KW 35230446 V3 Coilover Kit w/ HLS 4 Hydraulic Lift System for 2005-2006 Ford GT

Vehicle Fitment

• 2005–2006 Ford GT (GT40), 5.4L V8 Supercharged, RWD — Coupe

Fitment Notes

• Complete kit — includes full V3 coilover set and HLS 4 hydraulic lift system for both axles
• Vehicle-specific engineering — all components designed and tested specifically for the Ford GT
• Professional installation strongly recommended
• Technical component report included — outlines approved lowering range for the Ford GT

Features

• HLS 4 hydraulic lift system — raises both axles up to 45mm (≈1.75") at the push of a button
• Activates while driving at up to 80 km/h (50 mph) — full lift in 4–5 seconds
• Auto-lowers to set coilover ride height above programmed speed threshold
• LED control button inside vehicle — optional remote control available separately
• Self-contained hydraulic pump — does not affect ride quality or handling when driving
• V3 independent rebound and compression damping — separately adjustable for precise setup
• TVR-A (Twin Valve Rebound Adjustable) — conical low-speed bypass at slow speeds; main stage opens at high speeds
• Inox-Line stainless steel construction — 100% corrosion resistant, unlimited lifespan
• Composite spring perch — wear-resistant polyamide with stainless-steel insert
• Each damper hand built, individually serialized, and dyno tested at Fichtenberg, Germany
• Developed and tested on the Nürburgring Nordschleife and KW 7-post test center

Specifications

• Part Number: 35230446
• Coilover series: V3 Inox-Line
• HLS configuration: HLS 4 — front and rear axle
• Maximum hydraulic lift: 45mm (≈1.75")
• HLS activation speed: Up to 80 km/h (50 mph)
• Lift time: 4–5 seconds
• Damping: Independent rebound and compression, separately adjustable
• Construction: Inox-Line stainless steel
• Origin: Fichtenberg, Germany
• Warranty: KW limited lifetime (coilovers); HLS components covered under KW warranty

Included Components

• Complete KW V3 coilover set (front and rear)
• HLS 4 hydraulic lift system — self-contained pump, hydraulic lines, cylinders (front and rear)
• LED control button
• Control unit
• Technical component report
• All installation hardware

Product Description

The KW 35230446 is a Variant 3 coilover kit with HLS 4 Hydraulic Lift System for the 2005–2006 Ford GT (GT40). It is a complete, vehicle-specific kit — combining a full set of hand-built KW V3 Inox-Line coilovers with a four-corner hydraulic lift system engineered exclusively for the Ford GT platform. Every component is purpose-developed and tested for this application, and a technical component report outlining the approved lowering range for the Ford GT is included.

The HLS 4 system installs hydraulic cylinders between the spring perch and spring on all four coilovers. At the push of a button — operable while driving at up to 80 km/h (50 mph) — the system raises both axles by up to 45mm in 4–5 seconds, allowing the lowered GT to clear speed bumps, steep garage ramps, and road construction without contact. The vehicle automatically returns to the set coilover ride height above a programmed speed threshold. The self-contained hydraulic pump operates independently of the suspension's damping function — there is no compression of the cylinder while driving, meaning handling and ride quality are completely unaffected. The V3 coilovers feature independent rebound and compression damping adjustable separately via KW's patented TVR-A valve technology, tuned specifically to the Ford GT's weight and geometry on the Nürburgring Nordschleife. Each damper is hand built, individually serialized, and dyno-tested at KW's Fichtenberg, Germany facility. Inox-Line stainless steel construction provides permanent corrosion resistance.

