Eagle CRS6136E3D 6.136" H-Beam Rods w/ ARP 2000 for 2012-2023 Ford 2.0L EcoBoost

Vehicle Fitment

• 2012-2023 Ford (Focus ST, Edge, Escape / Kuga, Fusion, Taurus, Lincoln MKZ / MKC etc.) (2.0L I4 EcoBoost, FWD / AWD as applicable)

Fitment Notes

• Only compatible with 2.0L EcoBoost engines with 22.5 mm wrist pin bore; other EcoBoost models with different pins are not supported.
• Drivetrain must match (FWD or AWD) as per original engine layout; oiling setup and clearance must be confirmed when using in non-stock applications.
• Fitment past 2023 unconfirmed; fitment confirmed through 2023.

Features

• Forged 4340 steel H-Beam design for high strength and fatigue resistance. 
• Two-piece forging with fully machined and shot-peened surfaces to relieve stress risers. 
• Weight-matched set of 4 rods for improved balance and performance. 
• Bushed for full-floating piston pin design. 
• Uses ARP 2000 bolts (3/8") for rod caps to handle high loads. 
• Center-to-center length of 6.136" ensures correct geometry in 2.0L EcoBoost block. 
• 22.5 mm wrist pin size for compatibility with EcoBoost pistons built for that bore.
• Recommended torque spec: 43 ft-lbs using ARP moly lube. 

Specifications

• Rod Length (Center-to-Center): 6.136" 
• Material: Forged 4340 steel 
• Bolt Type: 3/8" ARP 2000 bolts for rod caps 
• Full-floating pin bore size: 22.5 mm 
• Torque Spec: 43 ft-lbs with ARP moly lube only 
• Set: 4 rods (suitable for 4-cylinder engine) 
• Recommended for competition or high performance use due to strength upgrade over OE rods. 
• Fitment confirmed through 2023 for 2.0L EcoBoost; 2024-25 unconfirmed. 

Included Components

• 4x forged 4340 H-Beam connecting rods
• 4x rod caps (these are integral to the rods, 1 cap per rod)
• Bolts: 8x ARP 2000 bolts (2 per rod (big end cap))
• Installation / torque instructions including ARP bolt lube specification

Product Description

The Eagle CRS6136E3D connecting rod set is a high-performance upgrade tailored for Ford's 2.0L EcoBoost inline-4 engines. Measuring 6.136" from center-to-center, these rods are forged from durable 4340 steel with H-Beam style for improved strength, especially under boosted or high RPM conditions. They are produced via two-piece forging with fully machined, shot-peened surfaces, and come weight-matched in a set of four. Full-floating wrist pin compatibility (22.5 mm pin bore) ensures precise fit with EcoBoost-spec pistons. The ARP 2000 bolts give strong clamping and allow an appropriate torque spec of ~43 ft-lbs with ARP moly lube.

These rods are designed for 2.0L EcoBoost applications across many Ford / Lincoln models (Focus ST, Edge, Escape/Kuga, Fusion, Taurus etc.). They are ideal for builds involving higher boost, high RPM, or those wanting greater durability over stock rods. Fitment is confirmed through **2023** for this engine. 2024-25 fitment is currently unconfirmed; verify wrist pin diameter and part compatibility in your model year before installing.