aFe 50-70129D Momentum GT Pro DRY S Intake for 2023-2025 Ford F-250/F-350 V8-7.3

Vehicle Fitment

• 2023-2025 Ford F-250 Super Duty, V8-7.3L ("Godzilla"), 2WD and 4WD - All cab configurations (Regular Cab, SuperCab, Crew Cab)
• 2023-2025 Ford F-350 Super Duty, V8-7.3L ("Godzilla"), 2WD and 4WD - All cab configurations (Regular Cab, SuperCab, Crew Cab)

Fitment Notes

• Compatible with all major trim levels including XL, XLT, Lariat, King Ranch, Platinum, Limited, Tremor, STX, and FX4 - verify individual fitment for specialty configurations.
• Fits both 2WD and 4WD drivetrains; all cab and bed combinations share the same intake routing on this platform.
• The optional auxiliary air inlet in the housing can be used to draw in additional air for further performance gains, or sealed with the included plug for standard operation.
• This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
• Direct bolt-on installation using factory mounting locations - no cutting, drilling, or modifications required.

Features

• Momentum GT cold air intake system purpose-built for the redesigned 2023-2025 Ford F-250 and F-350 Super Duty equipped with the naturally aspirated V8-7.3L "Godzilla" engine.
• Dyno-tuned for maximum power gains - computer-designed intake tube optimizes airflow velocity and volume for improved horsepower, torque, and throttle response over the factory intake.
• Pro DRY S filter media: three layers of progressive oil-free synthetic media for excellent filtration efficiency and dust holding capacity - no oil required at any service interval.
• 360-degree radial flow filter design with an inverted top - maximizes filter surface area within the housing for extended service intervals between cleanings.
• One-piece sealed XLPE (cross-linked polyethylene) housing - heat-soak resistant; features a built-in air inlet scoop that connects to the factory air inlet using no additional hardware.
• Optional auxiliary air inlet port on housing allows for additional airflow intake when open, or can be sealed with the included plug for standard use.
• Large clear sight window allows convenient visual filter inspection at any time without removing or disassembling the system.
• Patented filter-to-housing interface (US PAT 9440175) minimizes total part count for a fast, straightforward installation.
• Stainless-steel clamps and premium bellows coupling provide a secure, flexible, and durable connection throughout the intake path.
• Washable and reusable Pro DRY S filter - maintenance-free with no re-oiling required. Clean with water, dry, and reinstall.
• Fewer parts than competing systems - Momentum GT intakes are designed for quick installation without compromise.
• Engineered and manufactured at aFe POWER's Corona, California facility.

Specifications

• Part Number: 50-70129D
• Series: Momentum GT
• Filter Media: Pro DRY S (oil-free, 3-layer synthetic, washable and reusable)
• Filter Style: 360-degree radial flow, inverted top
• Housing Material: Cross-Linked Polyethylene (XLPE) - heat-soak resistant, one-piece sealed, built-in air inlet scoop
• Auxiliary Inlet: Yes - optional auxiliary air inlet port (plug included)
• Sight Window: Large clear window for filter inspection without disassembly
• Intake Tube: Dyno-tuned XLPE (heat-soak resistant)
• Hardware: Stainless-steel clamps, premium bellows coupling
• Patents: US PAT 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, 11745129
• Installation: Direct bolt-on; factory mounting locations; no cutting required
• CARB EO#: Not currently CARB exempt - not for sale in California

Included Components

• 1x Pro DRY S air filter (360-degree radial flow, inverted top)
• 1x One-piece sealed XLPE intake housing (with built-in air inlet scoop, auxiliary inlet port, and large clear sight window)
• 1x Dyno-tuned XLPE intake tube
• 1x Hardware kit (stainless-steel clamps, premium bellows coupling, auxiliary inlet plug, and mounting hardware)

Product Description

The aFe POWER Momentum GT Cold Air Intake System with Pro DRY S Filter (PN 50-70129D) is engineered specifically for the redesigned 2023-2025 Ford F-250 and F-350 Super Duty equipped with the 7.3L "Godzilla" V8 engine - Ford's largest naturally aspirated gasoline V8 in the modern Super Duty lineup. The 7.3L Godzilla is a high-displacement, port-fuel-injected engine that responds well to intake airflow improvements, and this Momentum GT system replaces the factory airbox with a purpose-built sealed assembly that delivers cooler, denser air more directly to the throttle body. The computer-designed, dyno-tuned XLPE intake tube optimizes air velocity and volume throughout the intake path, improving throttle response, horsepower, and torque over stock.

The Pro DRY S filter media uses three layers of progressive synthetic material to capture airborne particles without the use of oil - making it the most convenient filter option for Super Duty owners who need a reliable, low-maintenance intake in demanding work and towing environments. When the filter needs cleaning, simply remove, rinse with water, allow to dry completely, and reinstall - no re-oiling kits required. The one-piece sealed XLPE housing is constructed from heat-soak resistant cross-linked polyethylene and features a built-in air inlet scoop that integrates directly with the factory air inlet pathway using no additional hardware. An optional auxiliary air inlet port is available on the housing - owners can open it to draw in supplemental air for further performance, or seal it with the included plug for standard operation. A large clear sight window allows filter inspection at any time without any disassembly.

Installation uses all factory mounting locations and requires no cutting, drilling, or fabrication - the system fits all 2023-2025 F-250 and F-350 Super Duty models with the 7.3L V8 across all cab configurations and both 2WD and 4WD drivetrains, covering trim levels from the base XL through Platinum and Limited. This product is not currently CARB exempt and cannot be sold into California. Built to aFe POWER's exacting standards and manufactured at their Corona, California facility, the Momentum GT Pro DRY S is the practical, maintenance-friendly performance intake upgrade for 2023-2025 Super Duty V8-7.3L owners who want improved airflow, cleaner filtration, and a fast bolt-on installation.