aFe Takeda 56-70073D Momentum Cold Air Intake Pro DRY S for 2021-2026 Kia K5 GT

Vehicle Fitment

• 2021-2026 Kia K5 GT (All Trims), L4-2.5L (t), FWD
• 2021-2026 Kia K5 GT-Line AWD, L4-2.5L (t), AWD

Fitment Notes

• Fits the L4-2.5L turbocharged engine only. Does not fit the Kia K5 LXS, GT-Line FWD, or EX trims, which are equipped with the L4-1.6L turbocharged engine.
• The 2.5L turbocharged engine is exclusive to the K5 GT and GT-Line AWD trim levels for model years 2021 through 2026.
• This product is not CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Billet aluminum fittings are included to allow all factory sensor connections to transfer over without modification.
• No ECU tune required - system achieves its gains through optimized airflow without triggering sensor faults or check engine lights.

Features

• Dyno-proven gains of up to +8 horsepower and +9 lb-ft of torque with the Pro DRY S filter, outflowing the factory intake by up to 23% for sharper throttle response and improved mid-range pull from the 2.5L turbocharged engine.
• Sealed one-piece XLPE housing isolates the filter from engine bay heat, ensuring the densest, coolest possible air charge reaches the turbocharger with every intake stroke.
• Patent-pending filter-to-housing interface maximizes the filter size packaged within the system, with the 360-degree radial-flow filter featuring an inverted top to increase usable surface area and extend service intervals.
• Clear sight window built into the housing allows for quick filter inspection without removing or disassembling the system - ideal for monitoring filter condition between cleanings.
• Auxiliary air inlet lets the system draw supplementary air from the engine compartment when additional flow is desired; a plug is included to seal it for maximum heat isolation.
• Pro DRY S filter media uses three layers of progressively denser oil-free synthetic - requiring no oil during installation or maintenance, making it the lowest-upkeep aFe filter option and a natural fit for daily drivers who want performance without fuss.
• Dyno-tuned XLPE intake tube features a Takeda import-inspired design engineered for maximum volumetric efficiency, heat-soak resistance, and a direct precise fit on the K5's 2.5T engine bay layout.
• Included billet aluminum fittings ensure all factory IAT sensor and other OEM connections transfer over cleanly without modification.
• Stainless-steel clamps and reinforced silicone couplings provide a durable airtight seal at all connection points for long-term reliability.
• Designed with minimal hardware and a smart filter-to-housing interface for a fast, straightforward installation.
• Pro DRY S filter is washable and reusable - rechargeable with aFe POWER Cleaner with no re-oiling step required.

Specifications

• Part Number: 56-70073D
• Product Line: Takeda Momentum Cold Air Intake System
• Filter Media: Pro DRY S - Oil-Free, 3-Layer Progressive Synthetic, Washable & Reusable
• Filter Flow Direction: 360-Degree Radial Flow, Inverted Top
• Airflow Improvement Over Stock: Up to 23%
• Max Dyno-Tested Power Gain: Up to +8 HP / +9 lb-ft TQ
• Housing Material: One-Piece XLPE (Cross-Linked Polyethylene) - Sealed, Heat-Soak Resistant
• Housing Features: Clear Sight Window, Auxiliary Air Inlet (with plug)
• Intake Tube Material: XLPE - Dyno-Tuned, Heat-Soak Resistant, Takeda Import Design
• Fittings: Billet Aluminum (included for OEM sensor connections)
• Clamp Type: Stainless Steel
• Coupling Material: Reinforced Silicone
• ECU Re-Tune Required: No
• Engine Compatibility: L4-2.5L Turbocharged (K5 GT / GT-Line AWD only)
• Drivetrain: FWD (GT) / AWD (GT-Line AWD)
• CARB Status: Not CARB Exempt - not for sale or use in California

Included Components

• 1x Pro DRY S Air Filter - 360-degree radial flow, inverted top, oil-free 3-layer synthetic
• 1x One-Piece Sealed XLPE Housing with Sight Window and Auxiliary Air Inlet
• 1x Dyno-Tuned XLPE Intake Tube - Takeda Import Design
• 1x Auxiliary Air Inlet Plug
• 1x Set of Billet Aluminum Fittings (for OEM sensor connections)
• 1x Set of Stainless-Steel Clamps and Reinforced Silicone Couplings

Product Description

The aFe POWER Takeda 56-70073D Momentum Cold Air Intake System is engineered specifically for the turbocharged L4-2.5L engine found in the 2021-2026 Kia K5 GT and GT-Line AWD - the performance variants of the K5 lineup equipped with the 290-horsepower 2.5T engine. This is not a universal fit; it does not fit the 1.6T-powered K5 LXS, GT-Line FWD, or EX trims. As part of aFe's Takeda sport compact performance line, the system combines a sealed one-piece XLPE housing with a dyno-tuned import-inspired intake tube and a Pro DRY S oil-free filter to outflow the factory intake by up to 23%, delivering dyno-proven gains of up to +8 horsepower and +9 lb-ft of torque without requiring any ECU tune.

The Pro DRY S filter's three-layer oil-free synthetic construction requires no oiling at any stage - simply wash with aFe POWER Cleaner and reinstall dry. The inverted top filter design maximizes usable surface area within the sealed housing for extended service intervals, and the clear sight window allows instant filter inspection without disassembly. An auxiliary air inlet with included plug gives owners the option to supplement airflow from the engine compartment or maintain full heat shielding by sealing it off. Billet aluminum fittings are included for seamless OEM sensor integration, and stainless-steel clamps with reinforced silicone couplings seal every connection point. Installation is minimal-hardware and straightforward, requiring no cutting or drilling.

For K5 GT owners who want the maximum available power from this system, the oiled Pro 5R version (56-70073R) is also available and delivers higher dyno gains on the same platform. The 56-70073D is the preferred choice for owners who prioritize low maintenance and everyday convenience. This product is not CARB exempt and is not legal for sale or use in California.