NRG HBR-003BL 50.5in Blue T-6061 Aluminum Harness Bar 4-Point Swivel Heim Joint

Vehicle Fitment

• Universal fitment - compatible with vehicles that have a B-pillar to B-pillar interior width of approximately 51-53 inches
• Measure the distance between your B-pillar seat belt harness mounting points before ordering - the HBR-003BL is NRG's largest universal harness bar and suits wider cabins
• For vehicles with a B-pillar spacing of approximately 47-50 inches, NRG's HBR-001 (47 in.) or HBR-002 (49 in.) variants are more appropriate

Fitment Notes

• Measure the interior B-pillar to B-pillar distance before purchasing - this bar is designed for vehicles in the 51-53 inch range
• NRG Innovations products are designed for off-road and track use only - not intended for street use
• Professional installation is strongly recommended; no installation instructions are included
• This harness bar does not replace a roll cage - use within a properly constructed safety environment for competition

Features

• 50.5 in. main bar length - NRG's largest universal harness bar, suited for full-size cabins and wider sport compacts
• Swiveling ends on main bar allow angle adjustment to match the vehicle's B-pillar geometry
• Two adjustable lower mounting arms with heim joint ends for precise positioning and secure lower anchorage
• Built-in harness loop on the main bar for routing lap belt or crotch strap webbing
• T-6061 aluminum construction - lightweight, corrosion-resistant, and structurally rigid
• 1.50 in. diameter main bar for maximum rigidity under load
• Blue powder-coat finish for a clean, show-quality appearance that complements NRG interiors
• 4-point mounting position - upper B-pillar mounts and two lower adjustable arms
• All mounting hardware included

Specifications

• Part Number: HBR-003BL
• UPC: 840301201832
• Bar Length: 50.5 in.
• Main Bar Diameter: 1.50 in.
• Material: T-6061 Aluminum
• Color: Blue
• Finish: Powder-Coated
• Mounting Style: 4-Point - Swiveling upper ends + 2x adjustable lower arms with heim joint ends
• Built-In Harness Loop: Yes
• B-Pillar Fitment Range: Approximately 51-53 in. between B-pillars
• Hardware: All mounting hardware included
• Quantity: 1 harness bar with hardware

Included Components

• 1x NRG HBR-003BL 50.5 in. Blue Aluminum Harness Bar
• 1x Complete Mounting Hardware Kit

Product Description

The NRG HBR-003BL is a 50.5-inch, T-6061 aluminum harness bar finished in blue powder coat - NRG's largest universal harness bar in the HBR-003 series. It is designed to provide a secure anchor point for racing harnesses in vehicles that do not have a built-in harness bar or roll cage, mounting between the B-pillars behind the front seats. The main bar features swiveling ends to accommodate varying B-pillar angles, and two adjustable lower mounting arms with heim joint ends provide solid lower anchorage and allow precise positioning. A built-in harness loop allows lap belt or crotch strap webbing to be routed through the bar cleanly.

Before ordering, measure the interior distance between your B-pillar seat belt mounting points - this bar is designed for vehicles with a spacing of approximately 51-53 inches. At 1.50 inches in diameter, the T-6061 aluminum tube provides the rigidity needed to function as a harness anchor under competition loads while adding minimal weight. All mounting hardware is included. NRG designates this product for off-road and competition use only, and professional installation is strongly recommended to ensure the bar is correctly positioned and properly torqued to the B-pillar mounting points.