Whiteline KTA318 Fixed Offset UCA for 2004-2020 Ford F-150/2006-2022 Expedition

Vehicle Fitment

• 2004-2020 Ford F-150 - XL, XLT, STX, FX2, FX4, Lariat, King Ranch, Harley-Davidson Edition, Limited, Platinum, Lariat Limited, SSV, Raptor, Police Responder and 60th Anniversary Edition; engine and drivetrain configurations vary by year; 2WD/4WD
• 2006-2022 Ford Expedition - XL, XLT, Eddie Bauer, Limited, King Ranch, EL/Max and Platinum; 5.4L V8, 6.2L V8 or 3.5L EcoBoost V6, application dependent; 2WD/4WD

Fitment Notes

• Position: Front upper control arms.
• Kit contains both driver-side and passenger-side upper control arms.
• Designed for vehicles equipped with approximately 2-4 inch suspension lifts.
• Maximum recommended wheel backspacing: 5 inches.
• Fixed-offset design; the arms are not on-car adjustable.
• Designed to correct alignment geometry on lifted vehicles by increasing available caster and negative camber range.
• Whiteline documents the F-150 application through 2020 and Expedition application through 2022.
• F-150 Raptor fitment is cataloged through 2020; verify suspension configuration when using the arms on performance/off-road variants.
• Front wheel alignment is required after installation.
• Installation should be performed by a qualified suspension technician.

Features

• Fixed-offset front upper control arm kit for lifted Ford trucks and SUVs.
• Designed for approximately 2-4 inch suspension lifts.
• Provides approximately +2.5° to +3.5° of caster increase at an approximately 2-inch lift.
• Provides up to approximately 1.5° additional negative camber range at an approximately 2-inch lift.
• Improves front suspension alignment range after lifting.
• Increases clearance between the control arm and coil-over/strut assembly.
• Improves ball-joint articulation and suspension travel.
• GIIRO maintenance-free bushing technology reduces bushing friction and maintenance requirements.
• Internal bushing grease reservoirs support continual self-lubrication.
• Synthetic elastomer bushing material resists oil, grease, ozone and weathering.
• Protective metal finish improves resistance to corrosion.
• Designed to optimize caster for improved tire contact, turn-in response and directional stability.
• Supplied as a complete left- and right-side control-arm set.
• Designed specifically for Ford F-150 and Expedition suspension platforms.

Specifications

• Brand: Whiteline
• Part Number: KTA318
• Product Type: Front Upper Control Arm Kit
• Position: Front Upper
• Adjustment Type: Fixed Offset
• On-Car Adjustable: No
• Kit Contents: 2x Upper Control Arms
• Recommended Lift Range: 2-4 inches (50-100 mm)
• Maximum Wheel Backspacing: 5 inches
• Caster Increase: Approximately +2.5° to +3.5° at approximately 2-inch lift
• Negative Camber Increase: Up to approximately 1.5° at approximately 2-inch lift
• Bushing Technology: GIIRO Maintenance-Free
• Material: Synthetic Elastomer Bushings
• Installation Time: Approximately 2 hours
• Wheel Alignment Required: Yes
• Recommended Alignment: Front Wheel Alignment
• Ford F-150 Fitment: 2004-2020
• Ford Expedition Fitment: 2006-2022
• UPC/EAN: 9319924474981

Included Components

• 2x Fixed-Offset Front Upper Control Arms
• 1x Installation Guide
• 1x Molybdenum Disulfide Assembly Grease Supply

Product Description

The Whiteline KTA318 is a fixed-offset front upper control arm kit engineered for lifted Ford F-150 and Expedition applications. Designed for vehicles with approximately 2-4 inches of lift, the arms restore additional front-end alignment range that can be lost when factory suspension geometry is altered. The offset design provides approximately +2.5° to +3.5° of caster increase and up to approximately 1.5° additional negative camber range at an approximately 2-inch lift.

The KTA318 also increases control-arm and coil-over/strut clearance while improving ball-joint articulation. Whiteline's GIIRO maintenance-free bushing technology uses synthetic elastomer construction with internal grease reservoirs to reduce friction and resist oil, grease, ozone and weathering. Protective finishes on the metal components provide additional corrosion resistance for demanding street and off-road use.

The kit contains two front upper control arms and is documented for 2004-2020 Ford F-150 and 2006-2022 Ford Expedition applications. The F-150 range includes multiple XL, XLT, STX, FX2, FX4, Lariat, King Ranch, Limited, Platinum, Raptor and other cataloged trims, while Expedition coverage includes the applicable U324/U553 platform vehicles. A front wheel alignment is required after installation.