ADD AC6201801NA Ditch Light Brackets for 2021-2024 RAM 1500 TRX / 2025 RHO

Vehicle Fitment

• 2021-2024 RAM 1500 TRX
• 2019-2023 RAM 2500
• 2025 RAM 1500 RHO

Fitment Notes

• This kit is sold as a driver and passenger pair - both brackets are included in a single purchase. No additional bracket purchase is needed for a complete two-side installation.
• The brackets mount to the factory hood hinges using a fully bolt-on process. No drilling, cutting, or modification to the hood, cowl, or A-pillar is required.
• Brackets are positioned at the base of the A-pillar, placing lights at the leading edge of the hood near the windshield corners. This location keeps the lights out of the driver's primary sightline while placing them high enough for meaningful forward and side illumination coverage.
• Lights are not included. The brackets are compatible with LED pod lights from 3" up to 6" in diameter, including Rigid Industries Radiance Pods, Rigid 360 Series (up to 6"), Baja Designs LP4, and Baja Designs LP6, among others. Light mounting hardware is not included - use hardware appropriate for your chosen light model.

Features

• Designed for use with pod lights from 3" cube lights (Rigid/Baja cube pods) up to 6" round lights (Rigid 360 6", Baja Designs LP6), providing flexibility across the most common auxiliary pod light sizes in the market.
• Lights can be aimed forward for trail illumination or angled to the side for wider area coverage - the bracket geometry supports both orientations without modification, depending on where you position the light on the mount.
• Integrated wire management channels keep wiring routed cleanly along the bracket and out of sight, resulting in a professional install appearance without requiring additional conduit, zip-tie channels, or custom wiring solutions.
• Low-profile bracket form follows the OEM hood hinge geometry, sitting flush against the body line at the A-pillar base rather than projecting outward. The result is a mounted light that visually integrates with the truck's design rather than appearing added on.
• Manufactured from 1/8" American steel and finished with a hammer black powder coat applied over a sandblasted surface - the same material spec and finish process used across ADD's bumper lineup, providing strong chip and corrosion resistance for both off-road and daily-driven use.
• Fully bolt-on installation using factory hood hinge mounting points - no drilling required, and the brackets are fully removable if needed.
• Made in the USA at ADD's Chandler, Arizona manufacturing facility.

Specifications

• Part Number: AC6201801NA
• Type: Ditch Light Brackets - Hood Hinge Mount
• Sold As: Pair (Driver Side + Passenger Side)
• Material: 1/8" steel
• Finish: Hammer black powder coat (sandblasted)
• Compatible Light Size: 3" cube to 6" round pod lights
• Light Brands Shown: Rigid Industries, Baja Designs (lights not included)
• Light Aim: Adjustable - forward or side-angled
• Wire Management: Integrated
• Installation: Fully bolt-on, mounts to factory hood hinges
• Lights Included: No
• Country of Origin: Made in USA

Included Components

• 1x Driver Side Ditch Light Bracket
• 1x Passenger Side Ditch Light Bracket
• Mounting hardware kit
• Installation instructions

Product Description

The Addictive Desert Designs AC6201801NA Ditch Light Brackets are a bolt-on driver and passenger bracket pair for the 2021-2024 RAM 1500 TRX, 2019-2023 RAM 2500, and 2025 RAM 1500 RHO. They mount to the factory hood hinges and position LED pod lights at the A-pillar base - one of the most effective ditch-light locations on the truck, providing high-mounted forward or side lighting coverage that stays out of the driver's sightline and doesn't require any modification to the factory body panels.

The bracket is compatible with pod lights ranging from 3" cube lights to 6" round lights, including the Rigid 360 Series, Baja Designs LP4 and LP6, and similar-diameter pods from other manufacturers. Forward aim maximizes trail visibility ahead of the truck; side aim works for campsite illumination, navigating tight desert tracks, or covering the width of the truck at switchbacks and wash crossings. Integrated wire management handles routing cleanly along the bracket length, keeping the wiring hidden without additional conduit work.

The 1/8" steel construction and hammer black powder coat finish over a sandblasted surface match the durability and finish quality of ADD's full bumper lineup. Installation is fully bolt-on at the factory hood hinge - no drilling, no permanent modification, and fully reversible. Lights are not included; pair with your preferred 3"-6" pod lights and their respective mounting hardware.