Brembo P30074 Rear Low-Met Brake Pads Hyundai Genesis Coupe Jeep GC Tesla S X

Vehicle Fitment

• 2010-2016 Hyundai Genesis Coupe (2.0T Track, 2.0T R-Spec; 3.8 Track, 3.8 R-Spec, 3.8 Ultimate - Brembo rear caliper models only; RWD)
• 2012-2013 Jeep Grand Cherokee SRT8 (6.4L V8 HEMI; 4WD)
• 2014-2018 Jeep Grand Cherokee SRT (6.4L V8 HEMI; 4WD)
• 2015 Jeep Grand Cherokee SRT8 (6.4L V8 HEMI; 4WD)
• 2018 Jeep Grand Cherokee Trackhawk (6.2L V8 Supercharged; 4WD)
• 2018 Dodge Durango SRT (6.4L V8 HEMI; AWD)
• 2012-2020 Tesla Model S (all trims with Brembo rear calipers; AWD / RWD)
• 2016-2021 Tesla Model X (all trims with Brembo rear calipers; AWD)

Fitment Notes

• Rear axle only - sold as a complete rear pad set (4 pads total)
• Hyundai Genesis Coupe fitment applies only to trims equipped with factory Brembo rear calipers (Track and R-Spec performance trims); does not fit standard base models
• Does NOT fit Jeep Grand Cherokee Laredo, Limited, Overland, or Summit - SRT / SRT8 / Trackhawk only
• Tesla fitment applies to Gen 1 and Gen 2 Model S and Gen 1 Model X - verify your caliper brand before ordering
• P30074N (NAO Ceramic variant) shares identical fitment - P30074 is the Prime Low-Met version
• OE cross-reference part numbers: 68144432AA / 583022MA10 / 105506800B / 600645300A

Features

• Prime Low-Met friction compound engineered for higher thermal demands of performance and high-output braking applications
• ECE R-90 approved - meets or exceeds OE technical specifications for all listed applications
• Multilayered ESE (Elastomer-Steel-Elastomer) "Brembo Red" shim dampens vibration and suppresses noise at pad-to-rotor contact
• Chamfered and slotted pad edges reduce NVH and improve heat dissipation during sustained or aggressive braking
• Thermal scorching treatment minimizes break-in fade for confident stopping power immediately after installation
• Low dust compound reduces brake dust accumulation on wheel faces
• Pad wear sensor equipped with acoustic wear indicator for monitoring
• Includes premium stainless steel hardware and brake lubricant for a complete bolt-on replacement

Specifications

• Position: Rear Axle
• Pad Type: Prime Low-Met (ECE R-90 approved)
• Nominal Thickness: 14.7 mm
• Pad Height: 69.1 mm
• Pad Width: 109.5 mm
• FMSI Number: 8545-D1425 / 8805-D1270
• WVA Number: 25743 / 25744
• Brake System: Brembo caliper
• Pad Wear Sensor: Acoustic wear indicator included
• OE Cross-References: 68144432AA / 583022MA10 / 105506800B / 600645300A
• Quantity: 4 pads (complete rear axle set)

Included Components

• 4x Rear Prime Low-Met brake pads (left and right, driver and passenger side)
• 1x Stainless steel hardware kit
• 1x Brake system lubricant

Product Description

The Brembo P30074 is a rear Prime Low-Met brake pad set spanning a remarkably diverse range of high-performance applications: the 2010-2016 Hyundai Genesis Coupe (Brembo-equipped performance trims), 2012-2018 Jeep Grand Cherokee SRT/SRT8/Trackhawk, 2018 Dodge Durango SRT, 2012-2020 Tesla Model S, and 2016-2021 Tesla Model X. All these vehicles share Brembo factory rear caliper systems, and the P30074 is engineered as a direct OE-equivalent replacement - cross-referencing Jeep, Hyundai, and Tesla factory part numbers with zero modification required.

The Low-Met compound is formulated to handle the elevated thermal demands of large, high-output brake systems found across these performance vehicles - from Hemi-powered Jeeps and supercharged Trackhawks to EV platforms where regenerative braking is supplemented by friction braking under hard driving conditions. With ECE R-90 compliance, Brembo's ESE multilayered shim, and integrated acoustic wear indicators, the P30074 delivers consistent, quiet rear braking with the precision fitment expected of a Brembo OE-specification product.