Unparalleled street performance bred from motorsports heritage, the patented KW-valve technology -or the separate Adjustment -f rebound and compression damping, allows you to individually adapt the vehicle-specific base setup. For over 20 years, KW automotive has been the market leader and driving innovation as a manufacturer of individual suspension solutions for the road and in all types of motorsports. No matter where in the world, gearheads, automobile manufacturers and reputable tuners rely on our KW coilovers "Made in Germany". Every KW coilover kit undergoes extensive stress testing before production and is developed and manufactured exclusively in our company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of our KW quality management. For us as a German manufacturer, it goes without saying that our KW coilover kits will exceed the original equipment manufacturer quality and offer useful and innovative solutions. With an application list comprising more than 4,600 options KW guarantees an outstanding selection backed by our Limited Lifetime Warranty. 2005-2006 Ford GT (GT40)

• TVR-A (Twin Valve Rebound - Adjustable) technology - allows oil to flow passed an adjustable, conical low-speed bypass during slow damper speeds, while at higher speed, the main rebound stage valve opens for maximum fluid displacement.
• TVC-A (Twin Valve Compression - Adjustable) technology - patented compression valve allows fine tuning of low speed. During sudden high piston speeds, the low speed needle and main valve blow-off feature open to maximize flow.
• Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
• Includes KW HLS4 hydraulic lift system for both axles which increases ground clearance at the push of a button. The vehicle specific HLS system includes a self-contained pump and does not affect ride quality or handling.
• Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.
• V3 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany. Each damper is dyno tested to ensure accuracy before being released for delivery.
• Seamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.
• Road legal motorsports technology featuring independent rebound and compression adjustability and application specific spring and damper tuning resulting in unparalleled street performance.

Enhance your 2005-2006 Ford GT with the KW HLS Ford GT coilover suspension kit, engineered for superior street performance and motorsport-inspired handling. Crafted in Germany by KW automotive, this kit features high-quality dampers, springs, and elastomer spring elements designed to significantly reduce pitching and rolling during evasive maneuvers, cornering, acceleration, and braking. The result is a more stable ride with shortened braking distances and improved driver confidence in everyday driving conditions.
The innovative design includes independent rebound and compression stage damping, allowing precise customization to match your personal driving style or vehicle modifications. The patented TVR-A (Twin Valve Rebound - Adjustable) technology controls oil flow during slow damper speeds, providing consistent rebound behavior, while the TVC-A (Twin Valve Compression - Adjustable) technology offers fine-tuning of low-speed compression for optimal grip and handling. These features enable drivers to adjust steering response, stability, and cornering grip with ease, ensuring a tailored setup for various driving scenarios.
Constructed with durability in mind, the KW HLS coilovers incorporate Inox-Line stainless steel for permanent corrosion resistance and composite spring perches made from wear-resistant polyamide composite, which prevent oxidation and maximize strength. The inclusion of the KW HLS4 hydraulic lift system allows for simple ground clearance adjustments at the push of a button without compromising ride quality or handling. Each damper is dyno-tested, hand-built, and uniquely serialized at the KW headquarters in Fichtenberg, Germany, ensuring precision and quality control.
Designed for enthusiasts and performance-oriented drivers, this suspension kit provides seamless ride height adjustment and application-specific tuning, making it ideal for those seeking motorsport-grade handling on the street. With over 20 years of industry leadership, KW automotive guarantees durability, innovation, and performance, backed by a Limited Lifetime Warranty. Whether you’re looking to improve handling, cornering, or ground clearance, the KW HLS Ford GT coilover kit delivers unmatched versatility and quality for your vehicle.

Features:

• TVR-A technology: Allows oil flow pass an adjustable low-speed bypass for consistent rebound at slow damper speeds

• TVC-A technology: Patented compression valve for fine low-speed damping adjustments and maximum flow during rapid piston movements

• Composite spring perch: Made from wear-resistant polyamide with stainless-steel insert for oxidation resistance and strength

• Hydraulic lift system: KW HLS4 for ground clearance adjustment at the push of a button, without affecting ride quality

• Inox-Line stainless steel: Provides permanent corrosion resistance for unlimited lifespan

• Hand-built and dyno-tested: Each damper is individually assembled and tested at KW headquarters in Germany

• Seamless ride height adjustment: Easy to set your preferred look and stance

• Motorsport-inspired design: Featuring independent rebound and compression damping for precise handling and stability