Zone Offroad ZONJ2204 2" Coil Spacer Lift Kit for 2018-2026 Jeep Wrangler JL

Vehicle Fitment

• 2018-2026 Jeep Wrangler JL (Sport, Sport S, Willys, Sahara, High Altitude, Freedom, Unlimited, Rubicon, Rubicon X, High Tide, Launch Edition - 2-Door & 4-Door, 4WD, 2.0L Turbo I4 / 3.6L V6 / 3.0L V6 EcoDiesel)

Fitment Notes

• Does NOT fit 2021-2026 Jeep Wrangler JL 4xe (plug-in hybrid models)
• Does NOT fit 2021-2026 Jeep Wrangler JL Rubicon 392 (6.4L V8)
• Compatible with both gas and diesel JL models - see Pre-Installation Check in instructions to verify fitment for your specific configuration
• If you own a 2018 model, verify you have a JL and not a JK before purchasing

Features

• Adds 2 inches of front and rear suspension lift using polyurethane coil spring spacers installed on top of factory coil springs
• Retains factory spring rate and ride quality - no need to replace OEM coil springs
• Polyurethane construction provides superior noise/vibration isolation compared to steel spacers
• UV-stabilized urethane material resists breakdown and degradation from sun exposure
• Includes extended-length front sway bar links to correct sway bar operating angle after lift
• Front and rear bump stop extensions prevent coil spring overcompression and protect factory springs during hard compression events
• No-drill installation - no permanent modifications required to the vehicle
• Allows fitment of tires up to 35 inches in diameter
• FMVSS 126 (ESC System) compliant - maintains factory electronic stability control function
• Designed, tested, and manufactured in the USA from high-quality American materials
• 3-Year / 36,000-mile worry-free warranty on hard parts and wearable items, with limited lifetime warranty coverage thereafter

Specifications

• Lift Height: 2 inches (front and rear)
• Spacer Material: Polyurethane (application-specific durometer)
• Position: Front and Rear (coil spring spacers)
• Sway Bar Link Position: Front (extended length)
• Bump Stop Extension Height: 2 inches (front and rear)
• Maximum Supported Tire Size: Up to 35 inches
• Estimated Installation Time: Approximately 3 hours
• Warranty: 3 Years / 36,000 Miles (hard parts and wearables), Limited Lifetime thereafter
• UPC: 711745600577

Included Components

• 2x Front Coil Spring Spacer (Polyurethane)
• 2x Rear Coil Spring Spacer (Polyurethane)
• 2x Front Extended-Length Sway Bar Link
• 4x Hourglass Bushing
• 4x Sway Bar Link Sleeve
• 2x Front Bump Stop Extension - 2 Inches
• 2x Rear Bump Stop Extension - 2 Inches
• 1x Bolt Pack - Bump Stops
• 1x Bolt Pack - Sway Bar Links

Product Description

The Zone Offroad ZONJ2204 is a complete 2-inch coil spring spacer lift kit designed specifically for the 2018-2026 Jeep Wrangler JL. Rather than replacing your factory coil springs, this kit installs polyurethane spacers on top of them - raising ride height a full 2 inches front and rear while preserving the OEM spring rate and everyday ride comfort. The application-specific durometer polyurethane material provides superior damping of road noise and vibration compared to steel coil spacers, and UV stabilization ensures long-term durability against sun exposure and harsh trail conditions. With 2 inches of added clearance, your JL gains the ability to run tires up to 35 inches without rubbing.

This kit goes beyond a basic spacer-only lift by including all the hardware needed to maintain proper suspension geometry after the lift. Extended-length front sway bar links correct the sway bar operating angle that shifts when ride height is increased, helping to preserve factory handling characteristics. Front and rear bump stop extensions ensure your factory bump stops properly engage during hard compression events, protecting your OEM coil springs from bottoming out on the trail. All components have been tested for quality, strength, and compatibility and the entire installation requires no drilling or permanent vehicle modification - most owners complete the install in approximately 3 hours with light to moderate mechanical skill.

The ZONJ2204 fits all 2018-2026 Jeep Wrangler JL trims and body styles (2-Door and 4-Door) running gas or diesel engines, including the 2.0L Turbo I4, 3.6L V6, and 3.0L V6 EcoDiesel. It is not compatible with 4xe plug-in hybrid models or the Rubicon 392 V8 variant. Zone Offroad backs this kit with a 3-Year/36,000-mile worry-free warranty on hard parts and wearable items, transitioning to a limited lifetime warranty for the original retail purchaser thereafter. For Jeep owners who want a meaningful lift with tire clearance gains and no compromise to daily drivability, the ZONJ2204 is the straightforward, USA-made solution.