and blue air filter oil for continued high-flow performance over the life of the vehicle.
• Premium stainless-steel worm clamps and silicone couplings provide a secure, durable seal at all connection points.
• Drop-in IRF filter installation - seats directly into the factory airbox with no modifications to OEM components or housing.

Specifications

• Part Number: 55-10009R
• System Type: Super Stock Induction System - Retains Factory Airbox, Replaces OEM Intake Tube and Air Filter
• Filter Design: IRF (Inverted Replacement Filter) - Fills Full Depth of OE Airbox
• Filter Media: Pro 5R - Pre-Oiled, 5-Layer Cotton Gauze, Washable & Reusable
• Measured Airflow: 270 CFM @ 7" H2O
• Airflow Improvement Over Stock: 4%
• Intake Tube Material: XLPE (Cross-Linked Polyethylene) - Dyno-Tuned, Heat-Soak Resistant, Black
• Intake Tube Mount: Uses Factory Mounting Grommets on Radiator Shroud
• Clamp Type: Stainless-Steel Worm Clamps
• Coupling Material: Silicone
• Snorkel Compatible: Yes - Compatible with aFe Jeep JL/JT Snorkel (retains factory airbox seal)
• ECU Re-Tune Required: No
• Engine Compatibility: V6-3.6L Pentastar (naturally aspirated) only
• Drivetrain: 4WD
• Tube Color: Black
• CARB Status: Not CARB Exempt - not for sale or use in California

Included Components

• 1x Pro 5R IRF Air Filter (inverted replacement filter, pre-oiled 5-layer cotton gauze, drop-in for factory airbox)
• 1x Dyno-Tuned XLPE Intake Tube (black, heat-soak resistant)
• 1x Set of Premium Stainless-Steel Worm Clamps
• 1x Set of Silicone Couplings

Product Description

The aFe POWER 55-10009R Super Stock Induction System is engineered for 2018-2025 Jeep Wrangler JL and 2020-2025 Gladiator JT owners who want the maximum airflow performance available within the factory airbox structure, with the Pro 5R oiled filter delivering the highest flow rate of any aFe filter media option. Like its Pro DRY S counterpart (55-10009D), the 55-10009R uses aFe's patented IRF (Inverted Replacement Filter) design - a filter shaped to fill the full interior depth of the OE airbox - to outflow the factory system by 4% and deliver 270 CFM of measured airflow without touching the factory airbox housing, seal, or mounting structure. The system is a direct drop-in replacement for the OEM filter and intake tube, requiring no modifications and no ECU retune.

The Pro 5R filter uses five layers of progressively finer pre-oiled cotton gauze media in a 100% polyurethane frame. Compared to the three-layer dry synthetic media in the Pro DRY S, the Pro 5R's additional oiled layers deliver greater airflow capacity and stronger performance gains - making it the preferred choice for owners who prioritize maximum performance over minimal maintenance. The filter maintains airflow even as it accumulates debris due to its progressive layering design, and it is fully washable and reusable using aFe POWER Cleaner and blue filter oil. The dyno-tuned XLPE intake tube completes the system by replacing the factory tube with a turbulence-minimized, heat-soak-resistant design that mounts using factory grommets on the radiator shroud.

A key differentiator of the Super Stock system over other aFe JL/JT intake options is its full retention of the factory airbox and water-tight seal - making it the only aFe intake compatible with the aFe Jeep JL/JT Snorkel for water crossing protection. Fitment covers all V6-3.6L trims of the Wrangler JL and Gladiator JT, including Sport, Sahara, Rubicon, Willys, Mojave, and High Altitude. It does not fit the 2.0L turbo, 3.0L EcoDiesel, 6.4L V8-392, or any 4xe hybrid Wrangler variant. This product is not CARB exempt and is not legal for sale or use in California.