aFe TF-9023R Takeda Pro 5R Oiled Conical Air Filter 3 in x 5 in x 6 in Universal

Vehicle Fitment

• Universal conical clamp-on air filter - fits any 3-inch (76mm) intake tube or cold air intake system using a 3-inch inlet connection
• Direct replacement filter for aFe Takeda Stage-2 and other Takeda intake systems specifying TF-9023R
• Compatible with any intake system, velocity stack, or turbo inlet requiring a 3-inch clamp-on conical filter with 5-inch base and 6-inch height

Fitment Notes

• The TF-9023R is a universal clamp-on conical filter - fit is determined by the 3-inch flange diameter. Confirm that the intake tube or connection point on your application measures 3 inches (76mm) OD before ordering.
• This is the Pro 5R oiled cotton gauze version. The companion dry (oil-free) version is aFe TF-9023D (Pro DRY S media), same physical dimensions. Confirm the correct media type for your application - oiled filters are not recommended for vehicles with sensitive MAF sensors that can be contaminated by filter oil.
• A rubber coupler is included with the filter for installation on the intake tube.
• Sold individually - one filter per package.

Features

• Pro 5R Five-Layer Oiled Cotton Gauze Media - Maximum Flow and Filtration: The TF-9023R uses aFe's Pro 5R filter media - five layers of progressively finer mesh cotton gauze, pre-oiled for performance. Each successive layer provides progressively finer filtration while maintaining outstanding airflow, allowing the filter to capture a high percentage of particulates without the restriction typical of finer-mesh dry filters. The pre-oiled cotton gauze media is the same technology used in aFe's most demanding high-flow performance intake applications.
• Tall, Open, Evenly Spaced Pleats - Extended Service Intervals: The filter's tall, open pleats provide substantial media surface area and exceptional dust holding capacity - allowing longer service intervals between cleaning cycles while maintaining consistent airflow performance as the filter accumulates contamination. Deep pleat spacing prevents premature clogging in dusty environments.
• 100% Polyurethane Top and Bottom Frame: The top and base are constructed of 100% polyurethane - providing structural rigidity, dimensional stability, and resistance to fuel, oil, and heat exposure in the engine bay while remaining pliable enough to maintain a positive seal against the intake tube and velocity stack across varying temperatures.
• Integrated Urethane Bump Seal - No-Leak Connection: The 3-inch flange features an integrated polyurethane bump seal that creates a positive, no-leak connection against the intake tube when the hose clamp is tightened - preventing unfiltered air from bypassing the filter between the flange and tube over the life of the filter.
• Washable and Reusable: The TF-9023R can be cleaned with aFe's filter cleaning solution, rinsed with water, dried, and re-oiled for continued service - eliminating the recurring cost of disposable paper filter replacements. Multiple cleaning cycles are supported without media degradation.
• Conical Shape - DOM (Double Open Mouth) Design: The conical shape maximizes the filter surface area presented to incoming airflow while keeping the overall package compact for installation in tight intake tube routing. The DOM configuration (open at both the flange and top) allows airflow through the full filter surface area.

Specifications

• Part Number: TF-9023R
• Brand: aFe Power (Takeda series)
• Product Type: Universal Conical Clamp-On Replacement Air Filter
• Filter Media: Pro 5R - Five-Layer Oiled Cotton Gauze
• Color: Blue
• Flange Diameter (F): 3 in (76mm)
• Base Diameter (B): 5 in (127mm)
• Top Diameter (T): 2-3/4 in (70mm)
• Height (H): 6 in (152mm)
• Filter Style: Conical, DOM (Double Open Mouth)
• Frame Material: 100% Polyurethane (top and base)
• Seal: Integrated urethane bump seal
• Oiling Required: Yes (Pro 5R media - pre-oiled; re-oil after cleaning)
• Washable / Reusable: Yes
• Coupler Included: Yes
• UPC: 802959529386
• Fitment: Universal (3-inch inlet)
• Quantity: 1 (sold individually)

Included Components

• 1x aFe Takeda Pro 5R Conical Air Filter (TF-9023R)
• 1x Rubber Coupler

Product Description

The aFe TF-9023R is a Takeda Pro 5R universal conical clamp-on air filter - a direct service replacement for aFe Takeda intake systems and a high-performance upgrade for any intake system using a 3-inch inlet tube. The 3 x 5 x 6-inch conical filter uses aFe's Pro 5R five-layer oiled cotton gauze media between a 100% polyurethane top and base, delivering exceptional airflow for maximum horsepower and torque output with effective particulate filtration.

The tall, open, evenly spaced pleats provide outstanding dust-holding capacity for extended service intervals. The integrated urethane bump seal on the 3-inch flange ensures a positive no-leak connection to the intake tube when clamped. A rubber coupler is included. Washable and reusable - clean with aFe filter cleaner, rinse, dry, and re-oil with aFe Pro 5R filter oil (PN 90-50001 restore kit). The companion oil-free version is TF-9023D (Pro DRY S media, same dimensions). Universal fit for any 3-inch inlet application.