Camburg CAM-310006 1" Uniball Upper Arms for 2000-2006 Tundra & 2001-2007 Toyota

Vehicle Fitment

• 2000-2006 Toyota Tundra (2WD/4WD, All Trims, 3.4L V6 / 4.7L V8)
• 2001-2007 Toyota Sequoia (2WD/4WD, All Trims, 4.7L V8)

Fitment Notes

• Designed for 1-3 inches of lift - arms correct suspension geometry for lifted applications and are not suited for stock ride height use
• Some wheel and tire combinations may require trimming the plastic inner fender liner to eliminate rubbing
• Arms are fully rebuildable - replacement uniballs and rebuild kits are available separately
• Flush-mount hardware design provides additional clearance between the arm and inner fender compared to OEM-style hardware
• Designed for off-road use only - not intended for on-highway use

Features

• FK 1.00" PTFE-lined uniball bearing pre-installed, replacing the factory ball-joint for greater strength, misalignment range, and maximum wheel travel
• 0.156"-thick wall round tubing delivers superior rigidity and impact resistance over the stock stamped steel arms
• Engineered with increased caster and corrected camber curve to restore proper suspension geometry on lifted Tundras and Sequoias
• Flush-mount hardware provides additional tire and shock clearance over the stock stamped arm profile
• Tubes are CNC laser cut and CNC bent, then MIG welded in precision fixtures for consistent geometry across every set
• Sandblasted and steel gray powder-coated finish for long-term corrosion resistance
• Polyurethane frame pivot bushings with greaseable zerk fittings for routine field maintenance
• Heat-treated stainless steel uniball mis-alignment spacers machined in-house at Camburg
• Fully rebuildable design - extends the service life of the kit significantly
• Designed and manufactured in the USA using FARO laser scan arm precision geometry modeling

Specifications

• Part Number: CAM-310006
• Uniball Size: FK 1.00" PTFE-Lined (Pre-Installed)
• Position: Front Upper Control Arms (UCAs)
• Lift Range: 1-3 inches
• Tube Wall Thickness: 0.156 inches
• Arm Construction: CNC Laser Cut & MIG Welded Tubular Steel
• Finish: Sandblasted, Steel Gray Powder-Coat
• Spacer Material: Heat-Treated Stainless Steel
• Bushings: Polyurethane with Greaseable Zerk Fittings
• Quantity: 2 Arms per Kit
• Made In: USA

Included Components

• 2x CNC Tubular Upper Control Arms with FK 1.00" PTFE-Lined Uniballs Pre-Installed (Left and Right)
• 1x Set of Heat-Treated Stainless Steel Uniball Mis-Alignment Spacers
• 2x Polyurethane Frame Pivot Bushings with Greaseable Zerk Fittings
• 1x Hardware Kit (all necessary mounting hardware, including flush-mount pivot hardware)

Product Description

The Camburg CAM-310006 upper control arms are a direct-fit suspension upgrade for the 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia, designed to address the geometry and strength limitations of the factory upper arms when running 1-3 inches of lift. Replacing the OEM ball-joint with an FK 1.00" PTFE-lined uniball allows for significantly greater misalignment range and usable wheel travel, while the 0.156"-thick wall tubular construction provides a major strength advantage over the stock stamped steel arms. Flush-mount hardware design also creates additional clearance between the arm body and the inner fender, benefiting builds with larger tires or aggressive suspension setups.

Every set is built entirely in-house at Camburg's USA facility using CNC laser-cut tubing, MIG welded in precision fixtures, then sandblasted and steel gray powder-coated. The uniballs arrive pre-installed, and both the polyurethane pivot bushings and the uniball itself are fully rebuildable - replacement components are available separately, extending the working life of the kit well beyond a typical consumable part. All hardware is included for a straightforward bolt-on installation.