Action Clutch ACR-1145-884006P Stage 3 Kit for 2001-2007 Lancer Evolution 7-9

Vehicle Fitment

• 2001-2007 Mitsubishi Lancer Evolution VII/8/IX, 2.0L DOHC I4 4G63 Turbo, AWD, manual transmission

Fitment Notes

• Designed specifically for Mitsubishi Lancer Evolution 7-9 with the 2.0L 4G63 turbocharged engine and AWD drivetrain.
• Manual-transmission application only.
• Includes ACT Monoloc configuration identified by the -884006P suffix.
• Verify flywheel and transmission configuration before installation.

Features

• Action Clutch Stage 3 (1MS) single-disc performance clutch kit.
• Heavy-duty single-diaphragm pressure plate.
• Reinforced pressure-plate drive straps.
• Sprung MIBA ceramic clutch disc.
• 6-puck high-torque disc configuration.
• Approximately 170% increased holding capacity over the factory clutch.
• Designed for heavy-duty street use.
• Suitable for occasional drag, road, and drift racing applications.
• Fully enclosed spring retainers help keep disc springs secured.
• Quicker engagement compared with conventional organic street-disc designs.
• Designed for low-to-mild horsepower performance applications.
• Includes ACT Monoloc release-bearing system configuration.

Specifications

• Brand: Action Clutch
• Part Number: ACR-1145-884006P
• Product Type: Stage 3 single-disc clutch kit
• Stage: 3 (1MS)
• Disc Type: 6-puck sprung ceramic
• Disc Material: MIBA ceramic
• Pressure Plate: Heavy-duty pull-type diaphragm
• Holding Capacity: 170% increase over factory kit
• Transmission: Manual
• Drivetrain: AWD
• Engine: 2.0L DOHC I4 4G63 Turbo
• Application: Mitsubishi Lancer Evolution 7-9

Included Components

• 1x Stage 3 Heavy-Duty Pressure Plate
• 1x 6-Puck Sprung MIBA Ceramic Clutch Disc
• 1x ACT Monoloc Release-Bearing System

Product Description

The Action Clutch ACR-1145-884006P Stage 3 (1MS) clutch kit is engineered for Mitsubishi Lancer Evolution 7-9 models equipped with the 2.0L DOHC 4G63 turbocharged engine, AWD drivetrain, and manual transmission. The kit combines a heavy-duty single-diaphragm pressure plate with reinforced drive straps and a 6-puck sprung MIBA ceramic disc to provide substantially greater clutch holding capacity than the factory setup.

Action Clutch rates this Stage 3 combination at approximately 170% increased holding capacity over the factory clutch. It is intended primarily for heavy-duty street use with occasional drag, road, or drift racing. The sprung ceramic disc provides quicker engagement, while some clutch chatter can occur during initial break-in and generally decreases as the clutch beds in.

The ACR-1145-884006P configuration includes the ACT Monoloc release-bearing system and is intended for the 2001-2007 Mitsubishi Lancer Evolution 7-9 platform. Confirm the vehicle's 4G63 engine, AWD drivetrain, manual transmission, and compatible flywheel configuration before installation.