MOMO 1076BLK-30 Daytona EVO XL FIA 8855-1999 Racing Seat Black Fiberglass HANS

Vehicle Fitment

• Universal fitment - compatible with any race vehicle equipped with side-mount seat bracket adapters
• Suitable for circuit racing, rally, hillclimb, track days, and other sanctioned motorsport events where FIA 8855-1999 seats are permitted

Fitment Notes

• Side-mount configuration - vehicle-specific MOMO or aftermarket seat bracket adapters required for installation; not included.
• Universal fitment; some chassis adaptation may be required depending on floor pan width and transmission tunnel height.
• FIA 8855-1999 certified with homologation validity expiring 2030 - verify acceptance with your sanctioning body prior to competition use.
• HANS/FHR device compatible - confirm your head restraint system is geometrically compatible with this seat's halo side bolster design before purchase.
• Removable double leg cushions included; taller drivers may remove them to lower seating position and gain additional helmet clearance.

Features

• FIA 8855-1999 certified halo racing seat - homologation valid through 2030.
• XL shell - adds approximately 1 inch of extra width over the standard Daytona EVO for drivers who need more room through the hips and shoulders.
• Anatomical comfort pads added throughout the seat back and bolsters - the key upgrade over the base Daytona, providing improved ergonomics and reduced driver fatigue during long stints.
• Side head bolsters (halo) wrap around the driver's helmet to reduce lateral head movement and enhance protection during side impacts.
• HANS/FHR compatible - engineered to work with all major frontal head restraint systems.
• MOMO patented Airnet® technical material covering all seat back cushions for superior airflow and rapid moisture permeability.
• Kinder Point surface treatment on the seating area grips the driver's suit to minimize movement under high-G cornering and braking loads.
• Fire-retardant self-extinguishing black fabric upholstery on the front shell for added passive safety.
• Exposed fiberglass composite shell on the rear - lightweight and structurally rigid.
• 5 multi-point harness openings compatible with 4-, 5-, or 6-point racing harnesses.
• Removable double leg cushions for optimized thigh support and leg placement.

Specifications

• Part Number: 1076BLK-30
• Model: Daytona EVO XL
• Color: Black
• Shell Material: Fiberglass Composite
• FIA Certification: FIA 8855-1999 (expires 2030)
• Seat Belt Openings: 5
• Mounting Type: Side Mount (4-point)
• Weight: 10.0 kg / 22.0 lbs (XL, including padding)
• External Width at Shoulders: 23.625 in.
• Height at Shoulders: 23.625 in.
• External Maximum Width at Base: 18.875 in.
• External Width at Mounting Points: 16.75 in.
• Internal Width at Hips: 16.375 in.
• Overall Height: 35.875 in.
• External Depth at Base: 18.875 in.
• Internal Width Between Helmet Bolsters: 15.125 in.
• External Width at Helmet Bolsters: 18.375 in.
• HANS Compatible: Yes
• Upholstery: Fire-Retardant Black Fabric (front); Airnet® (seat back cushions)

Included Components

• 1x MOMO Daytona EVO XL Racing Seat (1076BLK-30)
• 1x Set of Removable Double Leg Cushions

Product Description

The MOMO 1076BLK-30 Daytona EVO XL is the mid-size variant of MOMO's Daytona EVO series - one step up from the standard in shell width, and one step below the XXL - delivering the same upgraded ergonomic design as the EVO line with approximately 1 inch of additional width over the base Daytona for drivers who need more room through the hips and shoulders without moving to the full XXL footprint. The defining upgrade of the EVO over the standard Daytona is the addition of anatomical comfort pads throughout the seat back and bolsters, which materially reduce driver fatigue during endurance sessions and provide a more refined, supportive fit under sustained lateral loading.

The seat is FIA 8855-1999 homologated with this batch certified through 2030, and is HANS and FHR compatible. The fiberglass composite shell is upholstered with fire-retardant black fabric on the front, while MOMO's patented Airnet® material covers all seat back cushions for maximum airflow and moisture management. Kinder Point grip treatment on the seating surface locks the driver in place under lateral G-loads, and the redesigned harness openings allow easier multi-point harness installation and more comfortable strap placement. Removable double leg cushions support thigh placement and can be removed by taller drivers to lower seating position. Side-mount bracket adapters are required for installation and are sold separately.