Synergy Mfg 8863-60 Front Lift Coil Springs for 2018-2026 Jeep JL/JLU/JT

Vehicle Fitment

• 2018-2026 Jeep Wrangler JL (2-Door, 4WD, 3.6L V6, 2.0L Turbo I4, 3.0L EcoDiesel V6, 6.4L HEMI V8, 6.2L Supercharged V8, and 4xe 2.0L Turbo Plug-In Hybrid where equipped)
• 2018-2026 Jeep Wrangler JLU (4-Door, 4WD, 3.6L V6, 2.0L Turbo I4, 3.0L EcoDiesel V6, 6.4L HEMI V8, 6.2L Supercharged V8, and 4xe 2.0L Turbo Plug-In Hybrid where equipped)
• 2020-2026 Jeep Gladiator JT (4WD, 3.6L V6 and 3.0L EcoDiesel V6 where equipped)

Fitment Notes

• Front lift coil springs are corner-specific and include separate left- and right-side springs.
• Approximate lift height varies by model, trim, drivetrain, and vehicle weight.
• 2-door JL/JT applications: approximately 7 inches of lift.
• 4-door JL/JLU applications: approximately 6 inches of lift.
• Sport: approximately 7 inches (2-door) or 6 inches (4-door).
• Rubicon: approximately 7 inches (2-door) or 6 inches (4-door).
• Diesel: approximately 5 inches; Rubicon Diesel: approximately 5 inches.
• 4xe: approximately 4 inches; 392: approximately 4 inches; Mojave: approximately 5 inches.
• XR-equipped models achieve approximately 1 inch less lift than the listed calculated heights.
• Requires a minimum of 4 inches of front bump-stop spacing.

Features

• Front lift coil spring set designed specifically for Jeep JL/JLU/JT platforms.
• True multi-rate spring design provides a softer initial rate and firmer ride rate.
• Helps support additional weight from bumpers, winches, skid plates, and trail equipment.
• Longer free length helps keep the springs seated during full suspension droop.
• Corner-specific spring design accounts for vehicle weight distribution.
• Improves front suspension ride quality and available wheel travel.
• Helps increase suspension articulation and off-road traction.
• Designed to work with up to 3/4 inch of front spacer lift without additional bump-stop spacing.
• High-strength steel construction is pre-set to help prevent sagging.
• Designed to safely cycle through full compression without overstressing the spring material.

Specifications

• Brand: Synergy Manufacturing
• Part Number: 8863-60
• Product Type: Front Lift Coil Springs
• Vehicle Platforms: Jeep Wrangler JL/JLU and Gladiator JT
• Model Years: 2018-2026 Wrangler JL/JLU; 2020-2026 Gladiator JT
• Drivetrain: 4WD
• Initial Spring Rate: 115 lb/in
• Ride Spring Rate: 120 lb/in
• Collapsed Length: 7.59 in
• Extended Length: 24 in
• Minimum Front Bump-Stop Spacing: 4 in
• Lift Height: 7 in for 2-door applications; 6 in for 4-door applications, depending on vehicle configuration

Included Components

• 1x Left Front Coil Spring
• 1x Right Front Coil Spring
• 2x Front Coil Spring Lower Isolators

Product Description

The Synergy Manufacturing 8863-60 Front Lift Coil Springs are designed specifically for 2018-2026 Jeep Wrangler JL/JLU and 2020-2026 Jeep Gladiator JT models. This high-lift front spring set uses a true multi-rate design to provide improved ride quality, additional wheel travel, and increased suspension articulation while supporting the added weight of off-road bumpers, winches, armor, and other equipment.

The corner-specific springs are engineered for the JL/JT platform's unique weight distribution, with approximately 7 inches of lift on 2-door applications and 6 inches on 4-door applications, subject to trim, drivetrain, and vehicle weight. The springs are manufactured from high-strength steel and are designed to maintain proper seating during full droop. A minimum of 4 inches of front bump-stop spacing is required for this spring specification.