aFe 54-76008 Momentum GT Pro 5R Cold Air Intake for 2009-23 Toyota Land Cruiser

Vehicle Fitment

• 2009-2023 Toyota Land Cruiser (J70 - GRJ76 Wagon / GRJ78 Troop Carrier / GRJ79 Double-Cab Pickup), V6-4.0L (1GR-FE), 4WD

Fitment Notes

• Fits Toyota Land Cruiser J70 variants equipped with the 1GR-FE V6-4.0L petrol engine only - this engine was introduced to the J70 platform in 2009.
• Does not fit J70 models equipped with diesel engines (1VD-FTV, 1HZ, 1HD-T, etc.).
• Covers all petrol-engined J70 body configurations sold internationally with the 1GR-FE engine, including GRJ76 (4-door wagon), GRJ78 (troop carrier), and GRJ79 (double-cab pickup).
• The Toyota Land Cruiser J70 is not sold in the United States; no CARB EO# is required for this product as a result.
• Compatible with left-hand drive and right-hand drive configurations where the 1GR-FE engine and J70 platform are sold (Middle East, South America, Africa, Australia, Japan).

Features

• Dyno-proven gains of +20 horsepower and +22 lb-ft of torque on the V6-4.0L 1GR-FE engine, with an airflow improvement of +118% over the factory intake system.
• 400 CFM measured flow rate at 7" H2O - purpose-engineered to unlock the full breathing potential of the 1GR-FE's naturally aspirated V6 architecture.
• Unique one-piece sealed roto-molded XLPE (cross-linked polyethylene) housing draws in the coolest available underhood air while isolating the filter from warm engine bay temperatures, maximizing air charge density.
• Large clear sight window built into the housing allows for filter inspection without removing the airbox - ideal for owners who run the J70 in demanding off-road and dusty environments where filter monitoring is important.
• Auxiliary air scoop built into the housing increases airflow draw during acceleration; a urethane plug is included to block the scoop in cold weather or extremely dusty conditions.
• Massive 9-inch tall inverted-top oval conical Pro 5R performance air filter with a large (6-3/4" x 4-3/4") oval flange - engineered to maximize filter surface area and airflow capacity while maintaining 98.6% filtration efficiency.
• Five layers of progressively finer pre-oiled cotton gauze media in a 100% polyurethane frame provide the highest flow rate and filtration performance of any aFe filter media option, even when dirty.
• CAD-designed, dyno-tuned roto-molded plastic intake tube is precisely shaped to maximize air velocity and volume to the throttle body while maintaining a perfect direct-fit installation.
• Premium stainless-steel clamps and all required mounting hardware included for a hassle-free installation using factory mounting points - no cutting or drilling required.

Specifications

• Part Number: 54-76008
• System Type: Momentum GT Cold Air Intake - Sealed One-Piece Housing with Auxiliary Air Scoop
• Filter Media: Pro 5R - Pre-Oiled, 5-Layer Cotton Gauze, 98.6% Filtration Efficiency
• Filter Shape: Oval Conical with Inverted Top
• Filter Flange Size: 6-3/4" x 4-3/4" (oval)
• Filter Height: 9 inches
• Filter Frame: 100% Polyurethane
• Measured Filter Flow: 400 CFM @ 7" H2O
• Housing Material: Roto-Molded XLPE (Cross-Linked Polyethylene) - Black, Heat-Soak Resistant, One-Piece Sealed
• Housing Features: Clear Sight Window, Auxiliary Air Scoop (with urethane plug)
• Intake Tube Material: CAD-Designed, Dyno-Tuned Roto-Molded Plastic
• Clamp Material: Premium Stainless Steel
• Airflow Improvement Over Stock: +118%
• Max Dyno-Tested Power Gain: +20 HP / +22 lb-ft TQ
• Engine Compatibility: V6-4.0L 1GR-FE (naturally aspirated)
• Drivetrain: 4WD
• CARB Status: No CARB EO# Required (vehicle not sold in the United States)

Included Components

• 1x Pro 5R Oval Conical Air Filter - 9" tall, inverted top, pre-oiled, 100% polyurethane frame
• 1x One-Piece Sealed XLPE Housing with Sight Window and Auxiliary Air Scoop
• 1x CAD-Designed Dyno-Tuned Roto-Molded Plastic Intake Tube
• 1x Urethane Plug (for auxiliary air scoop blockoff)
• 1x Set of Premium Stainless-Steel Clamps and Mounting Hardware

Product Description

The aFe POWER 54-76008 Momentum GT Cold Air Intake System is purpose-built for the Toyota Land Cruiser J70 equipped with the naturally aspirated V6-4.0L 1GR-FE petrol engine, covering all GRJ-series body configurations sold internationally from 2009 through 2023. This includes the GRJ76 four-door wagon, GRJ78 troop carrier, and GRJ79 double-cab pickup - all 4WD variants of the J70 platform that received the 1GR-FE engine. The Momentum GT system replaces the factory airbox with a one-piece sealed roto-molded XLPE housing engineered to source the coldest available underhood air and isolate the filter from heat soak. The result is a dyno-proven gain of +20 horsepower and +22 lb-ft of torque, with measured airflow improvement of +118% over stock - one of the largest gains available for any intake system on this platform.

At the core of the system is a massive 9-inch tall inverted-top oval conical Pro 5R air filter with a large (6-3/4" x 4-3/4") oval flange - the largest filter that could be packaged within the J70 engine bay to maximize surface area and airflow capacity. With five layers of progressively finer pre-oiled cotton gauze media in a 100% polyurethane frame and a 98.6% filtration efficiency rating, the Pro 5R maintains strong performance even as it accumulates dust - an important characteristic for the off-road, agricultural, and utility environments where the J70 is most commonly operated. The housing also features a clear sight window that allows filter inspection without removal and an auxiliary air scoop that increases airflow on demand, with an included urethane plug to seal it during dusty conditions.

The CAD-designed, dyno-tuned roto-molded plastic intake tube interfaces precisely with the factory throttle body and all OEM sensors, requiring no modifications and using factory mounting points throughout. Installation is straightforward, with all stainless-steel clamps and mounting hardware included. Because the Toyota Land Cruiser J70 is not sold in the United States, no CARB Executive Order number is required for this product. For J70 owners seeking to extract meaningful performance from the 1GR-FE V6 while maintaining reliable long-term filtration in demanding conditions, the 54-76008 is one of the most effective single-bolt-on upgrades available for the platform.